Tag Archives: recycling machine

China wholesaler Portable HDD Shredder Hard Drive Shredder Hard Disk Shredder HDD Crusher HDD Recycling Machine with Best Sales

Product Description

Portable HDD shredder Hard drive shredder hard disk shredder HDD crusher HDD recycling machine

1. Product Introduction:

The MX300 hard disk / hard drive shredder adopts special steel and is suitable for shred desktop 3.5 inch ,laptop 2.5 inch and 1.8 inch hard disk ,  It is the new designed especially for shredding all kind of hard disk / hard drive,it`s perfect for office and data destruction.
Each rotary knife has 3 cutting edges, you can continue to use it after 90° rotation when it wear. Each stator knife has 3 cutting edges, you can continue to use it after 180° rotation when it wear.
The wheel gear reduce drive the main shaft, it has the advantages of stable running lower noise and big torque. PLC control system and positive and negative rotation as well as the emergency stop can ensure the machine working safely and stably.

2. Hard Drive Shredder -Special Features:
a).Especially suitable for shredding all kinds of computer/laptop/PC hard drive /hard disk parts,
b).Low rotation rate,low noise and large moment of torsion.
c).Using electrical control security design to ensure the safety of operators.
d).Special designed cutter with high strength and long service life.
e).Can be customized according to customer’s special requests.
f).Equipment is equipped with a trash can be collected after the broken hard disk, centralized recovery processing.
g)The shredder is equipped with overload protection to prevent damage to the machine due to overload.
h).High capacity and stable performance.
 
3. Technical Specification:

Model: MX-300
Rotate speed: 16r/m
Max. feeding size: 170×140(mm)
Output size:Below 20mm
Capacity: 50-60pcs/h(3.5inch HDD)
Max stock volume: 20kg
Overall size: 845x550x1005(LxWxH)
Blades:8pcs ¢165*55*20
Blades material:H12si
Motor: 4 kw,240/380V, single/three phase, 50/60HZ (optional)

4.Item Images

5.Package in plywood box

6.Company Information

7.FAQ

Q: I am a new investor in e waste recycling industry. Could you give us some suggestions of how to choose the suitable equipment?

A: We’d like to provide our CZPT suggestion to you. First please let us know which kind of e waste you want to recycle?and your demand on equipment working ability? It is will be highly appreciated if you can share some images

Q: What is your company’s guarantee policy

A:  All our products come with 1 year warranty. 

 

Q: I want to buy a plant of your machine,but I do not know how to install them and how to 

run the entire line .could you help me ?

 

A:Our senior engineer will make a project drawing for your reference first.

The drawing will point out the machine size/space cost. even the worker numbers suggestion.

Our engineer will help to install the machine personally.

 

Q: What can I do if the machine can not work?

A:  We appreciate that if you can send us a video to show the machine situation .

Our engineer will try to find out the problem and reply you soon. if it can not be solved through our guidance. Our engineer will come to your country and fix the problem personally

(If the machine was broken intentionally. Sorry we will not provide the above sevices )

 

 

Q: How I go to visit your factory?

A: Our factory located at Xihu (West Lake) Dis. County,HangZhou city,ZheJiang Province. We have an office in HangZhou city .We suggest you go to HangZhou city first by plane or railway. We will pick you up and go to factory directly

 

Q:My employees are not skilled at operating such machine,can you help to train them?

A: Sure.That is no problem.

Screw Shaft Types and Uses

Various uses for the screw shaft are numerous. Its major diameter is the most significant characteristic, while other aspects include material and function are important. Let us explore these topics in more detail. There are many different types of screw shafts, which include bronze, brass, titanium, and stainless steel. Read on to learn about the most common types. Listed below are some of the most common uses for a screw shaft. These include: C-clamps, screw jacks, vises, and more.
screwshaft

Major diameter of a screw shaft

A screw’s major diameter is measured in fractions of an inch. This measurement is commonly found on the screw label. A screw with a major diameter less than 1/4″ is labeled #0 to #14; those with a larger diameter are labeled fractions of an inch in a corresponding decimal scale. The length of a screw, also known as the shaft, is another measure used for the screw.
The major diameter of a screw shaft is the greater of its 2 outer diameters. When determining the major diameter of a screw, use a caliper, micrometer, or steel rule to make an accurate measurement. Generally, the first number in the thread designation refers to the major diameter. Therefore, if a screw has a thread of 1/2-10 Acme, the major diameter of the thread is.500 inches. The major diameter of the screw shaft will be smaller or larger than the original diameter, so it’s a good idea to measure the section of the screw that’s least used.
Another important measurement is the pitch. This measures the distance between 1 thread’s tip and the next thread’s corresponding point. Pitch is an important measurement because it refers to the distance a screw will advance in 1 turn. While lead and pitch are 2 separate concepts, they are often used interchangeably. As such, it’s important to know how to use them properly. This will make it easier to understand how to select the correct screw.
There are 3 different types of threads. The UTS and ISO metric threads are similar, but their common values for Dmaj and Pmaj are different. A screw’s major diameter is the largest diameter, while the minor diameter is the lowest. A nut’s major diameter, or the minor diameter, is also called the nut’s inside diameter. A bolt’s major diameter and minor diameter are measured with go/no-go gauges or by using an optical comparator.
The British Association and American Society of Mechanical Engineers standardized screw threads in the 1840s. A standard named “British Standard Whitworth” became a common standard for screw threads in the United States through the 1860s. In 1864, William Sellers proposed a new standard that simplified the Whitworth thread and had a 55 degree angle at the tip. Both standards were widely accepted. The major diameter of a screw shaft can vary from 1 manufacturer to another, so it’s important to know what size screw you’re looking for.
In addition to the thread angle, a screw’s major diameter determines the features it has and how it should be used. A screw’s point, or “thread”, is usually spiky and used to drill into an object. A flat tipped screw, on the other hand, is flat and requires a pre-drilled hole for installation. Finally, the diameter of a screw bolt is determined by the major and minor diameters.
screwshaft

Material of a screw shaft

A screw shaft is a piece of machine equipment used to move raw materials. The screw shaft typically comprises a raw material w. For a particular screw to function correctly, the raw material must be sized properly. In general, screw shafts should have an axial-direction length L equal to the moving amount k per 1/2 rotation of the screw. The screw shaft must also have a proper contact angle ph1 in order to prevent raw material from penetrating the screw shaft.
The material used for the shaft depends on its application. A screw with a ball bearing will work better with a steel shaft than 1 made of aluminum. Aluminum screw shafts are the most commonly used for this application. Other materials include titanium. Some manufacturers also prefer stainless steel. However, if you want a screw with a more modern appearance, a titanium shaft is the way to go. In addition to that, screws with a chromium finish have better wear resistance.
The material of a screw shaft is important for a variety of applications. It needs to have high precision threads and ridges to perform its function. Manufacturers often use high-precision CNC machines and lathes to create screw shafts. Different screw shafts can have varying sizes and shapes, and each 1 will have different applications. Listed below are the different materials used for screw shafts. If you’re looking for a high-quality screw shaft, you should shop around.
A lead screw has an inverse relationship between contact surface pressure and sliding velocity. For heavier axial loads, a reduced rotation speed is needed. This curve will vary depending on the material used for the screw shaft and its lubrication conditions. Another important factor is end fixity. The material of a screw shaft can be either fixed or free, so make sure to consider this factor when choosing the material of your screw. The latter can also influence the critical speed and rigidity of the screw.
A screw shaft’s major diameter is the distance between the outer edge of the thread and the inner smooth part. Screw shafts are typically between 2 and 16 millimeters in diameter. They feature a cylindrical shape, a pointy tip, and a wider head and drive than the former. There are 2 basic types of screw heads: threaded and non-threaded. These have different properties and purposes.
Lead screws are a cost-effective alternative to ball screws, and are used for low power and light to medium-duty applications. They offer some advantages, but are not recommended for continuous power transmission. But lead screws are often quieter and smaller, which make them useful for many applications. Besides, they are often used in a kinematic pair with a nut object. They are also used to position objects.
screwshaft

Function of a screw shaft

When choosing a screw for a linear motion system, there are many factors that should be considered, such as the position of the actuator and the screw and nut selection. Other considerations include the overall length of travel, the fastest move profile, the duty cycle, and the repeatability of the system. As a result, screw technology plays a critical role in the overall performance of a system. Here are the key factors to consider when choosing a screw.
Screws are designed with an external threading that digs out material from a surface or object. Not all screw shafts have complete threading, however. These are known as partially threaded screws. Fully threaded screws feature complete external threading on the shaft and a pointed tip. In addition to their use as fasteners, they can be used to secure and tighten many different types of objects and appliances.
Another factor to consider is axial force. The higher the force, the bigger the screw needs to be. Moreover, screws are similar to columns that are subject to both tension and compression loads. During the compression load, bowing or deflection is not desirable, so the integrity of the screw is important. So, consider the design considerations of your screw shaft and choose accordingly. You can also increase the torque by using different shaft sizes.
Shaft collars are also an important consideration. These are used to secure and position components on the shaft. They also act as stroke limiters and to retain sprocket hubs, bearings, and shaft protectors. They are available in several different styles. In addition to single and double split shaft collars, they can be threaded or set screw. To ensure that a screw collar will fit tightly to the shaft, the cap must not be overtightened.
Screws can be cylindrical or conical and vary in length and diameter. They feature a thread that mates with a complementary helix in the material being screwed into. A self-tapping screw will create a complementary helix during driving, creating a complementary helix that allows the screw to work with the material. A screw head is also an essential part of a screw, providing gripping power and compression to the screw.
A screw’s pitch and lead are also important parameters to consider. The pitch of the screw is the distance between the crests of the threads, which increases mechanical advantage. If the pitch is too small, vibrations will occur. If the pitch is too small, the screw may cause excessive wear and tear on the machine and void its intended purpose. The screw will be useless if it can’t be adjusted. And if it can’t fit a shaft with the required diameter, then it isn’t a good choice.
Despite being the most common type, there are various types of screws that differ in their functions. For example, a machine screw has a round head, while a truss head has a lower-profile dome. An oval-its point screw is a good choice for situations where the screw needs to be adjusted frequently. Another type is a soft nylon tip, which looks like a Half-dog point. It is used to grip textured or curved surfaces.

China wholesaler Portable HDD Shredder Hard Drive Shredder Hard Disk Shredder HDD Crusher HDD Recycling Machine with Best SalesChina wholesaler Portable HDD Shredder Hard Drive Shredder Hard Disk Shredder HDD Crusher HDD Recycling Machine with Best Sales

China Hot selling Kraft Waste Duplex Recycling Board Fluting White Top Coated Corrugated Paper Making Machine with Best Sales

Product Description

Buying Xihu (West Lake) Dis.
            In order to recommend proper machine and make detailed technical proposal for you as soon possible ,please tell us the following technical parameters:

(1)what kind of paper do you want to produce?

(2)what kind of raw material you will use?

(3)how many tons do you want to produce per day(24hours)?

(4)what is the output paper width of jumbo roll?–mm;

(5)What is the output paper weight(thickness)?–gsm.

Thanks for your cooperation!

Main Technical parameters:

1.Raw material: waste paper,old carton box ;

2. Output paper:Kraft paper, test liner paper, fluting paper , white top paper ;

3. Capacity :50-500 tons per day ;

4. Net paper width : 2000-6000mm ;

5. Paper grammage :80-400 g/m2 ;

6.Design speed : 500m/min ;

7. Working speed :200-500m/min ;

 

Raw Material

Flow

Finished production

Our  service 
 

 How to get your suitable machine and production lines?

1.inquiry:contact us by email,phone,fax, ,MSN etc.
2.negotiation:after getting our quotation,you confirm the paper machine model and specify the

items you desire.
3.contract:place order and signing the agreement files.

4.production:as soon as we received first payment,we will start to produce machines.we will notify

client to book the ship 15days in advance.
5.delivery: all the machines will be shipped according to contracted items.

6.installation:we will send engineers/technicians to install the whole production line. 

After-sales service

1. Our company view adhering to the “excellent quality, customer satisfaction” service concept,

to provide you with excellent products and perfect service.

2. Our company keep the contract and reputation. Quality first, products guarantee a year, as it is

quality problem, free replacement.

3. For every purchase of our company’s products, the company can send technicians to CZPT the

installation and debugging, and can undertake the design of process and equipment installation.

4. Our company ensure that supply of parts discount all the year around

Factory Production

     HangZhou City HangZhou Paper Machinery Co., Ltd is a professional manufacturer of papermaking equipment.The company is located in Xili industrial district, HangZhou City, ZheJiang province.It was founded in 1990.There are more than 100 employees,covering 1200sq.m.The company’s leading products are 787-6800mm series toilet paper machine,1575-6800mm cylinder paper machine,fourdrinier wire paper machine,superimposed wire paper machine, pulping equipments and further processing equipments.We can also provide paper mill renovation and renewal programs and service.

     A workman must sharpen his tools if he is to do his work well.High quality products need advanced equipment to achieve.Our company now own 4 manufacturing workshops,35 CNC machining equipments,26 professional technicians,20 engineers,which effectively guarantees the accuracy and performance of the products.Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction.

FAQ

You may pay more attention to the follow point

 

1.Why we choose your company, what could you do for me?

We have the stable production experience.

We use the best steel to guarantee the products’ quality

Warranty:we make our machines 1 year warranty.

We will always give you heart to heart service

We always speak with facts and quality

2. How we visit your factory and what will be the procedure?
Our company located in HangZhou city,ZheJiang province, if you take plane, it needs about 2 hours from HangZhou city, 1.5hours from ZheJiang city and 1 hour from ZheJiang .we will pick you up from airport as

well as the train station. We will take you to see our working paper  machine line .Welcome you and your team to visit us at any time!

3. Could your engineer teach and train our worker and stay in our factory for long time?
Yes, we have very large engineer installation team,they can train and teach your worker to operate paper machine,but you should pay them salary.

 4. Which kind of chemical be used in pulp line  

(1) Deinking agent

(2) Dispersing agent

(3) Bleaching agent

 5. How about your company orders?

(1)One set of paper machine line or part is supported by us

Guide to Drive Shafts and U-Joints

If you’re concerned about the performance of your car’s driveshaft, you’re not alone. Many car owners are unaware of the warning signs of a failed driveshaft, but knowing what to look for can help you avoid costly repairs. Here is a brief guide on drive shafts, U-joints and maintenance intervals. Listed below are key points to consider before replacing a vehicle driveshaft.
air-compressor

Symptoms of Driveshaft Failure

Identifying a faulty driveshaft is easy if you’ve ever heard a strange noise from under your car. These sounds are caused by worn U-joints and bearings supporting the drive shaft. When they fail, the drive shafts stop rotating properly, creating a clanking or squeaking sound. When this happens, you may hear noise from the side of the steering wheel or floor.
In addition to noise, a faulty driveshaft can cause your car to swerve in tight corners. It can also lead to suspended bindings that limit overall control. Therefore, you should have these symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms above, your next step should be to tow your vehicle to a mechanic. To avoid extra trouble, make sure you’ve taken precautions by checking your car’s oil level.
In addition to these symptoms, you should also look for any noise from the drive shaft. The first thing to look for is the squeak. This was caused by severe damage to the U-joint attached to the drive shaft. In addition to noise, you should also look for rust on the bearing cap seals. In extreme cases, your car can even shudder when accelerating.
Vibration while driving can be an early warning sign of a driveshaft failure. Vibration can be due to worn bushings, stuck sliding yokes, or even springs or bent yokes. Excessive torque can be caused by a worn center bearing or a damaged U-joint. The vehicle may make unusual noises in the chassis system.
If you notice these signs, it’s time to take your car to a mechanic. You should check regularly, especially heavy vehicles. If you’re not sure what’s causing the noise, check your car’s transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can replace the driveshaft in your car.
air-compressor

Drive shaft type

Driveshafts are used in many different types of vehicles. These include four-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its own purpose. Below is an overview of the 3 most common types of drive shafts:
The driveshaft is a circular, elongated shaft that transmits torque from the engine to the wheels. Drive shafts often contain many joints to compensate for changes in length or angle. Some drive shafts also include connecting shafts and internal constant velocity joints. Some also include torsional dampers, spline joints, and even prismatic joints. The most important thing about the driveshaft is that it plays a vital role in transmitting torque from the engine to the wheels.
The drive shaft needs to be both light and strong to move torque. While steel is the most commonly used material for automotive driveshafts, other materials such as aluminum, composites, and carbon fiber are also commonly used. It all depends on the purpose and size of the vehicle. Precision Manufacturing is a good source for OEM products and OEM driveshafts. So when you’re looking for a new driveshaft, keep these factors in mind when buying.
Cardan joints are another common drive shaft. A universal joint, also known as a U-joint, is a flexible coupling that allows 1 shaft to drive the other at an angle. This type of drive shaft allows power to be transmitted while the angle of the other shaft is constantly changing. While a gimbal is a good option, it’s not a perfect solution for all applications.
CZPT, Inc. has state-of-the-art machinery to service all types of drive shafts, from small cars to race cars. They serve a variety of needs, including racing, industry and agriculture. Whether you need a new drive shaft or a simple adjustment, the staff at CZPT can meet all your needs. You’ll be back on the road soon!

U-joint

If your car yoke or u-joint shows signs of wear, it’s time to replace them. The easiest way to replace them is to follow the steps below. Use a large flathead screwdriver to test. If you feel any movement, the U-joint is faulty. Also, inspect the bearing caps for damage or rust. If you can’t find the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or poorly lubricated, it can quickly fail and cause your car to squeak while driving. Another sign that a joint is about to fail is a sudden, excessive whine. Check your u-joints every year or so to make sure they are in proper working order.
Whether your u-joint is sealed or lubricated will depend on the make and model of your vehicle. When your vehicle is off-road, you need to install lubricable U-joints for durability and longevity. A new driveshaft or derailleur will cost more than a U-joint. Also, if you don’t have a good understanding of how to replace them, you may need to do some transmission work on your vehicle.
When replacing the U-joint on the drive shaft, be sure to choose an OEM replacement whenever possible. While you can easily repair or replace the original head, if the u-joint is not lubricated, you may need to replace it. A damaged gimbal joint can cause problems with your car’s transmission or other critical components. Replacing your car’s U-joint early can ensure its long-term performance.
Another option is to use 2 CV joints on the drive shaft. Using multiple CV joints on the drive shaft helps you in situations where alignment is difficult or operating angles do not match. This type of driveshaft joint is more expensive and complex than a U-joint. The disadvantages of using multiple CV joints are additional length, weight, and reduced operating angle. There are many reasons to use a U-joint on a drive shaft.
air-compressor

maintenance interval

Checking U-joints and slip joints is a critical part of routine maintenance. Most vehicles are equipped with lube fittings on the driveshaft slip joint, which should be checked and lubricated at every oil change. CZPT technicians are well-versed in axles and can easily identify a bad U-joint based on the sound of acceleration or shifting. If not repaired properly, the drive shaft can fall off, requiring expensive repairs.
Oil filters and oil changes are other parts of a vehicle’s mechanical system. To prevent rust, the oil in these parts must be replaced. The same goes for transmission. Your vehicle’s driveshaft should be inspected at least every 60,000 miles. The vehicle’s transmission and clutch should also be checked for wear. Other components that should be checked include PCV valves, oil lines and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is best to have it serviced by CZPT’s East Lexington experts. These services should be performed every 2 to 4 years or every 24,000 miles. For best results, refer to the owner’s manual for recommended maintenance intervals. CZPT technicians are experienced in axles and differentials. Regular maintenance of your drivetrain will keep it in good working order.

China Hot selling Kraft Waste Duplex Recycling Board Fluting White Top Coated Corrugated Paper Making Machine with Best SalesChina Hot selling Kraft Waste Duplex Recycling Board Fluting White Top Coated Corrugated Paper Making Machine with Best Sales

China best 2017 New Design Jumbo Roll Kraft Paper Making Machine for Waste Paper Recycling with Hot selling

Product Description

2017 New Design Jumbo Roll Kraft Paper Making Machine For Waste Paper Recycling

Technical Parameter
 

Output paper Kraft paper , container board paper
Raw material Waste paper, Waste paper carton
Net paper width 1500-1700mm
Gram 80-160g/m2
Center gauge 2400mm
Designed speed 80m/min
Working speed 30-60m/min
Capacity 5-6T/D
Drive AC frequency speed, section drive
Arrange mode left and right hand machine
Density of wire 0.33-0.4%
Paper dryness of wire part 15-18%
Paper dryness of press part 30-38%
Dryness of finish paper 95%

Main Structure

  • Cylinder CZPT part
  • Pressure Part
  • Dryer Part
  • Reel paper part
  • Two roll calender
  • Rewinding paper machine
  • Driving & control part

All The Equipments
 

No. Name Qty
1 1575mmdouble-dryer and three-cylinder CZPT paper machine 1
2 Dryer exhausted hood 1
3 Φ700mm axial flow fan 1
4 Type-15 roots vacuum pump 1
5 1575mm reel machine 1
6 1575mm calender machine 1
7 1575 rewinding machine 1
8 Motor and Frequency convertor 1

Company Information 
 

HangZhou City Shunfu Paper Making Machinery Co., Ltd.

  • Founded in 1988, HangZhou City Shunfu Paper Making Machinery Co., Ltd. is a professional paper machine manufacturer who specialized in manufacturing and exporting paper machine over the past 30 years. 
  • Our products have passed Quality system ISO9001:2000 and exported more than 30 countries, Russia, India, Nigeria, Syria, Pakistan, Egept, Middle East, Africa, and South America etc. Our high quality and perfect service have reserved consumer’s praise and more orders.

What We Have

  • China Leading Paper Making And Processing Technology
  • Super High Quality
  • Competitive Price
  • Best service in overseas
  • Fast Delivery
  • 8 Years’ Export Experience
  • Excellent Sale and After-sale Service
  • OEM Available

Related Products We Offer 

FAQ

1.Why choose Shunfu?                                                                             

  • Founded in 1988, is a mature brand in china with 30 years experience of manufacturing various kinds of paper machine. 
  • our machine is running well in more than 30 countries, can match all the CE standard or more strict standard.
  • We have professional team with rich experience of paper mill design .you only need to tell us your open land dimension, we will make the future paper mill design for you.
  • In time delivery.

2. What is your payment term?                                                    

  • Usually, our payment term is 30% after signing contract, 70% before shipment.
  • We can also accept L/C, Western Union;
  • Payment term can be negotiated.

3. Could your engineer teach and train our worker and stay in our factory for long time?

  • Yes, we have installation engineer team, they can train and teach your worker to operate paper machine, during which their salary is paid by you.

4. Can I visit your company?                                                               

  • Yes, you can. Our company located in HangZhou city of ZheJiang province, if you take plane, it will need about 2 hours from HangZhou city, we will pick you up from airport as well as the train station. We will take you to see our machine running in our chinese clients’ paper mill. welcome you and your team to visit us at any time!

If you want to know more information, please contact me!

 

Drive shaft type

The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are 3 main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.
air-compressor

tube yoke

Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16″ and an overall width of 4½”. U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat’s drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It’s a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.
air-compressor

end yoke

If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join 2 heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or “slips” can be purchased separately. Whether you need a new 1 or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT’s drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don’t want to modify your existing drivetrain, we can even make a custom yoke for you.

China best 2017 New Design Jumbo Roll Kraft Paper Making Machine for Waste Paper Recycling with Hot sellingChina best 2017 New Design Jumbo Roll Kraft Paper Making Machine for Waste Paper Recycling with Hot selling

China Custom Kraft Machine Recycling Machine Production Line Making Brown Kraft Paper Roll with Free Design Custom

Product Description

Top Manufacturer Supply Kraft Corrugated Recycle Paper Making Machine

Technical Parameter
 

Output paper Kraft paper , container board paper
Raw material Waste paper, Waste paper carton
Net paper width 1500-1700mm
Gram 80-160g/m2
Center gauge 2400mm
Designed speed 80m/min
Working speed 30-60m/min
Capacity 5-6T/D
Drive AC frequency speed, section drive
Arrange mode left and right hand machine
Density of wire 0.33-0.4%
Paper dryness of wire part 15-18%
Paper dryness of press part 30-38%
Dryness of finish paper 95%

Main Structure

  • Cylinder CZPT part
  • Pressure Part
  • Dryer Part
  • Reel paper part
  • Two roll calender
  • Rewinding paper machine
  • Driving & control part

All The Equipments
 

No. Name Qty
1 1575mmdouble-dryer and three-cylinder CZPT paper machine 1
2 Dryer exhausted hood 1
3 Φ700mm axial flow fan 1
4 Type-15 roots vacuum pump 1
5 1575mm reel machine 1
6 1575mm calender machine 1
7 1575 rewinding machine 1
8 Motor and Frequency convertor 1

Company Information 
 

HangZhou City Shunfu Paper Making Machinery Co., Ltd.

  • Founded in 1988, HangZhou City Shunfu Paper Making Machinery Co., Ltd. is a professional paper machine manufacturer who specialized in manufacturing and exporting paper machine over the past 30 years. 
  • Our products have passed Quality system ISO9001:2000 and exported more than 30 countries, Russia, India, Nigeria, Syria, Pakistan, Egept, Middle East, Africa, and South America etc. Our high quality and perfect service have reserved consumer’s praise and more orders.

What We Have

  • China Leading Paper Making And Processing Technology
  • Super High Quality
  • Competitive Price
  • Best service in overseas
  • Fast Delivery
  • 8 Years’ Export Experience
  • Excellent Sale and After-sale Service
  • OEM Available

Related Products We Offer 

FAQ

1.Why choose Shunfu?                                                                             

  • Founded in 1988, is a mature brand in china with 30 years experience of manufacturing various kinds of paper machine. 
  • our machine is running well in more than 30 countries, can match all the CE standard or more strict standard.
  • We have professional team with rich experience of paper mill design .you only need to tell us your open land dimension, we will make the future paper mill design for you.
  • In time delivery.

2. What is your payment term?                                                    

  • Usually, our payment term is 30% after signing contract, 70% before shipment.
  • We can also accept L/C, Western Union;
  • Payment term can be negotiated.

3. Could your engineer teach and train our worker and stay in our factory for long time?

  • Yes, we have installation engineer team, they can train and teach your worker to operate paper machine, during which their salary is paid by you.

4. Can I visit your company?                                                               

  • Yes, you can. Our company located in HangZhou city of ZheJiang province, if you take plane, it will need about 2 hours from HangZhou city, we will pick you up from airport as well as the train station. We will take you to see our machine running in our chinese clients’ paper mill. welcome you and your team to visit us at any time!

If you want to know more information, please contact me!

 

How to Identify a Faulty Drive Shaft

The most common problems associated with automotive driveshafts include clicking and rubbing noises. While driving, the noise from the driver’s seat is often noticeable. An experienced auto mechanic can easily identify whether the sound is coming from both sides or from 1 side. If you notice any of these signs, it’s time to send your car in for a proper diagnosis. Here’s a guide to determining if your car’s driveshaft is faulty:
air-compressor

Symptoms of Driveshaft Failure

If you’re having trouble turning your car, it’s time to check your vehicle’s driveshaft. A bad driveshaft can limit the overall control of your car, and you should fix it as soon as possible to avoid further problems. Other symptoms of a propshaft failure include strange noises from under the vehicle and difficulty shifting gears. Squeaking from under the vehicle is another sign of a faulty driveshaft.
If your driveshaft fails, your car will stop. Although the engine will still run, the wheels will not turn. You may hear strange noises from under the vehicle, but this is a rare symptom of a propshaft failure. However, you will have plenty of time to fix the problem. If you don’t hear any noise, the problem is not affecting your vehicle’s ability to move.
The most obvious signs of a driveshaft failure are dull sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is likely to damage the transmission. It will require a trailer to remove it from your vehicle. Apart from that, it can also affect your car’s performance and require repairs. So if you hear these signs in your car, be sure to have it checked by a mechanic right away.

Drive shaft assembly

When designing a propshaft, the design should be based on the torque required to drive the vehicle. When this torque is too high, it can cause irreversible failure of the drive shaft. Therefore, a good drive shaft design should have a long service life. Here are some tips to help you design a good driveshaft. Some of the main components of the driveshaft are listed below.
Snap Ring: The snap ring is a removable part that secures the bearing cup assembly in the yoke cross hole. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined element with a series of ridges that fit into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required due to the angular displacement between the T-shaped housing and the pinion. This angle is especially large in raised 4x4s. The design of the U-joint must guarantee a constant rotational speed. Proper driveshaft design must account for the difference in angular velocity between the shafts. The T-bracket and output shaft are attached to the bearing caps at both ends.
air-compressor

U-joint

Your vehicle has a set of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it yourself. You will need a hammer, ratchet and socket. In order to remove the U-joint, you must first remove the bearing cup. In some cases you will need to use a hammer to remove the bearing cup, you should be careful as you don’t want to damage the drive shaft. If you cannot remove the bearing cup, you can also use a vise to press it out.
There are 2 types of U-joints. One is held by a yoke and the other is held by a c-clamp. A full ring is safer and ideal for vehicles that are often used off-road. In some cases, a full circle can be used to repair a c-clamp u-joint.
In addition to excessive torque, extreme loads and improper lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be damaged if the engine is modified. If you are driving a vehicle with a heavily modified engine, it is not enough to replace the OE U-joint. In this case, it is important to take the time to properly lubricate these components as needed to keep them functional.

tube yoke

QU40866 Tube Yoke is a common replacement for damaged or damaged driveshaft tubes. They are desirably made of a metallic material, such as an aluminum alloy, and include a hollow portion with a lug structure at 1 end. Tube yokes can be manufactured using a variety of methods, including casting and forging. A common method involves drawing solid elements and machining them into the final shape. The resulting components are less expensive to produce, especially when compared to other forms.
The tube fork has a connection point to the driveshaft tube. The lug structure provides attachment points for the gimbal. Typically, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug structure also serves as a mounting point for the drive shaft. Once installed, Tube Yoke is easy to maintain. There are 2 types of lug structures: 1 is forged tube yoke and the other is welded.
Heavy-duty series drive shafts use bearing plates to secure the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are usually machined to accept U-bolts. For some applications, grease fittings are used. This attachment is more suitable for off-road vehicles and performance vehicles.
air-compressor

end yoke

The end yoke of the drive shaft is an integral part of the drive train. Choosing a high-quality end yoke will help ensure long-term operation and prevent premature failure. Pat’s Driveline offers a complete line of automotive end yokes for power take-offs, differentials and auxiliary equipment. They can also measure your existing parts and provide you with high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it provides greater stability in unstable terrain. You can purchase a U-bolt kit to secure the pinion carrier to the drive shaft. U-bolts also come with lock washers and nuts. Performance cars and off-road vehicles often use this type of attachment. But before you install it, you have to make sure the yoke is machined to accept it.
End yokes can be made of aluminum or steel and are designed to provide strength. It also offers special bolt styles for various applications. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The company also produces custom flanged yokes for many popular brands. Since the company has a comprehensive line of replacement flange yokes, it can help you transform your drivetrain from non-serviceable to serviceable.

bushing

The first step in repairing or replacing an automotive driveshaft is to replace worn or damaged bushings. These bushings are located inside the drive shaft to provide a smooth, safe ride. The shaft rotates in a rubber sleeve. If a bushing needs to be replaced, you should first check the manual for recommendations. Some of these components may also need to be replaced, such as the clutch or swingarm.

China Custom Kraft Machine Recycling Machine Production Line Making Brown Kraft Paper Roll with Free Design CustomChina Custom Kraft Machine Recycling Machine Production Line Making Brown Kraft Paper Roll with Free Design Custom