Tag Archives: motor power electric

China Standard New Energy Vehicle High Speed Electric Power Engine Motor Aion Y 2WD 4X2 Drive Mode Compact SUV for Hot Sale with Best Sales

Product Description

ZBT ELECTRIC CAR AION Y NEDC 410km 500km 600km Long Range 4×2 2WD EV SUV for sales:

We also have other color or other brand electric car.
Main parameters:

Vehicle Model AION Y Battery Lithium Iron Phosphate
Driver Form 4×2 2WD FWD Gearbox Single-Stage Gear Reducer
Max Output 95 hp / 70 kw Motor Type Permanent Magnet Synchronous
Max Torque 225 N.m Transmission AT
Battery Capacity 55.5 kwh Steering LHD (Left hand drive)
NEDC Range 410 km Dimension 4410x1870x1645 (mm)
Fast Charge 0.8 h Wheelbase 2750 mm
Slow Charge 8 h Max Speed 150 km/h
Power Consumption 13.8 kw.h/100 km  0~100km Acceleration 7.9 s
Crub Weight  1710 kg Trunk compartment 500~1600 L
Gross Vehicle Weight 2110 kg Tire 215/55 R17

Detailed Photos

 

Company Profile

Certifications

FAQ

Q: How can you go to our yard?

A:We will pick you up at airport or train station or hotel.

 

Q:Is there any MOQ requirement?
A:No MOQ requirement, and we are even CZPT to provide the Express service if parts are urgently needed.

 

Q:How can we make a deal done?

A:The procedure mainly goes like this as the following steps:

On-scene cheking machines→paying deposit if satisfied→booking cargo space→loading→closing remaining mortage→getting the B/L.

 

Q:How about Shipment? sometimes we are not ordering big quantity enough to fit in 1 full container.

A:In assisting customer to save sea freight cost, Flexible logistic solutions are provided

P:We can go LCL when the spare parts are not in big quantity enough to be needful of 20ft container.

P:We can deliver our spare parts to any port or any place in china customer designated in case customer would like to combine all the goods to be shipped in 1 full container.

P:We can also arrange the whole container of spare parts shipment.

P:We can also arrange express service if parts are urgently needed

 

Q:What is your advantage?

A:We are the largest professional used constraction machinery company in China.We have sufficient source of goods and guaranteed quality.We are CZPT to provide our clients with good conditon truck at special price.

 

Q:Do we provide after-sales service?

A:Yes, we provide.

 

Q: How can u get after-sales service?

A:We can send our technicians to your country or we can contact in the internet about the problem of machine, then our technicians will tell u or your technician how to solve the problem.

 

Q:How can u find a good and cheap hotel?

A:We will book a nice hotel which near the yard for u before u arrive.

Lead Screws and Clamp Style Collars

If you have a lead screw, you’re probably interested in learning about the Acme thread on this type of shaft. You might also be interested in finding out about the Clamp style collars and Ball screw nut. But before you buy a new screw, make sure you understand what the terminology means. Here are some examples of screw shafts:

Acme thread

The standard ACME thread on a screw shaft is made of a metal that is resistant to corrosion and wear. It is used in a variety of applications. An Acme thread is available in a variety of sizes and styles. General purpose Acme threads are not designed to handle external radial loads and are supported by a shaft bearing and linear guide. Their design is intended to minimize the risk of flank wedging, which can cause friction forces and wear. The Centralizing Acme thread standard caters to applications without radial support and allows the thread to come into contact before its flanks are exposed to radial loads.
The ACME thread was first developed in 1894 for machine tools. While the acme lead screw is still the most popular screw in the US, European machines use the Trapezoidal Thread (Metric Acme). The acme thread is a stronger and more resilient alternative to square threads. It is also easier to cut than square threads and can be cut by using a single-point threading die.
Similarly to the internal threads, the metric versions of Acme are similar to their American counterparts. The only difference is that the metric threads are generally wider and are used more frequently in industrial settings. However, the metric-based screw threads are more common than their American counterparts worldwide. In addition, the Acme thread on screw shafts is used most often on external gears. But there is still a small minority of screw shafts that are made with a metric thread.
ACME screws provide a variety of advantages to users, including self-lubrication and reduced wear and tear. They are also ideal for vertical applications, where a reduced frictional force is required. In addition, ACME screws are highly resistant to back-drive and minimize the risk of backlash. Furthermore, they can be easily checked with readily available thread gauges. So, if you’re looking for a quality ACME screw for your next industrial project, look no further than ACME.
screwshaft

Lead screw coatings

The properties of lead screw materials affect their efficiency. These materials have high anti-corrosion, thermal resistance, and self-lubrication properties, which eliminates the need for lubrication. These coating materials include polytetrafluoroethylene (PFE), polyether ether ketone (PEK), and Vespel. Other desirable properties include high tensile strength, corrosion resistance, and rigidity.
The most common materials for lead screws are carbon steel, stainless steel, and aluminum. Lead screw coatings can be PTFE-based to withstand harsh environments and remove oil and grease. In addition to preventing corrosion, lead screw coatings improve the life of polymer parts. Lead screw assembly manufacturers offer a variety of customization options for their lead screw, including custom-molded nuts, thread forms, and nut bodies.
Lead screws are typically measured in rpm, or revolutions per minute. The PV curve represents the inverse relationship between contact surface pressure and sliding velocity. This value is affected by the material used in the construction of the screw, lubrication conditions, and end fixity. The critical speed of lead screws is determined by their length and minor diameter. End fixity refers to the support for the screw and affects its rigidity and critical speed.
The primary purpose of lead screws is to enable smooth movement. To achieve this, lead screws are usually preloaded with axial load, enabling consistent contact between a screw’s filets and nuts. Lead screws are often used in linear motion control systems and feature a large area of sliding contact between male and female threads. Lead screws can be manually operated or mortised and are available in a variety of sizes and materials. The materials used for lead screws include stainless steel and bronze, which are often protected by a PTFE type coating.
These screws are made of various materials, including stainless steel, bronze, and various plastics. They are also made to meet specific requirements for environmental conditions. In addition to lead screws, they can be made of stainless steel, aluminum, and carbon steel. Surface coatings can improve the screw’s corrosion resistance, while making it more wear resistant in tough environments. A screw that is coated with PTFE will maintain its anti-corrosion properties even in tough environments.
screwshaft

Clamp style collars

The screw shaft clamp style collar is a basic machine component, which is attached to the shaft via multiple screws. These collars act as mechanical stops, load bearing faces, or load transfer points. Their simple design makes them easy to install. This article will discuss the pros and cons of this style of collar. Let’s look at what you need to know before choosing a screw shaft clamp style collar. Here are some things to keep in mind.
Clamp-style shaft collars are a versatile mounting option for shafts. They have a recessed screw that fully engages the thread for secure locking. Screw shaft clamp collars come in different styles and can be used in both drive and power transmission applications. Listed below are the main differences between these 2 styles of collars. They are compatible with all types of shafts and are able to handle axial loads of up to 5500 pounds.
Clamp-style shaft collars are designed to prevent the screw from accidentally damaging the shaft when tightened. They can be tightened with a set screw to counteract the initial clamping force and prevent the shaft from coming loose. However, when tightening the screw, you should use a torque wrench. Using a set screw to tighten a screw shaft collar can cause it to warp and reduce the surface area that contacts the shaft.
Another key advantage to Clamp-style shaft collars is that they are easy to install. Clamp-style collars are available in one-piece and two-piece designs. These collars lock around the shaft and are easy to remove and install. They are ideal for virtually any shaft and can be installed without removing any components. This type of collar is also recommended for those who work on machines with sensitive components. However, be aware that the higher the OD, the more difficult it is to install and remove the collar.
Screw shaft clamp style collars are usually one-piece. A two-piece collar is easier to install than a one-piece one. The two-piece collars provide a more effective clamping force, as they use the full seating torque. Two-piece collars have the added benefit of being easy to install because they require no tools to install. You can disassemble one-piece collars before installing a two-piece collar.
screwshaft

Ball screw nut

The proper installation of a ball screw nut requires that the nut be installed on the center of the screw shaft. The return tubes of the ball nut must be oriented upward so that the ball nut will not overtravel. The adjusting nut must be tightened against a spacer or spring washer, then the nut is placed on the screw shaft. The nut should be rotated several times in both directions to ensure that it is centered.
Ball screw nuts are typically manufactured with a wide range of preloads. Large preloads are used to increase the rigidity of a ball screw assembly and prevent backlash, the lost motion caused by a clearance between the ball and nut. Using a large amount of preload can lead to excessive heat generation. The most common preload for ball screw nuts is 1 to 3%. This is usually more than enough to prevent backlash, but a higher preload will increase torque requirements.
The diameter of a ball screw is measured from its center, called the ball circle diameter. This diameter represents the distance a ball will travel during 1 rotation of the screw shaft. A smaller diameter means that there are fewer balls to carry the load. Larger leads mean longer travels per revolution and higher speeds. However, this type of screw cannot carry a greater load capacity. Increasing the length of the ball nut is not practical, due to manufacturing constraints.
The most important component of a ball screw is a ball bearing. This prevents excessive friction between the ball and the nut, which is common in lead-screw and nut combinations. Some ball screws feature preloaded balls, which avoid “wiggle” between the nut and the ball. This is particularly desirable in applications with rapidly changing loads. When this is not possible, the ball screw will experience significant backlash.
A ball screw nut can be either single or multiple circuits. Single or multiple-circuit ball nuts can be configured with 1 or 2 independent closed paths. Multi-circuit ball nuts have 2 or more circuits, making them more suitable for heavier loads. Depending on the application, a ball screw nut can be used for small clearance assemblies and compact sizes. In some cases, end caps and deflectors may be used to feed the balls back to their original position.

China Standard New Energy Vehicle High Speed Electric Power Engine Motor Aion Y 2WD 4X2 Drive Mode Compact SUV for Hot Sale   with Best SalesChina Standard New Energy Vehicle High Speed Electric Power Engine Motor Aion Y 2WD 4X2 Drive Mode Compact SUV for Hot Sale   with Best Sales

China best Electric Wheelchair Lightweight Wheelchair, 250W Dual Motor Dual-Function, Fast-Fold Compact Electric Chair Drive with Power or Manual Wheelchair wholesaler

Product Description

FDA and CE approved premium lightweight power electric wheelchair

D20 folding power electric wheelchair Key Features:

1. 5-seconds folding or unfolding, easy to carry as a luggage on plane or on train.
2. Very light weight, only 18kg.
3.Small volume after folding.
4. Frame material: magnesium alloy.
5. Certificates: CE;FDA;ISO9001; ISO13485.
6. High efficiency brushless hub motor

7.The warranty period of frame is 3 years; Motors, controller, Battery are 1 years.
 

D20 lightweight folding electric power wheelchair parameters:

Description:  Portable folding premium electric wheelchair
Model D20
Material Aluminum alloy
unfold size 955*670*920mm
fold size 670*355*760mm 
loading capacity 120kgs 
Motor 250W*2pcs brushless motors
Battery 24V 6AH*1 pcs lithium battery  
max speed 6km/hour
Driving range 25KM
front tires 7″*2pcs PU solid tires
rear tires 8″*2pcs PU solid tires
climbing slope max 8°
charging time 4 hours
width of armrest 510mm
seat width 420mm
chair depth 620mm
chair height 875mm
   
net weight without battery 15kg
net weight with 1 batteries 18kg
Drive model  rear drive
braking system electromanetic brake
Factory Colour silver,black
Package carton size 540*430*800mm

Package: 1 set D20 folding electric power wheelchairs / carton with protected foams.

Certificates:SGS, CE, FDA, ISO13485.
Company information:
JBH Wheelchair/Scooters is researching and development, manufacturing and sales enterprise. Specialized in Portable power wheelchair, Portable electric scooter, knee walker, and electric standing wheelchair. Products passed through ISO 13485, FDA and CE standard. We provide OEM service, great quality. “JBH” as the registered trademark renowned for “Safe, Light and Portable” on the market. Products covers 20 Provinces in China and export to USA, UK, Canada, and Australia. CZPT wheelchair gained wide range recognition and trust from our customers. We will continue providing high quality products and service.

Folding electric power wheelchair FAQ

Q1: Why Choose CZPT Products?
 We are 1 of the professional wheelchair factory here in China,
 Best production capability, Best quality control, Best Service,

 Q2: How is CZPT Products Quality?
 We only supply quality products, our manufacturing facilities have received the ISO, CE, recognition, and get FDA certificate for some products . 
Every products will inspected to the standard before shipment, and every product has 1 year warranty period.

Q3:What is your MOQ(Minimum Order Quantity ? 
  As a factory, our MOQ is 1 piece, it could be mixed the different models.

Q4: Payment and shipment
 We accept: T/T,Paypal, West Union.
 Delivery time: According the order.

Q5: Is the wheelchair foldable and portable?
Yes. Our wheelchair can be easily disassembled and placed in the trunk of a vehicle.
 
Q6: Is the wheelchair for indoor or outdoor use?
It was designed for both indoor and outdoor use.

Q7: Will you accept OEM orders?
Yes. We’d like to produce our customers’ OEM/ODM orders.

Q8:Are you trading company or manufacturer?
We are professional manufacturer and have several years of wheelchairs experience in global market.

Q9,:What is the warranty period of the wheelchair?
The warranty period of frame is 3 years. Motors, controller is 1 year. Battery is 6 months.

 

 

Drive shaft type

The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are 3 main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.
air-compressor

tube yoke

Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16″ and an overall width of 4½”. U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat’s drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It’s a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.
air-compressor

end yoke

If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join 2 heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or “slips” can be purchased separately. Whether you need a new 1 or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT’s drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don’t want to modify your existing drivetrain, we can even make a custom yoke for you.

China best Electric Wheelchair Lightweight Wheelchair, 250W Dual Motor Dual-Function, Fast-Fold Compact Electric Chair Drive with Power or Manual Wheelchair     wholesaler China best Electric Wheelchair Lightweight Wheelchair, 250W Dual Motor Dual-Function, Fast-Fold Compact Electric Chair Drive with Power or Manual Wheelchair     wholesaler