Tag Archives: e motor

China Standard New Arrival Fatbike 20″ X4.0 Rear Drive Motor Mountain E Bike 48V 500W/1000W Electric Fat Tire Bike with Great quality

Product Description

Product Description

Features

1.500W integrated wheel motor (marked as 250W)with water proof connector

2.Disc brake for both

3.48V 13AH Lithium Battery(Sumsung cells)
4.K-Meter LCD display
5.LED light for front

6.Front fork: MOZO hydraulic suspension fork with lock

7.7 speed CZPT gear shift

 

 

Frame

Aluminum alloy frame

Motor

500W 

Battery

48V 13AH Lithium battery

Display

LCD display

Light

LED light for front 

Tire

20”×4.0 Kenda Tire

 Brake

Disc brake for both

Front Fork

Aluminum alloy with hydraulic suspension

Derailleurs

7 speed CZPT gear shift

Max speed

25km/h-32km/h

Driving distance

Approx 45-70km

Loading capacity

150KGS

G.W

40KGS

Packing size

160×27×85cm

Container loads

80pcs/20’GP; 165pcs/40’HQ

1.K-Meter LCD display 

speed indocator, battery indicator, HangZhouage indicator.

Aluminum alloy handle bar

2.Make a safe cycling

LED light with higher brightness ,energy conservation and environment protection, low consumption

3.BMS system keep your battery safe from over-charging,over outlet and high temperature.And the battery is convinent to removable.
1. Warranty policy
 
a.)     For main electronic parts, charger, controller and battery, we provide 6 months warranty.
b.)     For motor, we provide 12 months warranty.
c.)     For frame, handlebar, stem and wheel rim we provide 2 years warranty.
 
 1.1 The following conditions, not including in warranty policy
a.)     Any damages caused by human factor.
b.)     Dismounting any parts without professional technical people.
c.)     Use other parts in our electric bike or scooter.
d.)     Damages caused by traffic accident and other accident.
e.)     The problem caused by overloading.
 
 2. Technical support
 
a.)     We provide “electric circuit diagram” for each model.
b.)     We can train customer’s 1 or 2 technical workers for free.
c.)     When oversea customers meet serious problem, they can not work out by technican, we will dispatch engineer to customer’s company to give help.
 
FAQ
 
 1.  Can I order sample?
 Answer: Yes, we accept sample for trial order?
 
2.  How long for delivery time?
 Answer: For sample order, our delivery time is 20 to 30days; for 1 full container, it’s 25 to 45days.
 
3.  Which colores will be available?
 Answer: Normally, we will introduce the most popular colores to customers. At the same time, we are CZPT to make colores according to customer’s demands.
 
4.  Can I use my logo(sticker) on the electric bike?
 Answer: Yes, we can make customer’s logo(sticker) on the electric bike for 1 full container order.
 
5.  How to delivery to foreign buyer?
 Answer: For sample order, the customer can select by sea or by air.  For full container order, by sea is the  best choice.
 
6.  Need I assemble parts of the electric bike when we get them?
 Answer: Yes, we will take out few parts, like pedals(if have), mirrors(if have), front wheel, front fender, and  rear trunk(if have) before package. Our workers will put these parts in electric bike cartons. And will send 1 professional tool bag to help you assemble. It’s easy to make it.
 
7. Can I mix different models in 1 full container order?
 Answer: Yes, we accept different models in 1 full container.
 
8.  Need I buy spare parts for first order?
 Answer: Yes, you need to buy some spare parts for future service. The quantity depends on your electric  bike order. We will give you advice when you need.
 

Our service
1. OEM Manufacturing welcome: Product, Package…
2. Sample order
3. We will reply you for your inquiry in 24 hours.
4. After sending, we will track the products for you once every 2 days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.

Certifications

Company Profile

Packaging & Shipping

FAQ

Lead Screws and Clamp Style Collars

If you have a lead screw, you’re probably interested in learning about the Acme thread on this type of shaft. You might also be interested in finding out about the Clamp style collars and Ball screw nut. But before you buy a new screw, make sure you understand what the terminology means. Here are some examples of screw shafts:

Acme thread

The standard ACME thread on a screw shaft is made of a metal that is resistant to corrosion and wear. It is used in a variety of applications. An Acme thread is available in a variety of sizes and styles. General purpose Acme threads are not designed to handle external radial loads and are supported by a shaft bearing and linear guide. Their design is intended to minimize the risk of flank wedging, which can cause friction forces and wear. The Centralizing Acme thread standard caters to applications without radial support and allows the thread to come into contact before its flanks are exposed to radial loads.
The ACME thread was first developed in 1894 for machine tools. While the acme lead screw is still the most popular screw in the US, European machines use the Trapezoidal Thread (Metric Acme). The acme thread is a stronger and more resilient alternative to square threads. It is also easier to cut than square threads and can be cut by using a single-point threading die.
Similarly to the internal threads, the metric versions of Acme are similar to their American counterparts. The only difference is that the metric threads are generally wider and are used more frequently in industrial settings. However, the metric-based screw threads are more common than their American counterparts worldwide. In addition, the Acme thread on screw shafts is used most often on external gears. But there is still a small minority of screw shafts that are made with a metric thread.
ACME screws provide a variety of advantages to users, including self-lubrication and reduced wear and tear. They are also ideal for vertical applications, where a reduced frictional force is required. In addition, ACME screws are highly resistant to back-drive and minimize the risk of backlash. Furthermore, they can be easily checked with readily available thread gauges. So, if you’re looking for a quality ACME screw for your next industrial project, look no further than ACME.
screwshaft

Lead screw coatings

The properties of lead screw materials affect their efficiency. These materials have high anti-corrosion, thermal resistance, and self-lubrication properties, which eliminates the need for lubrication. These coating materials include polytetrafluoroethylene (PFE), polyether ether ketone (PEK), and Vespel. Other desirable properties include high tensile strength, corrosion resistance, and rigidity.
The most common materials for lead screws are carbon steel, stainless steel, and aluminum. Lead screw coatings can be PTFE-based to withstand harsh environments and remove oil and grease. In addition to preventing corrosion, lead screw coatings improve the life of polymer parts. Lead screw assembly manufacturers offer a variety of customization options for their lead screw, including custom-molded nuts, thread forms, and nut bodies.
Lead screws are typically measured in rpm, or revolutions per minute. The PV curve represents the inverse relationship between contact surface pressure and sliding velocity. This value is affected by the material used in the construction of the screw, lubrication conditions, and end fixity. The critical speed of lead screws is determined by their length and minor diameter. End fixity refers to the support for the screw and affects its rigidity and critical speed.
The primary purpose of lead screws is to enable smooth movement. To achieve this, lead screws are usually preloaded with axial load, enabling consistent contact between a screw’s filets and nuts. Lead screws are often used in linear motion control systems and feature a large area of sliding contact between male and female threads. Lead screws can be manually operated or mortised and are available in a variety of sizes and materials. The materials used for lead screws include stainless steel and bronze, which are often protected by a PTFE type coating.
These screws are made of various materials, including stainless steel, bronze, and various plastics. They are also made to meet specific requirements for environmental conditions. In addition to lead screws, they can be made of stainless steel, aluminum, and carbon steel. Surface coatings can improve the screw’s corrosion resistance, while making it more wear resistant in tough environments. A screw that is coated with PTFE will maintain its anti-corrosion properties even in tough environments.
screwshaft

Clamp style collars

The screw shaft clamp style collar is a basic machine component, which is attached to the shaft via multiple screws. These collars act as mechanical stops, load bearing faces, or load transfer points. Their simple design makes them easy to install. This article will discuss the pros and cons of this style of collar. Let’s look at what you need to know before choosing a screw shaft clamp style collar. Here are some things to keep in mind.
Clamp-style shaft collars are a versatile mounting option for shafts. They have a recessed screw that fully engages the thread for secure locking. Screw shaft clamp collars come in different styles and can be used in both drive and power transmission applications. Listed below are the main differences between these 2 styles of collars. They are compatible with all types of shafts and are able to handle axial loads of up to 5500 pounds.
Clamp-style shaft collars are designed to prevent the screw from accidentally damaging the shaft when tightened. They can be tightened with a set screw to counteract the initial clamping force and prevent the shaft from coming loose. However, when tightening the screw, you should use a torque wrench. Using a set screw to tighten a screw shaft collar can cause it to warp and reduce the surface area that contacts the shaft.
Another key advantage to Clamp-style shaft collars is that they are easy to install. Clamp-style collars are available in one-piece and two-piece designs. These collars lock around the shaft and are easy to remove and install. They are ideal for virtually any shaft and can be installed without removing any components. This type of collar is also recommended for those who work on machines with sensitive components. However, be aware that the higher the OD, the more difficult it is to install and remove the collar.
Screw shaft clamp style collars are usually one-piece. A two-piece collar is easier to install than a one-piece one. The two-piece collars provide a more effective clamping force, as they use the full seating torque. Two-piece collars have the added benefit of being easy to install because they require no tools to install. You can disassemble one-piece collars before installing a two-piece collar.
screwshaft

Ball screw nut

The proper installation of a ball screw nut requires that the nut be installed on the center of the screw shaft. The return tubes of the ball nut must be oriented upward so that the ball nut will not overtravel. The adjusting nut must be tightened against a spacer or spring washer, then the nut is placed on the screw shaft. The nut should be rotated several times in both directions to ensure that it is centered.
Ball screw nuts are typically manufactured with a wide range of preloads. Large preloads are used to increase the rigidity of a ball screw assembly and prevent backlash, the lost motion caused by a clearance between the ball and nut. Using a large amount of preload can lead to excessive heat generation. The most common preload for ball screw nuts is 1 to 3%. This is usually more than enough to prevent backlash, but a higher preload will increase torque requirements.
The diameter of a ball screw is measured from its center, called the ball circle diameter. This diameter represents the distance a ball will travel during 1 rotation of the screw shaft. A smaller diameter means that there are fewer balls to carry the load. Larger leads mean longer travels per revolution and higher speeds. However, this type of screw cannot carry a greater load capacity. Increasing the length of the ball nut is not practical, due to manufacturing constraints.
The most important component of a ball screw is a ball bearing. This prevents excessive friction between the ball and the nut, which is common in lead-screw and nut combinations. Some ball screws feature preloaded balls, which avoid “wiggle” between the nut and the ball. This is particularly desirable in applications with rapidly changing loads. When this is not possible, the ball screw will experience significant backlash.
A ball screw nut can be either single or multiple circuits. Single or multiple-circuit ball nuts can be configured with 1 or 2 independent closed paths. Multi-circuit ball nuts have 2 or more circuits, making them more suitable for heavier loads. Depending on the application, a ball screw nut can be used for small clearance assemblies and compact sizes. In some cases, end caps and deflectors may be used to feed the balls back to their original position.

China Standard New Arrival Fatbike 20China Standard New Arrival Fatbike 20

China Standard Factory Supply Integrate Frame 28 Inch E Bike CZPT Rear Drive Motor City Road Ebike Electric Electrical Electronic Rickshaw Dirt Ebikes wholesaler

Product Description

Product Description

Electric System
Motor 250w – 750w rear drive hub motor
Battery  Samsung, 8.8Ah – 17.5Ah lithium battery
Controller 14-18A Integrated  controller
Display LED / LCD display
Charger 110-240v AC 50-60HZ, 2A  CE / UL Applied
PAS Speed / Torque sensor
Throttle Thumb / twist throttle

Main Components
Frame 6161 Aluminum Alloy, 20-29 inch
Front Fork Aluminum alloy suspension fork, adjustable with lock.
Rims Double wall, aluminum alloy, 36H*13G
Tires HangZhou / CZPT / Kenda tire
Brake Front&Rear disc brake
Speed Gears Shimano 7 speed
Light Front LED light with horn
Rear Derailleur Shimano 7 speed
Saddle Comfortable Saddle
Pedal Foldable pedal
Stem Aluminum alloy
Brake Levers HangZhoung brake levels, with cut-off function
Crankset Aluminum, 42T – 52T
Fenders Full covered,Alloy / steel / plastic fenders
Rear Rack Rear alloy carrier optional

Performance
Max Speed 42-45km/h
Travel Distance 30km by Throttle, 40-60km by PAS
Loading Capacity 120kg
Charging Time & Life 4-6 Hours, >900 Cycles
N.W./G.W. 28KG/32KG
Carton size 160X26X80CM
Container Loading 80pcs/20ft;  190pcs/40HQ                            

Features

1.500W hub motor(Marked as 250w) with water proof connector

2.Disc brake for both
3.48V 13A Lithium Battery(Samsung cells)
4.LCD display
5.LED Light for Front&Rear battery light
6.PAS& Throttle

 

 

 

 

 

Soft and comfortable saddle
Rear carrier max loading is 150kgs

LED front light with higher brightness

Make a safer cycling
Hidden battery more convenient to charging

1. Warranty policy
 
a.)     For main electronic parts, charger, controller and battery, we provide 6 months warranty.
b.)     For motor, we provide 12 months warranty.
c.)     For frame, handlebar, stem and wheel rim we provide 2 years warranty.
 
 1.1 The following conditions, not including in warranty policy
a.)     Any damages caused by human factor.
b.)     Dismounting any parts without professional technical people.
c.)     Use other parts in our electric bike or scooter.
d.)     Damages caused by traffic accident and other accident.
e.)     The problem caused by overloading.
 
 2. Technical support
 
a.)     We provide “electric circuit diagram” for each model.
b.)     We can train customer’s 1 or 2 technical workers for free.
c.)     When oversea customers meet serious problem, they can not work out by technican, we will dispatch engineer to customer’s company to give help.
 
FAQ
 
 1.  Can I order sample?
 Answer: Yes, we accept sample for trial order?
 
2.  How long for delivery time?
 Answer: For sample order, our delivery time is 20 to 30days; for 1 full container, it’s 25 to 45days.
 
3.  Which colores will be available?
 Answer: Normally, we will introduce the most popular colores to customers. At the same time, we are CZPT to make colores according to customer’s demands.
 
4.  Can I use my logo(sticker) on the electric bike?
 Answer: Yes, we can make customer’s logo(sticker) on the electric bike for 1 full container order.
 
5.  How to delivery to foreign buyer?
 Answer: For sample order, the customer can select by sea or by air.  For full container order, by sea is the  best choice.
 
6.  Need I assemble parts of the electric bike when we get them?
 Answer: Yes, we will take out few parts, like pedals(if have), mirrors(if have), front wheel, front fender, and  rear trunk(if have) before package. Our workers will put these parts in electric bike cartons. And will send 1 professional tool bag to help you assemble. It’s easy to make it.
 
7. Can I mix different models in 1 full container order?
 Answer: Yes, we accept different models in 1 full container.
 
8.  Need I buy spare parts for first order?
 Answer: Yes, you need to buy some spare parts for future service. The quantity depends on your electric  bike order. We will give you advice when you need.
 

Our service
1. OEM Manufacturing welcome: Product, Package…
2. Sample order
3. We will reply you for your inquiry in 24 hours.
4. After sending, we will track the products for you once every 2 days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.

Certifications

Company Profile

Packaging & Shipping

FAQ

What Are Screw Shaft Threads?

A screw shaft is a threaded part used to fasten other components. The threads on a screw shaft are often described by their Coefficient of Friction, which describes how much friction is present between the mating surfaces. This article discusses these characteristics as well as the Material and Helix angle. You’ll have a better understanding of your screw shaft’s threads after reading this article. Here are some examples. Once you understand these details, you’ll be able to select the best screw nut for your needs.
screwshaft

Coefficient of friction between the mating surfaces of a nut and a screw shaft

There are 2 types of friction coefficients. Dynamic friction and static friction. The latter refers to the amount of friction a nut has to resist an opposing motion. In addition to the material strength, a higher coefficient of friction can cause stick-slip. This can lead to intermittent running behavior and loud squeaking. Stick-slip may lead to a malfunctioning plain bearing. Rough shafts can be used to improve this condition.
The 2 types of friction coefficients are related to the applied force. When applying force, the applied force must equal the nut’s pitch diameter. When the screw shaft is tightened, the force may be removed. In the case of a loosening clamp, the applied force is smaller than the bolt’s pitch diameter. Therefore, the higher the property class of the bolt, the lower the coefficient of friction.
In most cases, the screwface coefficient of friction is lower than the nut face. This is because of zinc plating on the joint surface. Moreover, power screws are commonly used in the aerospace industry. Whether or not they are power screws, they are typically made of carbon steel, alloy steel, or stainless steel. They are often used in conjunction with bronze or plastic nuts, which are preferred in higher-duty applications. These screws often require no holding brakes and are extremely easy to use in many applications.
The coefficient of friction between the mating surfaces of t-screws is highly dependent on the material of the screw and the nut. For example, screws with internal lubricated plastic nuts use bearing-grade bronze nuts. These nuts are usually used on carbon steel screws, but can be used with stainless steel screws. In addition to this, they are easy to clean.

Helix angle

In most applications, the helix angle of a screw shaft is an important factor for torque calculation. There are 2 types of helix angle: right and left hand. The right hand screw is usually smaller than the left hand one. The left hand screw is larger than the right hand screw. However, there are some exceptions to the rule. A left hand screw may have a greater helix angle than a right hand screw.
A screw’s helix angle is the angle formed by the helix and the axial line. Although the helix angle is not usually changed, it can have a significant effect on the processing of the screw and the amount of material conveyed. These changes are more common in 2 stage and special mixing screws, and metering screws. These measurements are crucial for determining the helix angle. In most cases, the lead angle is the correct angle when the screw shaft has the right helix angle.
High helix screws have large leads, sometimes up to 6 times the screw diameter. These screws reduce the screw diameter, mass, and inertia, allowing for higher speed and precision. High helix screws are also low-rotation, so they minimize vibrations and audible noises. But the right helix angle is important in any application. You must carefully choose the right type of screw for the job at hand.
If you choose a screw gear that has a helix angle other than parallel, you should select a thrust bearing with a correspondingly large center distance. In the case of a screw gear, a 45-degree helix angle is most common. A helix angle greater than zero degrees is also acceptable. Mixing up helix angles is beneficial because it allows for a variety of center distances and unique applications.
screwshaft

Thread angle

The thread angle of a screw shaft is measured from the base of the head of the screw to the top of the screw’s thread. In America, the standard screw thread angle is 60 degrees. The standard thread angle was not widely adopted until the early twentieth century. A committee was established by the Franklin Institute in 1864 to study screw threads. The committee recommended the Sellers thread, which was modified into the United States Standard Thread. The standardized thread was adopted by the United States Navy in 1868 and was recommended for construction by the Master Car Builders’ Association in 1871.
Generally speaking, the major diameter of a screw’s threads is the outside diameter. The major diameter of a nut is not directly measured, but can be determined with go/no-go gauges. It is necessary to understand the major and minor diameters in relation to each other in order to determine a screw’s thread angle. Once this is known, the next step is to determine how much of a pitch is necessary to ensure a screw’s proper function.
Helix angle and thread angle are 2 different types of angles that affect screw efficiency. For a lead screw, the helix angle is the angle between the helix of the thread and the line perpendicular to the axis of rotation. A lead screw has a greater helix angle than a helical one, but has higher frictional losses. A high-quality lead screw requires a higher torque to rotate. Thread angle and lead angle are complementary angles, but each screw has its own specific advantages.
Screw pitch and TPI have little to do with tolerances, craftsmanship, quality, or cost, but rather the size of a screw’s thread relative to its diameter. Compared to a standard screw, the fine and coarse threads are easier to tighten. The coarser thread is deeper, which results in lower torques. If a screw fails because of torsional shear, it is likely to be a result of a small minor diameter.

Material

Screws have a variety of different sizes, shapes, and materials. They are typically machined on CNC machines and lathes. Each type is used for different purposes. The size and material of a screw shaft are influenced by how it will be used. The following sections give an overview of the main types of screw shafts. Each 1 is designed to perform a specific function. If you have questions about a specific type, contact your local machine shop.
Lead screws are cheaper than ball screws and are used in light-duty, intermittent applications. Lead screws, however, have poor efficiency and are not recommended for continuous power transmission. But, they are effective in vertical applications and are more compact. Lead screws are typically used as a kinematic pair with a ball screw. Some types of lead screws also have self-locking properties. Because they have a low coefficient of friction, they have a compact design and very few parts.
Screws are made of a variety of metals and alloys. Steel is an economical and durable material, but there are also alloy steel and stainless steel types. Bronze nuts are the most common and are often used in higher-duty applications. Plastic nuts provide low-friction, which helps reduce the drive torques. Stainless steel screws are also used in high-performance applications, and may be made of titanium. The materials used to create screw shafts vary, but they all have their specific functions.
Screws are used in a wide range of applications, from industrial and consumer products to transportation equipment. They are used in many different industries, and the materials they’re made of can determine their life. The life of a screw depends on the load that it bears, the design of its internal structure, lubrication, and machining processes. When choosing screw assemblies, look for a screw made from the highest quality steels possible. Usually, the materials are very clean, so they’re a great choice for a screw. However, the presence of imperfections may cause a normal fatigue failure.
screwshaft

Self-locking features

Screws are known to be self-locking by nature. The mechanism for this feature is based on several factors, such as the pitch angle of the threads, material pairing, lubrication, and heating. This feature is only possible if the shaft is subjected to conditions that are not likely to cause the threads to loosen on their own. The self-locking ability of a screw depends on several factors, including the pitch angle of the thread flank and the coefficient of sliding friction between the 2 materials.
One of the most common uses of screws is in a screw top container lid, corkscrew, threaded pipe joint, vise, C-clamp, and screw jack. Other applications of screw shafts include transferring power, but these are often intermittent and low-power operations. Screws are also used to move material in Archimedes’ screw, auger earth drill, screw conveyor, and micrometer.
A common self-locking feature for a screw is the presence of a lead screw. A screw with a low PV value is safe to operate, but a screw with high PV will need a lower rotation speed. Another example is a self-locking screw that does not require lubrication. The PV value is also dependent on the material of the screw’s construction, as well as its lubrication conditions. Finally, a screw’s end fixity – the way the screw is supported – affects the performance and efficiency of a screw.
Lead screws are less expensive and easier to manufacture. They are a good choice for light-weight and intermittent applications. These screws also have self-locking capabilities. They can be self-tightened and require less torque for driving than other types. The advantage of lead screws is their small size and minimal number of parts. They are highly efficient in vertical and intermittent applications. They are not as accurate as lead screws and often have backlash, which is caused by insufficient threads.

China Standard Factory Supply Integrate Frame 28 Inch E Bike CZPT Rear Drive Motor City Road Ebike Electric Electrical Electronic Rickshaw Dirt Ebikes   wholesaler China Standard Factory Supply Integrate Frame 28 Inch E Bike CZPT Rear Drive Motor City Road Ebike Electric Electrical Electronic Rickshaw Dirt Ebikes   wholesaler

China OEM 2022 Vehicles VW ID4 Crozz Fast Electric Car SUV 5 Seats Electric Car SUV Used Left Hand Drive Electrical Car Automobile E Auto ID4 Electric Vehicle Motor Car near me factory

Product Description

ID.4 CROZZ PURE+
Car Body SIZE 4592*1852*1629mm
Wheelbase 2765mm
Minimum distance to ground
Body structure SUV
Full load mass (kg)
seats 5
Electromotor Motor type permanent magnet/synchronous
Maximum motor power 150kw
Maximum torque of motor 310 N.m
battery type Ternary lithium ion battery
battery capacity 84.8kwh
Max cruising range 550km
Max.speed 160km/h
Battery pack warranty 3 years/100000kms
fast charge 0.5 hour from 0%-80%
speed changing box The number of gear 1
Gear shift type Single-speed transmission for electric vehicles
Chassis steering Drive Mode RWD
Front Suspended system: McPherson independent suspension
Rear Suspended system: Multi-link independent suspension
Power type 100% Electric
car body structure Load-bearing car body structure
The wheel brake Brake type ventilated disc
Parking brake type Electronic parking
tyre size 235/55R19 255/50R19
Spare tire specifications Non-Full-Size
safety equipment Airbags driver/copilot
The seat belt is not fastened Front seats
ISOFIX
EBD/CBC
configuration
remote key Keyless access function Central color LCD screen
LED panel 12″ Keyless startup system The headlights are off late
USB Imitation leather seats Steering Wheel Adjustment
AUX All power window Color driving computer screen
SD 4 pcs USB(2 front/2 rear) Front and rear seat adjustment
AC aluminum alloy wheel Window anti – pinch function
Car central lock braking energy recovery The back seat is proportionally reclined
7 pcs trumpets cosmetic mirror The headlight height is adjustable
halogen lamp Backseat outlet One-button lift function of window
Front center rail Backrest adjustment Electrically adjust the rearview mirror

Product Description

2571 Vehicles VW ID4 CROZZ Fast Electric Car SUV 5 Seats Electric Car SUV Used Left Hand Drive Electrical car Automobile E Auto ID4 Electric Vehicle Motor car

Company Profile

Who we are?

UNILAND MOTORS, located in HangZhou of China, is a professional company specialized in electric cars exporting. Based on over 10 years’ EV exporting experience, our models now cover such types as Sedan, SUV, Commercial Van and so on. What’s more, rich stocks and stable supply chain have enabled us realize monthly at least 200 units delivery. With the rare export qualification certified by the Ministry of Commerce in China, as well as the agent of several big electric vehicle brands, we are more professional to supply customers with various EV models and high-quality after-sales service in all aspects.

What we could supply?

Till now, UNILAND has built stable cooperation with top EV brands by virtue of the wide sales network,specially authorized by some famous brands as distributors for global trading. We could provide you all the ev brands.

Why choose Uniland?

1) Competitive price. UNILAND has established close cooperation with some EV brand manufacturers and usually take cars with the quantity of several hundreds, so we can give customers very good price.

2) Stable supply chain. Establish close cooperation with EV factories and book VW production lines to assemble cars exclusively for UNILAND to guarantee rich available cars.  

3) Continuous fast delivery. With stable supply chain, we book vessels from shipping company directly, so that we can get the best freight and promise our customers best delivery time.

4) Complete after-sales service. We have professional after-sales service team, dealing with any problems faced from customers and helping customers buy spare parts for EVs in shortest time. Their quick response helps win good reputation for UNILAND.

Warehouse show

 

 

EV Loading & Delivery

 

Arrive at port & vessel

 

Customer’s feedback

 

FAQ

1. Which brand electric car could you supply?
    All electric car brands could be supplied.

2. What kind of payment terms can be acceptable?
    We’re flexible for payment terms, 30% T/T deposit and 70% T/T balance before shipment.

3. What’s your minimum Order quantity?
    1 unit, unsually big discount based on large quantity.

4. What’s your supportive policy for distributors in overseas market?
    We support in many aspects, including marketing, promotion, product development & improvements, service training, advertising etc.

5. What is your shipping type and delivery time?
    By train or by sea. Normally delivery time 15-25days after receiving your deposit.

 

Screws and Screw Shafts

A screw is a mechanical device that holds objects together. Screws are usually forged or machined. They are also used in screw jacks and press-fitted vises. Their self-locking properties make them a popular choice in many different industries. Here are some of the benefits of screws and how they work. Also read about their self-locking properties. The following information will help you choose the right screw for your application.

Machined screw shaft

A machined screw shaft can be made of various materials, depending on the application. Screw shafts can be made from stainless steel, brass, bronze, titanium, or iron. Most manufacturers use high-precision CNC machines or lathes to manufacture these products. These products come in many sizes and shapes, and they have varying applications. Different materials are used for different sizes and shapes. Here are some examples of what you can use these screws for:
Screws are widely used in many applications. One of the most common uses is in holding objects together. This type of fastener is used in screw jacks, vises, and screw presses. The thread pitch of a screw can vary. Generally, a smaller pitch results in greater mechanical advantage. Hence, a machined screw shaft should be sized appropriately. This ensures that your product will last for a long time.
A machined screw shaft should be compatible with various threading systems. In general, the ASME system is used for threaded parts. The threaded hole occupies most of the shaft. The thread of the bolt occupy either part of the shaft, or the entire one. There are also alternatives to bolts, including riveting, rolling pins, and pinned shafts. These alternatives are not widely used today, but they are useful for certain niche applications.
If you are using a ball screw, you can choose to anneal the screw shaft. To anneal the screw shaft, use a water-soaked rag as a heat barrier. You can choose from 2 different options, depending on your application. One option is to cover the screw shaft with a dust-proof enclosure. Alternatively, you can install a protective heat barrier over the screw shaft. You can also choose to cover the screw shaft with a dust-proof machine.
If you need a smaller size, you can choose a smaller screw. It may be smaller than a quarter of an inch, but it may still be compatible with another part. The smaller ones, however, will often have a corresponding mating part. These parts are typically denominated by their ANSI numerical size designation, which does not indicate threads-per-inch. There is an industry standard for screw sizes that is a little easier to understand.
screwshaft

Ball screw nut

When choosing a Ball screw nut for a screw shaft, it is important to consider the critical speed of the machine. This value excites the natural frequency of a screw and determines how fast it can be turned. In other words, it varies with the screw diameter and unsupported length. It also depends on the screw shaft’s diameter and end fixity. Depending on the application, the nut can be run at a maximum speed of about 80% of its theoretical critical speed.
The inner return of a ball nut is a cross-over deflector that forces the balls to climb over the crest of the screw. In 1 revolution of the screw, a ball will cross over the nut crest to return to the screw. Similarly, the outer circuit is a circular shape. Both flanges have 1 contact point on the ball shaft, and the nut is connected to the screw shaft by a screw.
The accuracy of ball screws depends on several factors, including the manufacturing precision of the ball grooves, the compactness of the assembly, and the set-up precision of the nut. Depending on the application, the lead accuracy of a ball screw nut may vary significantly. To improve lead accuracy, preloading, and lubrication are important. Ewellix ball screw assembly specialists can help you determine the best option for your application.
A ball screw nut should be preloaded prior to installation in order to achieve the expected service life. The smallest amount of preload required can reduce a ball screw’s calculated life by as much as 90 percent. Using a lubricant of a standard grade is recommended. Some lubricants contain additives. Using grease or oil in place of oil can prolong the life of the screw.
A ball screw nut is a type of threaded nut that is used in a number of different applications. It works similar to a ball bearing in that it contains hardened steel balls that move along a series of inclined races. When choosing a ball screw nut, engineers should consider the following factors: speed, life span, mounting, and lubrication. In addition, there are other considerations, such as the environment in which the screw is used.
screwshaft

Self-locking property of screw shaft

A self-locking screw is 1 that is capable of rotating without the use of a lock washer or bolt. This property is dependent on a number of factors, but 1 of them is the pitch angle of the thread. A screw with a small pitch angle is less likely to self-lock, while a large pitch angle is more likely to spontaneously rotate. The limiting angle of a self-locking thread can be calculated by calculating the torque Mkdw at which the screw is first released.
The pitch angle of the screw’s threads and its coefficient of friction determine the self-locking function of the screw. Other factors that affect its self-locking function include environmental conditions, high or low temperature, and vibration. Self-locking screws are often used in single-line applications and are limited by the size of their pitch. Therefore, the self-locking property of the screw shaft depends on the specific application.
The self-locking feature of a screw is an important factor. If a screw is not in a state of motion, it can be a dangerous or unusable machine. The self-locking property of a screw is critical in many applications, from corkscrews to threaded pipe joints. Screws are also used as power linkages, although their use is rarely necessary for high-power operations. In the archimedes’ screw, for example, the blades of the screw rotate around an axis. A screw conveyor uses a rotating helical chamber to move materials. A micrometer uses a precision-calibrated screw to measure length.
Self-locking screws are commonly used in lead screw technology. Their pitch and coefficient of friction are important factors in determining the self-locking property of screws. This property is advantageous in many applications because it eliminates the need for a costly brake. Its self-locking property means that the screw will be secure without requiring a special kind of force or torque. There are many other factors that contribute to the self-locking property of a screw, but this is the most common factor.
Screws with right-hand threads have threads that angle up to the right. The opposite is true for left-hand screws. While turning a screw counter-clockwise will loosen it, a right-handed person will use a right-handed thumb-up to turn it. Similarly, a left-handed person will use their thumb to turn a screw counter-clockwise. And vice versa.
screwshaft

Materials used to manufacture screw shaft

Many materials are commonly used to manufacture screw shafts. The most common are steel, stainless steel, brass, bronze, and titanium. These materials have advantages and disadvantages that make them good candidates for screw production. Some screw types are also made of copper to fight corrosion and ensure durability over time. Other materials include nylon, Teflon, and aluminum. Brass screws are lightweight and have aesthetic appeal. The choice of material for a screw shaft depends on the use it will be made for.
Shafts are typically produced using 3 steps. Screws are manufactured from large coils, wire, or round bar stock. After these are produced, the blanks are cut to the appropriate length and cold headed. This cold working process pressudes features into the screw head. More complicated screw shapes may require 2 heading processes to achieve the desired shape. The process is very precise and accurate, so it is an ideal choice for screw manufacturing.
The type of material used to manufacture a screw shaft is crucial for the function it will serve. The type of material chosen will depend on where the screw is being used. If the screw is for an indoor project, you can opt for a cheaper, low-tech screw. But if the screw is for an outdoor project, you’ll need to use a specific type of screw. This is because outdoor screws will be exposed to humidity and temperature changes. Some screws may even be coated with a protective coating to protect them from the elements.
Screws can also be self-threading and self-tapping. The self-threading or self-tapping screw creates a complementary helix within the material. Other screws are made with a thread which cuts into the material it fastens. Other types of screws create a helical groove on softer material to provide compression. The most common uses of a screw include holding 2 components together.
There are many types of bolts available. Some are more expensive than others, but they are generally more resistant to corrosion. They can also be made from stainless steel or aluminum. But they require high-strength materials. If you’re wondering what screws are, consider this article. There are tons of options available for screw shaft manufacturing. You’ll be surprised how versatile they can be! The choice is yours, and you can be confident that you’ll find the screw shaft that will best fit your application.

China OEM 2022 Vehicles VW ID4 Crozz Fast Electric Car SUV 5 Seats Electric Car SUV Used Left Hand Drive Electrical Car Automobile E Auto ID4 Electric Vehicle Motor Car   near me factory China OEM 2022 Vehicles VW ID4 Crozz Fast Electric Car SUV 5 Seats Electric Car SUV Used Left Hand Drive Electrical Car Automobile E Auto ID4 Electric Vehicle Motor Car   near me factory

China Best Sales E Bike with MID Drive System CZPT G510 Center Motor 27.5inch Mountain Electric Bike near me shop

Product Description

Main Features
250w-1000w geared brushless motor 8FUN, SOF, MXUS brand
 36v/48v lithium battery, rear rack battery
 OEM options of frame and wheel colors
Main Components
  AMS-TDE-14B other options
 Motor: 36v350W rear hub motor 48V 350W/500W/750w/1000w
 Battery: 36V10Ah Lithium battery 48v 11.6Ah or much more powerful
 Display : LED 790 LCD functional display
 Brake system Disc Brake Hydraulic brake
 PAS: 1:1 intelligent PAS systerm
 Charger: 110~240V, 50-60Hz, Plug according to final market requirement 
 Brake lever: Cheap option and TEKTRO brand
 Wheel: 26″x4.0 W/O wholes
 Controller: 36V/48V smart controller
 Fork: suspension fork
Optional Components
 F/R Light LED
 Throttle: Thumb or Twist throttle
 Color: shinning black/mat black/white/black/orange/blue/green/any other specilized
 Seat post: suspension
 Packing
 G.W. 36 kgs
 N.W: 32 kgs
 Carton size: 156*38*80 CM
 Container QTY: 60pcs/20’GP, 120pcs/40’GP


Company Information

HangZhou Aimos Technology Co.,Ltd, located in HangZhou City, ZheJiang  Province,one hour hi-speed 
train from ZheJiang  and HangZhou.
The company is engaged in export kinds of electric products and techniques of Electric Bikes , electric
bike kits, and electric scooters, and so on.

Our Services

1. Our products are targeted for the overseas demanding market, and we have a strong sense of
   responsibility for the quality, we consider quality as our life.

2. We choose good suppliers to work together; the main fittings are mostly from Japan, ZheJiang
    and other  top suppliers.

3. We carry on periodic training to our staffs, in order to enhance their consciousness of quality.

4. All the components should be checked carefully before assembling, thus, we can make sure that
    the broken or deficient components will not be fixed to the electric bikes.

5. Each electric bikes will be strictly inspected before packing and shipping out to insure that the
    could be satisfied with you.

6. We always try to improve the quality of our products, meanwhile we pay much attention to our    
     customer service,  we will provide a certain amount of free spare part to you when you
     place a quantity order, quality problems will be solved at the first time when you come across it.

 

FAQ

1. Q: Can I get some samples? 
    A:we offer sample for quality check. Considering electric bike as big item with certern value,we don’t
       offer free sample and transportation fee is not contained in sample price .

2. Q: Do you have the products in stock? 
    A:  we do have product in stock for demestic sale,it may not suit your demand.

3. Q: What’s the delivery time? 
    A: It usually takes about 15-25 working days
         But the exact delivery time might be different for different orders or at different time.Once we
         confirmed all detail of order, we’ll put all source into it.

4. Q: Can I mix different models in 1 container? 
    A: Yes, different models can be mixed in 1 container.

5. Q: Should we pay the high taxes? 
    A:  We can make a low-value invoice to help you clearing Customs and avoid the taxes.

6. Q:Do you accept Paypal ? 
    A: Yes, we accept Paypal. Besides, we offer bank transfer and Western Union.

7. Q:Why choose you?
    A:Strong quality controll : We test and check all the parts before on produce line
       Check and test esch unit when it ready.

8.Q:When you on the line for service
A: We ussally on the line at 8:30am to 5:30pm ZheJiang time. Otherwise,
     We also can do service for you after the working time.

9.Q:Are you a factory or a import and export company?
  
A:We are a manufacture ,So as a professional manufacture we not only can supply the bike we
       have, We also can design for you if you have the draft

Drive shaft type

The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are 3 main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.
air-compressor

tube yoke

Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16″ and an overall width of 4½”. U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat’s drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It’s a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.
air-compressor

end yoke

If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join 2 heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or “slips” can be purchased separately. Whether you need a new 1 or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT’s drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don’t want to modify your existing drivetrain, we can even make a custom yoke for you.

China Best Sales E Bike with MID Drive System CZPT G510 Center Motor 27.5inch Mountain Electric Bike     near me shop China Best Sales E Bike with MID Drive System CZPT G510 Center Motor 27.5inch Mountain Electric Bike     near me shop