Product Description
Hot selling!!Multi-Spindle CNC Router RJ1325 Machine in market
Product Description
Features
*Cylinder multi-spindle CNC Router is mainly designed for changing tools easily while it is working.For example, when you make a workpiece by 2 or 3 tools to make different patterns, the cylinder Multi-spindle CNC Router can Shorten the time of adjusting and checking the tools. After turning on the machine and once adjusting the knife, the machine can complete all the work absolutely at the same time and you can choose a horizontal side spindle to process keyhole slot, which can increase the efficiency.
*Separated Multi-Spindle CNC Router, the power and quantity of the spindle motor can be properly increased. While the cost of it is more expensive than Board-hold Multi-head CNC Router.
*Board-holden Multi-spindle CNC Router is an economical machine. Normally the spindle power is 800W-1.5KW. It is very stable by regular cutting speed. All the spindles must work together.
Techanical parameters
| MODEL | RJ-1325 |
| Processing size (X*Y*Z) | 1300*2500*180mm |
| Spindle power | 3.0KW/4.5KW/5.5KW with water-cooling |
| Spindle speeding | 18000-24000 rpm/min |
| Control System | DSP/NC Studio |
| Motor and driver | Servo motor |
| Working table | Vacuum table |
| Xihu (West Lake) Dis. Rail | Sauqre Rail and Rack |
| Tool Diameter | Φ3.175mm Φ6.0mm Φ12.7mm |
Introduction
The multi-spindle CNC Routers of small working size are designed for the engraving on solid wood furniture. This series includes the separated multi-spindle CNC Router (2-6 heads), cylinder Multi-spindle (2-3 heads), Board-holder multi-spindle (2-6 heads)etc. It applies to the small working piece engraving with high working efficiency .
Packaging & Shipping
Packing details
1.Outside packing:Standard marine export wooden case.
2.Inner package:three layers in total,EPE pearl cotton film+PE stretchy film.
Improved packaage,much more strong and environmental protecion.
We can also make package according to your request.
Our Services
After-sale service&Warranty:
1.24 months quality guaranty, the machine with main parts(excluding the consumables)shall be changed free of charge if there is any problem during the warranty period.
2.Lifetime maintenance free of charge.
3.Free training course at our plant.
4.We will provide the consumable parts at an agency price when you need replacement.
5.24 hours on line service each day, free technical support.
6.Machine has been adjusted before delivery.
7.Our staff can be sent to your company to install or adjust if necessary.
Company Information
RUIJIE COMPANY
HangZhou Ruijie Mechanical Equipment CO., Ltd was established in 2002 and is located in HangZhou city,ZheJiang Province.
We have an enough experience in design,Production,sales,after-sales services.
We are well known for our superior quality and service in the field of manufacturing and engineering of CNC Router machine,Laser engraving and cutting machine,Fiber laser cutting machine,Plasma cutter machine etc,.
Welcome to visit us,click ruijie to learn more about us.
Popular model
| CNC Router machine RJ-1325C | Metal/Non-metal Laser engraving RJ-1390 machine |
Exhibition Picture
FAQ
Q1,How long is the warranty time of the machine?
A1:1 year.
Q2,What is the delivery time of the machine?
A2:17 working days after receive the deposit.
Q3,Does the company provide OEM services?
A3:Yes, Our Company provide OEM services and we have 17 years experienced.
Q4,Do you accept an exclusive national sales agent?
A4:We accept and we are also looking for distributors around the world.
Q5,How to provide after sales service?
A5:When you buy our machine, we can train you for free in our factory or we can send engineer to your factory give you a 7 days training, so you can quickly put the carver into service. The training included: to Learn the basic operation engraving machine, to understand the use of various functions of carving machine, to maintain normal running of the engraving machine operation. We can provide 1 year free on-site maintenance service and long-term maintenance service.
Q6,How to transport and how long is the transportation time?
A6:Ocean Shipping, Air Shipping, Courier Shipping.
Contact ways
What is a driveshaft and how much does it cost to replace one?
Your vehicle is made up of many moving parts. Knowing each part is important because a damaged driveshaft can seriously damage other parts of the car. You may not know how important your driveshaft is, but it’s important to know if you want to fix your car. In this article, we’ll discuss what a driveshaft is, what its symptoms are, and how much it costs to replace a driveshaft.
Repair damaged driveshafts
A damaged driveshaft does not allow you to turn the wheels freely. It also exposes your vehicle to higher repair costs due to damaged driveshafts. If the drive shaft breaks while the car is in motion, it may cause a crash. Also, it can significantly affect the performance of the car. If you don’t fix the problem right away, you could risk more expensive repairs. If you suspect that the drive shaft is damaged, do the following.
First, make sure the drive shaft is protected from dust, moisture, and dust. A proper driveshaft cover will prevent grease from accumulating in the driveshaft, reducing the chance of further damage. The grease will also cushion the metal-to-metal contact in the constant velocity joints. For example, hitting a soft material is better than hitting a metal wall. A damaged prop shaft can not only cause difficult cornering, but it can also cause the vehicle to vibrate, which can further damage the rest of the drivetrain.
If the driveshaft is damaged, you can choose to fix it yourself or take it to a mechanic. Typically, driveshaft repairs cost around $200 to $300. Parts and labor may vary based on your vehicle type and type of repair. These parts can cost up to $600. However, if you don’t have a mechanical background, it’s better to leave it to a professional.
If you notice that 1 of the 2 drive shafts is worn, it’s time to repair it. Worn bushings and bearings can cause the drive shaft to vibrate unnecessarily, causing it to break and cause further damage. You can also check the center bearing if there is any play in the bearing. If these symptoms occur, it is best to take your car to a mechanic as soon as possible.
Learn about U-joints
While most vehicles have at least 1 type of U-joint, there are other types available. CV joints (also known as hot rod joints) are used in a variety of applications. The minor axis is shorter than the major axis on which the U-joint is located. In both cases, the U-joints are lubricated at the factory. During servicing, the drive shaft slip joint should be lubricated.
There are 2 main styles of U-joints, including forged and press fit. They are usually held in place by C-clamps. Some of these U-joints have knurls or grooves. When selecting the correct fitting, be sure to measure the entire fitting. To make sure you get the correct size, you can use the size chart or check the manual for your specific model.
In addition to lubrication, the condition of the U-joint should be checked regularly. Lubricate them regularly to avoid premature failure. If you hear a clicking sound when shifting gears, the u-joint space may be misaligned. In this case, the bearing may need to be serviced. If there is insufficient grease in the bearings, the universal joint may need to be replaced.
U-joint is an important part of the automobile transmission shaft. Without them, your car would have no wheeled suspension. Without them, your vehicle will have a rickety front end and a wobbly rear end. Because cars can’t drive on ultra-flat surfaces, they need flexible driveshafts. The U-joint compensates for this by allowing it to move up and down with the suspension.
A proper inspection will determine if your u-joints are loose or worn. It should be easy to pull them out. Make sure not to pull them all the way out. Also, the bearing caps should not move. Any signs of roughness or wear would indicate a need for a new UJ. Also, it is important to note that worn UJs cannot be repaired.
Symptoms of Driveshaft Failure
One of the most common problems associated with a faulty driveshaft is difficulty turning the wheels. This severely limits your overall control over the vehicle. Fortunately, there are several symptoms that could indicate that your driveshaft is failing. You should take immediate steps to determine the cause of the problem. One of the most common causes of driveshaft failure is a weak or faulty reverse gear. Other common causes of driveshaft damage include driving too hard, getting stuck in reverse gear and differential lock.
Another sign of a failed driveshaft is unusual noise while driving. These noises are usually the result of wear on the bushings and bearings that support the drive shaft. They can also cause your car to screech or scratch when switching from drive to idle. Depending on the speed, the noise may be accompanied by vibration. When this happens, it’s time to send your vehicle in for a driveshaft replacement.
One of the most common symptoms of driveshaft failure is noticeable jitter when accelerating. This could be a sign of a loose U-joint or worn center bearing. You should thoroughly inspect your car to determine the cause of these sounds and corresponding symptoms. A certified mechanic can help you determine the cause of the noise. A damaged propshaft can severely limit the drivability of the vehicle.
Regular inspection of the drive shaft can prevent serious damage. Depending on the damage, you can replace the driveshaft for anywhere from $500 to $1,000. Depending on the severity of the damage and the level of repair, the cost will depend on the number of parts that need to be replaced. Do not drive with a bad driveshaft as it can cause a serious crash. There are several ways to avoid this problem entirely.
The first symptom to look for is a worn U-joint. If the U-joint comes loose or moves too much when trying to turn the steering wheel, the driveshaft is faulty. If you see visible rust on the bearing cap seals, you can take your car to a mechanic for a thorough inspection. A worn u-joint can also indicate a problem with the transmission.
The cost of replacing the drive shaft
Depending on your state and service center, a driveshaft repair can cost as little as $300 or as high as $2,000, depending on the specifics of your car. Labor costs are usually around $70. Prices for the parts themselves range from $400 to $600. Labor costs also vary by model and vehicle make. Ultimately, the decision to repair or replace the driveshaft will depend on whether you need a quick car repair or a full car repair.
Some cars have 2 separate driveshafts. One goes to the front and the other goes to the back. If your car has 4 wheel drive, you will have two. If you’re replacing the axles of an all-wheel-drive car, you’ll need a special part for each axle. Choosing the wrong 1 can result in more expensive repairs. Before you start shopping, you should know exactly how much it will cost.
Depending on the type of vehicle you own, a driveshaft replacement will cost between PS250 and PS500. Luxury cars can cost as much as PS400. However, for safety and the overall performance of the car, replacing the driveshaft may be a necessary repair. The cost of replacing a driveshaft depends on how long your car has been on the road and how much wear and tear it has experienced. There are some symptoms that indicate a faulty drive shaft and you should take immediate action.
Repairs can be expensive, so it’s best to hire a mechanic with experience in the field. You’ll be spending hundreds of dollars a month, but you’ll have peace of mind knowing the job will be done right. Remember that you may want to ask a friend or family member to help you. Depending on the make and model of your car, replacing the driveshaft is more expensive than replacing the parts and doing it yourself.
If you suspect that your drive shaft is damaged, be sure to fix it as soon as possible. It is not advisable to drive a car with abnormal vibration and sound for a long time. Fortunately, there are some quick ways to fix the problem and avoid costly repairs later. If you’ve noticed the symptoms above, it’s worth getting the job done. There are many signs that your driveshaft may need service, including lack of power or difficulty moving the vehicle.
