Product Description
SPECIFICATION
Center Lap Seal Pouch / Bag Making Machine Serious
| Equipment | Center Lap Seal 350 | Center Lap Seal 450 | Center Lap Seal 600 |
| Model | HD-350BTZ | HD-450BTZ | HD-600BTZ |
| Max. Unwinding Width(mm) | 850 | 1050 | 1200 |
| Max. Pouch Width(mm) | 350 | 450 | 600 |
| Min. Pouch Height(mm) | 50 | ||
| Max. Gusset Depth(mm) | 60 | ||
| Max. Feeding Speed(m/min) | 45 | ||
| Pouch Making Speed(pcs/min) | 120-200 Depends on specific condition of machine operating and material | ||
Center Lap & Fin Pouch / Bag Making Machine Serious
| Equipment | Center Lap & Fin Seal 350 |
Center Lap & Fin Seal 450 |
Center Lap & Fin Seal 600 |
| Model | HD-350BTQZ | HD-450BTQZ | HD-600BTQZ |
| Max. Unwinding Width(mm) | 850 | 1050 | 1200 |
| Max. Pouch Width(mm) | 350 | 450 | 600 |
| Min. Pouch Height(mm) | 50 | ||
| Max. Gusset Depth(mm) | 60 | ||
| Max. Feeding Speed(m/min) | 45 | ||
| Pouch Making Speed(pcs/min) | 120-200 Depends on specific condition of machine operating and material | ||
Center Seal Stand-Up Pouch / Bag Machine Serious
| Equipment | Center Lap & Fin Seal 450 | Center Seal & Stand-up 600 | |
| Model | HD-450BTZMML | HD-600BTZMML | |
| Max. Unwinding Width(mm) | 1050 | 1200 | |
| Max. Pouch Width(mm) | 450 | 600 | |
| Min. Pouch Height(mm) | 30 | ||
| Max. Gusset Depth(mm) | 60 | ||
| Max. Feeding Speed(m/min) | 45 | ||
| Pouch Making Speed(pcs/min) | 100-180 Depends on specific condition of machine operating and material | ||
3-Side Seal Pouch / Bag Making Machine Serious
| Equipment | 3-Side Seal 600 | ||
| Model | HD-600BU | ||
| Max. Unwinding Width(mm) | 1200 | ||
| Max. Pouch Width(mm) | 600 | ||
| Min. Pouch Height(mm) | 30 | ||
| Max. Feeding Speed(m/min) | 45 | ||
| Pouch Making Speed(pcs/min) | 200 Depends on specific condition of machine operating and material | ||
3-Side Seal & Stand-Up Pouch / Bag Making Machine Serious
| Equipment | 3-Side Seal & Stand-Up 600 | ||
| Model | HD-600BUML | ||
| Max. Unwinding Width(mm) | 1200 | ||
| Max. Pouch Width(mm) | 600 | ||
| Min. Pouch Height(mm) | 50 | ||
| Max. Feeding Speed(m/min) | 45 | ||
| Pouch Making Speed(pcs/min) | 100-180 Depends on specific condition of machine operating and material | ||
3-Side Seal & Stand-Up Plus Pouch / Bag Making Machine Serious
| Equipment | 3-Side Seal & Stand-Up Plus 600 | ||
| Model | HD-600BULL | ||
| Max. Unwinding Width(mm) | 1200 | ||
| Max. Pouch Width(mm) | 600 | ||
| Min. Pouch Height(mm) | 50 | ||
| Max. Feeding Speed(m/min) | 45 | ||
| Pouch Making Speed(pcs/min) | 100-180 Depends on specific condition of machine operating and material | ||
3-Side Seal & Stand-Up Ultra Pouch / Bag Making Machine Serious
| Equipment | 3-Side Seal & Stand-Up Ultra 850 |
3-Side Seal & Stand-Up Ultra 1100 |
3-Side Seal & Stand-Up Ultra 1250 |
| Model | HD-850BU | HD-1100BU | HD-1250BU |
| Max. Unwinding Width(mm) | 1500 Single Unwiding | 1100 Double Unwiding | 1250 Double Unwiding |
| Max. Pouch Width(mm) | 850 | 1100 | 1250 |
| Min. Pouch Height(mm) | 50 | ||
| Max. Feeding Speed(m/min) | 45 | ||
| Pouch Making Speed(pcs/min) | 120-180 Depends on specific condition of machine operating and material | ||
Flat Bottom Pouch / Bag Making Machine Serious
| Equipment | Flat Bottom 600 | ||
| Model | HD-600BF | ||
| Max. Unwinding Width(mm) | 1200 | ||
| Max. Feeding Speed(m/min) | 45 | ||
| Pouch Making Speed(pcs/min) | 90-110 Depends on specific condition of machine operating and material | ||
As a technology-based company with independent R&D and manufacturing capabilities, Tie Min’s founding team already has extensive experience in the flexible packaging industry more earlier before its establishement in 2001, which makes Tie Min can design and produce the bag / pouch machine from the perspective of customers – we came from the customers, and we are going back to the customers, we know flexible packaging industry better, so can make pouch / bag making machine right.After more than 20 years of continuous development in the industry, Tie Min has accumulated a wealth of experience in designing, technical and economic evaluation, manufacturing, installation, commissioning, staff training, and after-sales service, and have been striving to create lasting relationships with customers all over the world, guarantee that they can count on us for CZPT pricing and quality with zero hassle, which is based on a complete set of production and testing equipment, a perfect managment of supply chain, as well as a group of highly qualified professional technicians of designing, construction, and manufacturing.
Tie Min Machine is dedicated to helping customers get the most right solutions of flexible packaging.
Let us know what we can do for your business by leaving us a message. We’re here to make sure you don’t have to worry about anything.
Features: · PLC Controlled Pneumatic Locking Unwinding System integrated with extra EPC to achieve more precise control and more stable feeding – Pouch Making Speed and Yield Rate Guaranteed · Multiple Photoelectric Sensors and Mechanical Limits are applied to the material with and without printing to achieve production with different materials in just 1 machine – Early Investment Minimized · CRT Touch Screen with Remote Diagnostic and Restoration Function, plus a full set of manual CZPT and mature after-sales service -Convenience of machine operation guaranteed · Multiple auto-running functions available, such as Auto counting, Hole Punching/ Length Measuring / Sealing Speed Setting, making it possible for multiple machines controlled by just 1 man – Labour Cost Minimized · Mature Warning and Auto Stop System avoid loss caused by Temperature Lossing, Abnormal Unwinding and Feeding, Photoelectric Sensor and Servo Motor Going Down, etc. to Minimize Material Waste – Production costs Minimized FAQ Q:Are you factory or trading company? A:We are an original FACTORY specializing in designing, manufacturing, and customizing pouch bag making machines for over 20 years, we sincerely and warmly welcome all kinds of clients including the end customers, dealers, and sole agencies discuss with us about all forms of cooperation. Q:Where is your factory located? A:We are located in HangZhou City, 2 hours from ZheJiang by train or car, and 3 hours from HangZhou by air. Q: What kind of pouch bags can your machine make? A:The regular machine types we are selling can produce varieties of laminated pouches/bags, including but not limited to the following bag types: 2-Side seal pouch bag, 3-Side seal pouch bag, 4-Side seal pouch bag; Lap seal pouch bag, Fin seal pouch bag; Side gusset pouch bag, Bottom gusset pouch bag; Center seal pouch bag, Side seal pouch bag, Bottom seal pouch bag; Flat bottom pouch bag / Plough bottom pouch bag; K Seal pouch bag / Skirt seal pouch bag; Round bottom pouch bag / Doyen bag / Doypack; Corner bottom pouch bag / Plow bottom pouch bag/ Folded bottom pouch bag. We will be very glad to discuss with our clients if they have any special demand for packing solutions, providing them with varieties of customization. Q: What kinds of pouch bag material are available for your machine? A: Our machines can produce laminated pouch bags made with varieties of material, including Aluminum and Plastic like PET, BOPET, OPP, BOPP, LDPE, HDPE, PA, and so on, any special demands of material will be welcome to be discussed with us, we will be glad to help our customers to get the right packing solutions. Q:What’s your after-sale service policy? A:6 months warranty for electronic components + 12 months warranty for mechanical parts. On-site installation and adjustment or remote guidance via the internet Employee technical training Repair and Technical Support Q: What certification do you have? A: With the cooperation of a responsible production management team and an experienced technical team, we have obtained ISO9001 certification from UKAS and CE certification from SGS, and have independently developed more than 30 patents in the past 20 years.
How to Choose the Right Worm Shaft
You might be curious to know how to choose the right Worm Shaft. In this article, you will learn about worm modules with the same pitch diameter, Double-thread worm gears, and Self-locking worm drive. Once you have chosen the proper Worm Shaft, you will find it easier to use the equipment in your home. There are many advantages to selecting the right Worm Shaft. Read on to learn more.
Concave shape
The concave shape of a worm’s shaft is an important characteristic for the design of a worm gearing. Worm gearings can be found in a wide range of shapes, and the basic profile parameters are available in professional and firm literature. These parameters are used in geometry calculations, and a selection of the right worm gearing for a particular application can be based on these requirements.
The thread profile of a worm is defined by the tangent to the axis of its main cylinder. The teeth are shaped in a straight line with a slightly concave shape along the sides. It resembles a helical gear, and the profile of the worm itself is straight. This type of gearing is often used when the number of teeth is greater than a certain limit.
The geometry of a worm gear depends on the type and manufacturer. In the earliest days, worms were made similar to simple screw threads, and could be chased on a lathe. During this time, the worm was often made with straight-sided tools to produce threads in the acme plane. Later, grinding techniques improved the thread finish and reduced distortions resulting from hardening.
When a worm gearing has multiple teeth, the pitch angle is a key parameter. A greater pitch angle increases efficiency. If you want to increase the pitch angle without increasing the number of teeth, you can replace a worm pair with a different number of thread starts. The helix angle must increase while the center distance remains constant. A higher pitch angle, however, is almost never used for power transmissions.
The minimum number of gear teeth depends on the angle of pressure at zero gearing correction. The diameter of the worm is d1, and is based on a known module value, mx or mn. Generally, larger values of m are assigned to larger modules. And a smaller number of teeth is called a low pitch angle. In case of a low pitch angle, spiral gearing is used. The pitch angle of the worm gear is smaller than 10 degrees.
Multiple-thread worms
Multi-thread worms can be divided into sets of one, two, or 4 threads. The ratio is determined by the number of threads on each set and the number of teeth on the apparatus. The most common worm thread counts are 1,2,4, and 6. To find out how many threads you have, count the start and end of each thread and divide by two. Using this method, you will get the correct thread count every time.
The tangent plane of a worm’s pitch profile changes as the worm moves lengthwise along the thread. The lead angle is greatest at the throat, and decreases on both sides. The curvature radius r” varies proportionally with the worm’s radius, or pitch angle at the considered point. Hence, the worm leads angle, r, is increased with decreased inclination and decreases with increasing inclination.
Multi-thread worms are characterized by a constant leverage between the gear surface and the worm threads. The ratio of worm-tooth surfaces to the worm’s length varies, which enables the wormgear to be adjusted in the same direction. To optimize the gear contact between the worm and gear, the tangent relationship between the 2 surfaces is optimal.
The efficiency of worm gear drives is largely dependent on the helix angle of the worm. Multiple thread worms can improve the efficiency of the worm gear drive by as much as 25 to 50% compared to single-thread worms. Worm gears are made of bronze, which reduces friction and heat on the worm’s teeth. A specialized machine can cut the worm gears for maximum efficiency.
Double-thread worm gears
In many different applications, worm gears are used to drive a worm wheel. These gears are unique in that the worm cannot be reversed by the power applied to the worm wheel. Because of their self-locking properties, they can be used to prevent reversing motion, although this is not a dependable function. Applications for worm gears include hoisting equipment, elevators, chain blocks, fishing reels, and automotive power steering. Because of their compact size, these gears are often used in applications with limited space.
Worm sets typically exhibit more wear than other types of gears, and this means that they require more limited contact patterns in new parts. Worm wheel teeth are concave, making it difficult to measure tooth thickness with pins, balls, and gear tooth calipers. To measure tooth thickness, however, you can measure backlash, a measurement of the spacing between teeth in a gear. Backlash can vary from 1 worm gear to another, so it is important to check the backlash at several points. If the backlash is different in 2 places, this indicates that the teeth may have different spacing.
Single-thread worm gears provide high speed reduction but lower efficiency. A multi-thread worm gear can provide high efficiency and high speed, but this comes with a trade-off in terms of horsepower. However, there are many other applications for worm gears. In addition to heavy-duty applications, they are often used in light-duty gearboxes for a variety of functions. When used in conjunction with double-thread worms, they allow for a substantial speed reduction in 1 step.
Stainless-steel worm gears can be used in damp environments. The worm gear is not susceptible to rust and is ideal for wet and damp environments. The worm wheel’s smooth surfaces make cleaning them easy. However, they do require lubricants. The most common lubricant for worm gears is mineral oil. This lubricant is designed to protect the worm drive.
Self-locking worm drive
A self-locking worm drive prevents the platform from moving backward when the motor stops. A dynamic self-locking worm drive is also possible but does not include a holding brake. This type of self-locking worm drive is not susceptible to vibrations, but may rattle if released. In addition, it may require an additional brake to keep the platform from moving. A positive brake may be necessary for safety.
A self-locking worm drive does not allow for the interchangeability of the driven and driving gears. This is unlike spur gear trains that allow both to interchange positions. In a self-locking worm drive, the driving gear is always engaged and the driven gear remains stationary. The drive mechanism locks automatically when the worm is operated in the wrong manner. Several sources of information on self-locking worm gears include the Machinery’s Handbook.
A self-locking worm drive is not difficult to build and has a great mechanical advantage. In fact, the output of a self-locking worm drive cannot be backdriven by the input shaft. DIYers can build a self-locking worm drive by modifying threaded rods and off-the-shelf gears. However, it is easier to make a ratchet and pawl mechanism, and is significantly less expensive. However, it is important to understand that you can only drive 1 worm at a time.
Another advantage of a self-locking worm drive is the fact that it is not possible to interchange the input and output shafts. This is a major benefit of using such a mechanism, as you can achieve high gear reduction without increasing the size of the gear box. If you’re thinking about buying a self-locking worm gear for a specific application, consider the following tips to make the right choice.
An enveloping worm gear set is best for applications requiring high accuracy and efficiency, and minimum backlash. Its teeth are shaped differently, and the worm’s threads are modified to increase surface contact. They are more expensive to manufacture than their single-start counterparts, but this type is best for applications where accuracy is crucial. The worm drive is also a great option for heavy trucks because of their large size and high-torque capacity.
