Tag Archives: china machine

China supplier Fully Electric Drive Semi Automatic PP Belt Bundle Paper Carton Strapping Machine with Great quality

Product Description

HangZhou CZPT MACHINERY CO.,LTD—The Integrated Provider of Plastic Recycling,Producing and Extruding.

# Owned Eastern Sun Brand
# Have 28 Years Production Experiences
# Execute 120+ Cooperated Projects Each Year
# Provide Technical support For 2

How to Identify a Faulty Drive Shaft

The most common problems associated with automotive driveshafts include clicking and rubbing noises. While driving, the noise from the driver’s seat is often noticeable. An experienced auto mechanic can easily identify whether the sound is coming from both sides or from 1 side. If you notice any of these signs, it’s time to send your car in for a proper diagnosis. Here’s a guide to determining if your car’s driveshaft is faulty:

Symptoms of Driveshaft Failure

If you’re having trouble turning your car, it’s time to check your vehicle’s driveshaft. A bad driveshaft can limit the overall control of your car, and you should fix it as soon as possible to avoid further problems. Other symptoms of a propshaft failure include strange noises from under the vehicle and difficulty shifting gears. Squeaking from under the vehicle is another sign of a faulty driveshaft.
If your driveshaft fails, your car will stop. Although the engine will still run, the wheels will not turn. You may hear strange noises from under the vehicle, but this is a rare symptom of a propshaft failure. However, you will have plenty of time to fix the problem. If you don’t hear any noise, the problem is not affecting your vehicle’s ability to move.
The most obvious signs of a driveshaft failure are dull sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is likely to damage the transmission. It will require a trailer to remove it from your vehicle. Apart from that, it can also affect your car’s performance and require repairs. So if you hear these signs in your car, be sure to have it checked by a mechanic right away.

Drive shaft assembly

When designing a propshaft, the design should be based on the torque required to drive the vehicle. When this torque is too high, it can cause irreversible failure of the drive shaft. Therefore, a good drive shaft design should have a long service life. Here are some tips to help you design a good driveshaft. Some of the main components of the driveshaft are listed below.
Snap Ring: The snap ring is a removable part that secures the bearing cup assembly in the yoke cross hole. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined element with a series of ridges that fit into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required due to the angular displacement between the T-shaped housing and the pinion. This angle is especially large in raised 4x4s. The design of the U-joint must guarantee a constant rotational speed. Proper driveshaft design must account for the difference in angular velocity between the shafts. The T-bracket and output shaft are attached to the bearing caps at both ends.

U-joint

Your vehicle has a set of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it yourself. You will need a hammer, ratchet and socket. In order to remove the U-joint, you must first remove the bearing cup. In some cases you will need to use a hammer to remove the bearing cup, you should be careful as you don’t want to damage the drive shaft. If you cannot remove the bearing cup, you can also use a vise to press it out.
There are 2 types of U-joints. One is held by a yoke and the other is held by a c-clamp. A full ring is safer and ideal for vehicles that are often used off-road. In some cases, a full circle can be used to repair a c-clamp u-joint.
In addition to excessive torque, extreme loads and improper lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be damaged if the engine is modified. If you are driving a vehicle with a heavily modified engine, it is not enough to replace the OE U-joint. In this case, it is important to take the time to properly lubricate these components as needed to keep them functional.

tube yoke

QU40866 Tube Yoke is a common replacement for damaged or damaged driveshaft tubes. They are desirably made of a metallic material, such as an aluminum alloy, and include a hollow portion with a lug structure at 1 end. Tube yokes can be manufactured using a variety of methods, including casting and forging. A common method involves drawing solid elements and machining them into the final shape. The resulting components are less expensive to produce, especially when compared to other forms.
The tube fork has a connection point to the driveshaft tube. The lug structure provides attachment points for the gimbal. Typically, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug structure also serves as a mounting point for the drive shaft. Once installed, Tube Yoke is easy to maintain. There are 2 types of lug structures: 1 is forged tube yoke and the other is welded.
Heavy-duty series drive shafts use bearing plates to secure the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are usually machined to accept U-bolts. For some applications, grease fittings are used. This attachment is more suitable for off-road vehicles and performance vehicles.

end yoke

The end yoke of the drive shaft is an integral part of the drive train. Choosing a high-quality end yoke will help ensure long-term operation and prevent premature failure. Pat’s Driveline offers a complete line of automotive end yokes for power take-offs, differentials and auxiliary equipment. They can also measure your existing parts and provide you with high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it provides greater stability in unstable terrain. You can purchase a U-bolt kit to secure the pinion carrier to the drive shaft. U-bolts also come with lock washers and nuts. Performance cars and off-road vehicles often use this type of attachment. But before you install it, you have to make sure the yoke is machined to accept it.
End yokes can be made of aluminum or steel and are designed to provide strength. It also offers special bolt styles for various applications. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The company also produces custom flanged yokes for many popular brands. Since the company has a comprehensive line of replacement flange yokes, it can help you transform your drivetrain from non-serviceable to serviceable.

bushing

The first step in repairing or replacing an automotive driveshaft is to replace worn or damaged bushings. These bushings are located inside the drive shaft to provide a smooth, safe ride. The shaft rotates in a rubber sleeve. If a bushing needs to be replaced, you should first check the manual for recommendations. Some of these components may also need to be replaced, such as the clutch or swingarm.

This entry was posted in Product Catalog and tagged automatic machine, automatic strapping machine, belt, carton machine, china machine, machine, machine automatic, machine belt, machine carton, machine paper machine, machine semi automatic on July 8, 2022 by ep.

China high quality Dual Drive Table Type CNC Plasma Cutting Machine Metal Cutter with Best Sales

Product Description

Product Description
Different colors can be customized

Dual Drive table type CNC plasma cutting machine cut working process
1. Design drawings you want to cut by AutoCAD,CAXA etc. software , output DXF/DWG format files
2.Input DXF/DWG files to FASTCAM Nesting software(we supply)
3.After nesting , output TXT/NC/G.Code files to U Disk
4.Plug U Disk to Machine Controller , and copy TXT/NC/G.Code files to controller 5. Adjust simple paratems like cutting speed , ARC,then Start cutting

Parameters

power source USA Hper therm 105A power source

system STARFIRE

Nesting Software FASTCAM

Design Software Auto Cad

Gross Power 21.8kw

Cutting Thickness 18mm

Voltage Machine: 220V , Single Phase,Plasma source: 380V , 3 Phase

Cutting Speed 0-4000mm/min

Cutting mode Plasma cutting

Drive Mode Dual Drive Japan Servo motor

Details
power source:USA Hper therm 105A power source,can cut thickness 18mm

control system:STAFIRE,easy to operation

Nesting Software:FASTCAM,save materials and improve utilization

Control cabinet

Samples
Can cut the corners of the plasma cutting machine

Packing and Shipping
Plywood with packaging film

FAQ
1.how i can choose a suitable machine?
Tell us the max working area,the material and its thickness you want to cut,we can help choose the best suitable machine

2.Are you the manufacture?
yes, we are manufacturer, so you can get the factory price directly.don’t need pay some extra agent price for Dual Drive Table CNC Plasma Metal Cutting Machine.

3.Can we visit your factory?
yes, of course , welcome you visit our factory and check our machine quality on spot. after you confirm the coming time , tell me in advance , then we will go to air port or train station to pick you up on time.
And 1 professional engineer will together with you in the factory , any question will be solved on spot at first time.

4.Any benefits can we get if introduce new customer to you ?
Yes , of course , some gifts you will get , and the commission regarding the new customer amount.Steel Tube Cutter Table CNC 1530 Plasma Cutting Machine

5.Can we be your agent?
Welcome , we are looking for Global agent we will help agent improve the market ,and supply all the service like machine technical problem or other after-sales problem, meanwhile ,you can get big discount and commission.

6.Payment terms?
T/T,L/C,Western Union,Paypal,Alibaba Secure Payment ect for tube sheet plasma cutting table.

7. I want to buy this machine,what suggestion can you give?
Please tell me what material do you process? What’s the size of your material?

8.which kind of materials can be processed on this machine ?
Carbon steel , SS , MS, aluminum,Galvanized sheet . etc
1530 plasma c
Our service

Guarantee: 24 months for the whole machine. Within 24 months under normal use and maintenance,any parts broken regarding quality problem, you will get spare part for free. Out of 24 months, you will get spare parts at cost price. You will also get technical support and service all the lifetime

After sales services:Normal machine is properly adjusted before dispatch. You will be CZPT to use the machines immediately. free training advice towards our machine in our factory. You will also get free suggestion and consultation, technical support and service by email/fax/tel and lifetime technical support.

Axle Spindle Types and Features

The axle spindle is an integral part of your vehicle’s suspension. There are several different types and features, including mounting methods, bearings, and functions. Read on for some basic information on axle spindles. The next part of the article will cover how to choose the correct axle spindle for your vehicle. This article will also discuss the different types of spindles available, including the differences between the rear and front bearings.

Features

The improved axle spindle nut assembly is capable of providing additional performance benefits, including increased tire life and reduced seal failure. Its keyway features and radially inwardly extending teeth allow nut adjustment to be accomplished with precision. The invention further provides a unique, multi-piece locking mechanism that minimizes leakage and torque transfer. Its principles and features are detailed in the appended claims. For example, the improved axle spindle nut assembly is designed for use in vehicles that are equipped with a steering system.
The axle spindle nut assembly includes a nut 252 with threads 256 on its inner periphery. The axle spindle 50 also features threads 198 on its outer periphery. The nut is threaded onto the outboard end of the axle spindle 50 until it contacts the inboard surface of the axle spacer 26. In the assembled state, a bearing spacer 58 is also present on the axle spindle.
The axle spindle nut assembly can reduce axial end play between the wheel end assembly 52 and the axle spindle 50. It can be tightened to an extreme torque level, but if the thread faces separate, it will undercompress the bearing cone and spacer group. To minimize these disadvantages, the axle spindle nut assembly is a critical component of a wheel-end assembly. There are several types of axle spindle nuts.
The third embodiment of the axle spindle nut assembly 300 comprises an inner washer 202, an outer washer 310, and at least 1 screw 320. The axle spindle nut assembly 300 secures and preloads bearing cones 55, 57. Unlike the first embodiment, the axle spindle nut assembly 300 uses the inner washer 202, which is optional in the third embodiment. The inner washer 202 and outer washer 310 are similar to those of the first embodiment.

Functions

An axle spindle is 1 of the most important components of a vehicle’s suspension system. The spindle retains the position of bearings and a spacer in an axle by providing clamp force. The inner nut of an axle spindle should be properly torqued to ensure a secure fit. A spindle nut is also responsible for compressing bearings and spacers. If any of these components are missing, the spindle will not work properly.
An axle spindle is used in rear wheel drive cars. It carries the weight of the vehicle on the axle casing and transfers the torque from the differential to the wheels. The axle spindle and hub are secured on the spindle by large nuts. The axle spindle is a vital component of rear wheel drive vehicles. Hence, it is essential to understand the functions of axle spindle. These components are responsible for the smooth operation of a vehicle’s suspension system.
Axle spindles can be mounted in 3 ways: in the typical axle assembly, the spindles are bolted onto the ends of the tubular axle, and the axle is suspended by springs. Short stub-axle mounting uses a torsion beam that flexes to provide a smooth ride. A second washer is used to prevent excessive rotation of the axle spindle.
Apart from being a crucial component of the suspension system, the spindles of the wheels are responsible for guiding the vehicle in a straight line. They are connected to the steering axis and are used in different types of suspension systems. European cars use a MacPherson Strut suspension system in which the spindle is connected to the arms in the front and rear of the suspension frame. The MacPherson strut allows the shock absorber housing to turn the wheel.

Methods of mounting

Various methods of mounting axle spindle are available. In general, these methods involve forming a tubular blank of uniform cross section and thickness, and receiving the bearing assembly against it. The spindle is then secured using a collar, which also serves as a bearing stop. In some cases, additional features are used to provide greater security. Some of these features may not be suitable for all applications. But they are generally suitable.
Axle spindle forming is usually done by progressive steps using hollow punches. The metallic body of the punch has an inner work surface, which receives the axle blank. A mandrel is fixed within the work opening of the punch. The punch body’s work surface forges the spindle about the mandrel. The punch has 2 ends, a closed and an open one.
A wheeled vehicle axle assembly (10) includes a cylindrical housing member (12 a) and a plurality of spindle mounting flanges (30) secured on the housing member. The spindles (16) are firmly attached to the housing member by means of coupling members. The coupling members are configured to distribute the bending loads imposed on the spindle by the axle. It is important to note that the coupling members can be either threaded or screwed.
Traditionally, axle spindles were made from tubular blanks of irregular thickness. This method allowed for a gradual reduction in diameter and eliminated the need for extra metal within the spindle. Similarly, axles made by cold forming eliminate the need for additional metal in the spindle. In this way, the overall cost of manufacture is also reduced. The material used for manufacturing axles also determines the size and shape of the final product.

Bearings

A nut 16 is used to retain the wheel bearings on axle spindle 12. The nut comprises several parts. The first portion includes a plurality of threads and a deformable second portion. The nut may be disposed on the inboard or outboard end of the axle spindle. This type of nut is typically secured to the axle spindle by a retaining nut.
The bearings are installed in the spindle to allow the wheel hub to rotate. While bearings are greased, they can dry out over time. Consequently, you may hear a loud clicking sound when turning your vehicle. Alternatively, you may notice grease on the edges of your tires. Bearing failure can cause severe damage to your axle spindle. If you notice any of these symptoms, you may need to replace the bearings on your axle spindle. Fortunately, you can purchase the necessary bearing parts at O’Reilly Auto Parts.
There are 3 ways to mount an axle spindle. A typical axle assembly has the spindles bolted to the ends of the tubular axle. A torsion beam is also used to mount the spindles on the axle. This torsion beam acts like a spring to help make the ride smooth and bump-free. Lastly, the axle spindle is sometimes mounted as a bolt-on component.

Cost

If your axle spindle has been damaged, you may need to have it replaced. This part of the axle is relatively easy to replace, but you need to know how to do it correctly. To replace your axle spindle, you must first remove the damaged one. To do this, a technician will cut the weld. They will then thread the new 1 into the axle tube and torque it to specification. After that, they will weld the new axle spindle into place.
When you are thinking about the cost of an axle spindle replacement, you must first determine if it is worth it for your vehicle. It is generally a good idea to replace the spindle only if it is causing damage to your vehicle. You can also replace your axle housing if it is deteriorating. If you do not replace the spindle, you can risk damaging the axle housing. To save money, you can consider using a repair kit.
You can also purchase an axle nut socket set. Most wrenches have an adjusting socket for this purpose. The socket set should be suitable for most vehicle types. Axle spindle replacement costs around $500 to $600 before tax. However, you should be aware that these costs vary widely based on the type of vehicle you have. The parts can cost between $430 and $480, and the labor can cost anywhere from $50 to 70.

This entry was posted in Product Catalog and tagged china machine, cnc machine, cnc plasma cutting machine, cnc plasma machine, cutter machine, cutting machine, machine, machine cutter, machine cutting, metal cnc machine, metal cutting machine, metal machine, plasma cnc cutting machine, plasma cutting machine on July 8, 2022 by ep.

China supplier Ultrasonic Surgical Disposable Face Mask Machine with Drive Servo System near me shop

Product Description

Product Description

Product Description

Product Name

1+1 Mini Mask Machine

Certification

CE SGS ISO

Qualification Rate

98-99%

Equipment Efficiency

100-120pcs/min

Mask Specification

175*95mm/145*95mm

Equipment size

L:6100*W2850*H2100mm

Voltage

Single phase 220V 60HZ/50HZ

MOQ

1PCS

Machinery Test Report

Provied

Logo

Accept customization

ODM/OEM

Accept

Sample

A box of products produced by the mask machine

Lead time

5-7 days

Supply Ability

300 Sets Per/Month

Our Advantages

Why you should choose us?

1. We,Gosunm,has acquired the ISO9001 confirmation and SGS confirmation by gaozhen8888 . And our machines are all qualified with CE certificates and EU certificates.

2.We are cooperating with some reputed medical corporations such as Watsons, BYD, SanQi, Winner, and so on. And our machines are also welcomed in over 30 overseas countries. With these machines’ producing masks in our clients’ factories, our clients say highly of ou machines by comparing to the machines from other suppliers.

3.Our essential strong points:
a.Machine with high quality, company with timely inovation, components with genuine article, operation with longevity, performace with excellence, and production with superity.
b.Aftersales services is also available 24 hours because there is a engineer team and enough spare parts always standby.

Click For More Information

Service Guarantee

1. Free product warranty for one year.
2. A pack of wearing parts is provided for free.
3. Provide English installation instructions and circuit diagrams.
4. Provide complete installation video guidance and parts assembly video, multi-language explanation.
5. In some countries, there are cooperative agents that provide spare parts warehouses and provide long-term service sales.
6. A remote guidance sales service team to provide 24-hour online guidance services for engineers.

Customer Feedback

Certificate

Company Profile

GOSUNM MACHINERY

       ZheJiang Gosunm Intelligent Industry Co., Ltd is located in HangZhou, the most economically dynamic international manufacturing city in South China. It was estab-lished in 2012 with a registered capital of 10 million. It has a modern factory building of more than 15,000 square meters and more than 200 main employees.

Exhibition & Business Partner

Packaging & Shipping

FAQ

1.Q: Are you a factory or trading company?
A: We are a factory which license of import & export.

2.Q: Where is your factory located? How can I visit there?
A: Our factory is located in HangZhou City,ZheJiang province China.
The nearest airport is HangZhou airport(30mins driving).
We would like to pick up you in that airport. Welcome to visit us!

3.Q: How long is the warranty period ?
A: Perfect after-sales service, one year machine warranty, free replacement of accessories.

4.Q: How about the installation? Do you have after-sale service?
A: We will send professional technician to your company to install the machine and train your staff until they could operate the machine independently.

5.Q:How long we will get the machine?
A: Delivery time up machine machine model, standard machine normally can shipping out within 10days, special machine up to our PI confirmed delivery date. And after shipping you just need wait the ship container arrived to you.

6.Q: Why should we choose your company?
>Certified company with CE certificates.
>Machinery and equipment professional manufacturer for 13 years, with more than 130 advanced patents.
>Chinese, English, and Korean languages manual, and we provide a complete machine assemble video. After-sales engineers are available at 24 hours on line.
>The machines are sold overseas and we have agencies in many countries, which can provide on-site installation, commissioning and maintenance services.

The Four Basic Components of a Screw Shaft

There are 4 basic components of a screw shaft: the Head, the Thread angle, and the Threaded shank. These components determine the length, shape, and quality of a screw. Understanding how these components work together can make purchasing screws easier. This article will cover these important factors and more. Once you know these, you can select the right type of screw for your project. If you need help choosing the correct type of screw, contact a qualified screw dealer.

Thread angle

The angle of a thread on a screw shaft is the difference between the 2 sides of the thread. Threads that are unified have a 60 degree angle. Screws have 2 parts: a major diameter, also known as the screw’s outside diameter, and a minor diameter, or the screw’s root diameter. A screw or nut has a major diameter and a minor diameter. Each has its own angle, but they all have 1 thing in common – the angle of thread is measured perpendicularly to the screw’s axis.
The pitch of a screw depends on the helix angle of the thread. In a single-start screw, the lead is equal to the pitch, and the thread angle of a multiple-start screw is based on the number of starts. Alternatively, you can use a square-threaded screw. Its square thread minimizes the contact surface between the nut and the screw, which improves efficiency and performance. A square thread requires fewer motors to transfer the same load, making it a good choice for heavy-duty applications.
A screw thread has 4 components. First, there is the pitch. This is the distance between the top and bottom surface of a nut. This is the distance the thread travels in a full revolution of the screw. Next, there is the pitch surface, which is the imaginary cylinder formed by the average of the crest and root height of each tooth. Next, there is the pitch angle, which is the angle between the pitch surface and the gear axis.

Head

There are 3 types of head for screws: flat, round, and hexagonal. They are used in industrial applications and have a flat outer face and a conical interior. Some varieties have a tamper-resistant pin in the head. These are usually used in the fabrication of bicycle parts. Some are lightweight, and can be easily carried from 1 place to another. This article will explain what each type of head is used for, and how to choose the right 1 for your screw.
The major diameter is the largest diameter of the thread. This is the distance between the crest and the root of the thread. The minor diameter is the smaller diameter and is the distance between the major and minor diameters. The minor diameter is half the major diameter. The major diameter is the upper surface of the thread. The minor diameter corresponds to the lower extreme of the thread. The thread angle is proportional to the distance between the major and minor diameters.
Lead screws are a more affordable option. They are easier to manufacture and less expensive than ball screws. They are also more efficient in vertical applications and low-speed operations. Some types of lead screws are also self-locking, and have a high coefficient of friction. Lead screws also have fewer parts. These types of screw shafts are available in various sizes and shapes. If you’re wondering which type of head of screw shaft to buy, this article is for you.

Threaded shank

Wood screws are made up of 2 parts: the head and the shank. The shank is not threaded all the way up. It is only partially threaded and contains the drive. This makes them less likely to overheat. Heads on wood screws include Oval, Round, Hex, Modified Truss, and Flat. Some of these are considered the “top” of the screw.
Screws come in many sizes and thread pitches. An M8 screw has a 1.25-mm thread pitch. The pitch indicates the distance between 2 identical threads. A pitch of 1 is greater than the other. The other is smaller and coarse. In most cases, the pitch of a screw is indicated by the letter M followed by the diameter in millimetres. Unless otherwise stated, the pitch of a screw is greater than its diameter.
Generally, the shank diameter is smaller than the head diameter. A nut with a drilled shank is commonly used. Moreover, a cotter pin nut is similar to a castle nut. Internal threads are usually created using a special tap for very hard metals. This tap must be followed by a regular tap. Slotted machine screws are usually sold packaged with nuts. Lastly, studs are often used in automotive and machine applications.
In general, screws with a metric thread are more difficult to install and remove. Fortunately, there are many different types of screw threads, which make replacing screws a breeze. In addition to these different sizes, many of these screws have safety wire holes to keep them from falling. These are just some of the differences between threaded screw and non-threaded. There are many different types of screw threads, and choosing the right 1 will depend on your needs and your budget.

Point

There are 3 types of screw heads with points: cone, oval, and half-dog. Each point is designed for a particular application, which determines its shape and tip. For screw applications, cone, oval, and half-dog points are common. Full dog points are not common, and they are available in a limited number of sizes and lengths. According to ASTM standards, point penetration contributes as much as 15% of the total holding power of the screw, but a cone-shaped point may be more preferred in some circumstances.
There are several types of set screws, each with its own advantage. Flat-head screws reduce indentation and frequent adjustment. Dog-point screws help maintain a secure grip by securing the collar to the screw shaft. Cup-point set screws, on the other hand, provide a slip-resistant connection. The diameter of a cup-point screw is usually half of its shaft diameter. If the screw is too small, it may slack and cause the screw collar to slip.
The UNF series has a larger area for tensile stress than coarse threads and is less prone to stripping. It’s used for external threads, limited engagement, and thinner walls. When using a UNF, always use a standard tap before a specialized tap. For example, a screw with a UNF point is the same size as a type C screw but with a shorter length.

Spacer

A spacer is an insulating material that sits between 2 parts and centers the shaft of a screw or other fastener. Spacers come in different sizes and shapes. Some of them are made of Teflon, which is thin and has a low coefficient of friction. Other materials used for spacers include steel, which is durable and works well in many applications. Plastic spacers are available in various thicknesses, ranging from 4.6 to 8 mm. They’re suitable for mounting gears and other items that require less contact surface.
These devices are used for precision fastening applications and are essential fastener accessories. They create clearance gaps between the 2 joined surfaces or components and enable the screw or bolt to be torqued correctly. Here’s a quick guide to help you choose the right spacer for the job. There are many different spacers available, and you should never be without one. All you need is a little research and common sense. And once you’re satisfied with your purchase, you can make a more informed decision.
A spacer is a component that allows the components to be spaced appropriately along a screw shaft. This tool is used to keep space between 2 objects, such as the spinning wheel and an adjacent metal structure. It also helps ensure that a competition game piece doesn’t rub against an adjacent metal structure. In addition to its common use, spacers can be used in many different situations. The next time you need a spacer, remember to check that the hole in your screw is threaded.

Nut

A nut is a simple device used to secure a screw shaft. The nut is fixed on each end of the screw shaft and rotates along its length. The nut is rotated by a motor, usually a stepper motor, which uses beam coupling to accommodate misalignments in the high-speed movement of the screw. Nuts are used to secure screw shafts to machined parts, and also to mount bearings on adapter sleeves and withdrawal sleeves.
There are several types of nut for screw shafts. Some have radial anti-backlash properties, which prevent unwanted radial clearances. In addition, they are designed to compensate for thread wear. Several nut styles are available, including anti-backlash radial nuts, which have a spring that pushes down on the nut’s flexible fingers. Axial anti-backlash nuts also provide thread-locking properties.
To install a ball nut, you must first align the tangs of the ball and nut. Then, you must place the adjusting nut on the shaft and tighten it against the spacer and spring washer. Then, you need to lubricate the threads, the ball grooves, and the spring washers. Once you’ve installed the nut, you can now install the ball screw assembly.
A nut for screw shaft can be made with either a ball or a socket. These types differ from hex nuts in that they don’t need end support bearings, and are rigidly mounted at the ends. These screws can also have internal cooling mechanisms to improve rigidity. In this way, they are easier to tension than rotating screws. You can also buy hollow stationary screws for rotator nut assemblies. This type is great for applications requiring high heat and wide temperature changes, but you should be sure to follow the manufacturer’s instructions.

This entry was posted in Product Catalog and tagged china machine, face machine, face mask machine, machine, machine mask, machine shop, mask machine, surgical machine, surgical mask machine, ultrasonic machine on July 8, 2022 by ep.

China Custom Steel Metal Reduction Starter Shaft Spline Pinion Custom Precision Machine Wheel Transmission Planetary Sun Drive Spur Gear Wholesale Mechanical Parts with Best Sales

Product Description

ZheJiang E-Rally Technology Co., Ltd. is 1 of most experienced professional rapid prototype and mass production manufacturer. Located in ZheJiang China.
          Our market focus is to supply the professional machining solution for micro precision parts, Auto Spare Parts, Especially Semiconductor equipment parts, Environmental protection equipment parts, Testing equipment parts, And other kinds of high precision parts manufacturing. We don’t only provide OEM services, we can also provide you with the professional technical support and best production plan of equipment and parts.
         We specialize in rapid prototyping, rapid tooling, low volume and mass production manufacturing of custom parts. We produce over 10,000 kinds of parts every year, with rich processing experience, we can make everything into reality. Short lead time, 24-hour response, full steps QC inspection, Non-disclosure agreement is strictly respected.
         Please feel free to contact us.

Cooperate with us You Will Get:

* Competitive Price Of CNC Precision Machinery part

* Good Quality Assurance

* In Time Sampling & In Time Shipment

* Quality Guarantee

* Free Sample Can Be Provided Some Time

* Low MOQ

* Reply in 24 hours and fast quotaion

How to work with us?

1. Send us your 3D drawing (STEP/IGS/SolidWorks format etc. ) so we can check all dimension to quote.

2. Expatiate your requirements (your quantity, material, and surface finish requirements, etc.) to our email

Drawing Format Can Done By E-Rally?

dwg, dxf, prt, iGS, step, stp, iges, slprt, asm, x_t files are all accepted.

What kinds of CNC machining product is suitable to send to E-Rally for quoation?

CNC machining product, CNC milling product, CNC lathing product, CNC turning product, CNC precision machining product, maching product, precision product and all machining parts used in different industrials such as: spray nozzle, car accessories, railway accessories, bathroom accessoires, equipemnt spare parts, pipe and fittings and so on.

Product Description

Steel Metal Reduction Starter Shaft Spline Pinion Custom Precision Machine Wheel Transmission Planetary Sun Drive Spur Gear

Item Customized machined machining gears

Process CNC machining,CNC milling, cnc lathe machining

material steel, stainless steel, carbon steel,brass,C360 brass copper, aluminum 7075,7068 brass,C360 brass copper, aluminum Nylon, PA66, NYLON , ABS, PP,PC,PE,POM,PVC,PU,TPR,TPE,TPU,PA,PET,HDPE,PMMA etc

Quality Control ISO9001 and ISO14001

Dimension bore tolerances -/+0.01mm

Quality standard AGMA, JIS, DIN

Surface treatment Blackening, plated, anodizing, hard anodizing etc

Gear hardness 30 to 60 H.R.C

Size/Color Gears and parts dimensions are according to drawings from customer, and colors are customized

Surface treatment Polished or matte surface, painting, texture, vacuum aluminizing and can be stamped with logo etc.

Dimensions Tolerance ±0.01mm or more precise

Samples confirmation and approval samples shipped for confirmation and shipping cost paid by customers

Package Inner clear plastic bag/outside carton/wooden pallets/ or any other special package as per customer’s requirements.

Delivery Time Total takes 2~~8weeks usually

Shipping

Usual FEDEX, UPS, DHL, TNT, EMS or base on customer’s requirement.

High precision custom mold / Injection CZPT / Mold accessories

Machinable materials

Steel 1018 Stainless Steel 17-4PH Copper/Brass 110

1045 302 145

1050 303 147

1117 304 314

1141 316 316

1144 321 360

11L17 409 544

11L41 410 624

1215 416 Beryllium Copper

12L14 420 Plastics ABS

4140 430 PC

4142 440 PP

41L40 Aluminum 2011 PEEK

41L42 2571 PET

8620 5052 PUM

86L20 6061 PVC

E52100 6063 Delron

Fatigue proof 6082 Nylon

Stress proof 6262 Te/flon

Customized 7075 Celcon

Steel Aluminum Copper/Brass Plastics

Previous Cases

CNC Machining CNC Turning Motorcycles Parts Mould Laser Cutting Stamping Parts

☆☆☆☆☆
All the pictures are actually taken by rally. Every year, more than 10,000 kinds of parts are manufactured, involving many industries:

Medical equipment Semiconductor equipment 5g communication equipment Packaging equipment Intelligent assembly

Logistics Delivery

FAQ

1. Are you a trader or a manufacturer?
KTS:We are manufacturer, our factory is located in HangZhou, ZheJiang Province, China, The starting point of HangZhou Europe Railway, Welcome to visit our factory.

2. May i order small quantity of CNC mashinery parts or carbide products?
KTS:We support small batch customization, but different models have different MOQ, please contact US to confirm.

3.Can you provide sample?

KTS: Yes, please feel free to tell us, also your own design is welcome to make sample for you, After confirming the authenticity of your company, we are willing to provide small quantities of free samples.

4.What is your price term, payment term and delivery terms?
Price Terms: By FOB ZheJiang or other port. Balance before shipment. Rail transport is also allowed.
Payment Terms: T/T advance.
Delivery Terms: By express, by air, by train, by shipment or as requirement

Contact us:


ZheJiang E-Rally supply Chain Machinery Co.,Ltd.
Address: No.1, floor 1, building 1, No.26 Xixin Avenue, high tech Zone, HangZhou, ZheJiang , China

If there’s anything we can help, please feel free to contact with us.
We’re sure your any inquiry or requirement will get prompt attention.

What is a drive shaft?

If you notice a clicking noise while driving, it is most likely the driveshaft. An experienced auto mechanic will be able to tell you if the noise is coming from both sides or from 1 side. If it only happens on 1 side, you should check it. If you notice noise on both sides, you should contact a mechanic. In either case, a replacement driveshaft should be easy to find.

The drive shaft is a mechanical part

A driveshaft is a mechanical device that transmits rotation and torque from the engine to the wheels of the vehicle. This component is essential to the operation of any driveline, as the mechanical power from the engine is transmitted to the PTO (power take-off) shaft, which hydraulically transmits that power to connected equipment. Different drive shafts contain different combinations of joints to compensate for changes in shaft length and angle. Some types of drive shafts include connecting shafts, internal constant velocity joints, and external fixed joints. They also contain anti-lock system rings and torsional dampers to prevent overloading the axle or causing the wheels to lock.
Although driveshafts are relatively light, they need to handle a lot of torque. Torque applied to the drive shaft produces torsional and shear stresses. Because they have to withstand torque, these shafts are designed to be lightweight and have little inertia or weight. Therefore, they usually have a joint, coupling or rod between the 2 parts. Components can also be bent to accommodate changes in the distance between them.
The drive shaft can be made from a variety of materials. The most common material for these components is steel, although alloy steels are often used for high-strength applications. Alloy steel, chromium or vanadium are other materials that can be used. The type of material used depends on the application and size of the component. In many cases, metal driveshafts are the most durable and cheapest option. Plastic shafts are used for light duty applications and have different torque levels than metal shafts.

It transfers power from the engine to the wheels

A car’s powertrain consists of an electric motor, transmission, and differential. Each section performs a specific job. In a rear-wheel drive vehicle, the power generated by the engine is transmitted to the rear tires. This arrangement improves braking and handling. The differential controls how much power each wheel receives. The torque of the engine is transferred to the wheels according to its speed.
The transmission transfers power from the engine to the wheels. It is also called “transgender”. Its job is to ensure power is delivered to the wheels. Electric cars cannot drive themselves and require a gearbox to drive forward. It also controls how much power reaches the wheels at any given moment. The transmission is the last part of the power transmission chain. Despite its many names, the transmission is the most complex component of a car’s powertrain.
The driveshaft is a long steel tube that transmits mechanical power from the transmission to the wheels. Cardan joints connect to the drive shaft and provide flexible pivot points. The differential assembly is mounted on the drive shaft, allowing the wheels to turn at different speeds. The differential allows the wheels to turn at different speeds and is very important when cornering. Axles are also important to the performance of the car.

It has a rubber boot that protects it from dust and moisture

To keep this boot in good condition, you should clean it with cold water and a rag. Never place it in the dryer or in direct sunlight. Heat can deteriorate the rubber and cause it to shrink or crack. To prolong the life of your rubber boots, apply rubber conditioner to them regularly. Indigenous peoples in the Amazon region collect latex sap from the bark of rubber trees. Then they put their feet on the fire to solidify the sap.

it has a U-shaped connector

The drive shaft has a U-joint that transfers rotational energy from the engine to the axle. Defective gimbal joints can cause vibrations when the vehicle is in motion. This vibration is often mistaken for a wheel balance problem. Wheel balance problems can cause the vehicle to vibrate while driving, while a U-joint failure can cause the vehicle to vibrate when decelerating and accelerating, and stop when the vehicle is stopped.
The drive shaft is connected to the transmission and differential using a U-joint. It allows for small changes in position between the 2 components. This prevents the differential and transmission from remaining perfectly aligned. The U-joint also allows the drive shaft to be connected unconstrained, allowing the vehicle to move. Its main purpose is to transmit electricity. Of all types of elastic couplings, U-joints are the oldest.
Your vehicle’s U-joints should be inspected at least twice a year, and the joints should be greased. When checking the U-joint, you should hear a dull sound when changing gears. A clicking sound indicates insufficient grease in the bearing. If you hear or feel vibrations when shifting gears, you may need to service the bearings to prolong their life.

it has a slide-in tube

The telescopic design is a modern alternative to traditional driveshaft designs. This innovative design is based on an unconventional design philosophy that combines advances in material science and manufacturing processes. Therefore, they are more efficient and lighter than conventional designs. Slide-in tubes are a simple and efficient design solution for any vehicle application. Here are some of its benefits. Read on to learn why this type of shaft is ideal for many applications.
The telescopic drive shaft is an important part of the traditional automobile transmission system. These driveshafts allow linear motion of the 2 components, transmitting torque and rotation throughout the vehicle’s driveline. They also absorb energy if the vehicle collides. Often referred to as foldable driveshafts, their popularity is directly dependent on the evolution of the automotive industry.

It uses a bearing press to replace worn or damaged U-joints

A bearing press is a device that uses a rotary press mechanism to install or remove worn or damaged U-joints from a drive shaft. With this tool, you can replace worn or damaged U-joints in your car with relative ease. The first step involves placing the drive shaft in the vise. Then, use the 11/16″ socket to press the other cup in far enough to install the clips. If the cups don’t fit, you can use a bearing press to remove them and repeat the process. After removing the U-joint, use a grease nipple Make sure the new grease nipple is installed correctly.
Worn or damaged U-joints are a major source of driveshaft failure. If 1 of them were damaged or damaged, the entire driveshaft could dislocate and the car would lose power. Unless you have a professional mechanic doing the repairs, you will have to replace the entire driveshaft. Fortunately, there are many ways to do this yourself.
If any of these warning signs appear on your vehicle, you should consider replacing the damaged or worn U-joint. Common symptoms of damaged U-joints include rattling or periodic squeaking when moving, rattling when shifting, wobbling when turning, or rusted oil seals. If you notice any of these symptoms, take your vehicle to a qualified mechanic for a full inspection. Neglecting to replace a worn or damaged u-joint on the driveshaft can result in expensive and dangerous repairs and can cause significant damage to your vehicle.

This entry was posted in Product Catalog and tagged best gear, china machine, custom gear, custom machine, custom shaft, drive gear, gear, gear best, gear custom, gear drive, gear machine, gear mechanical, gear parts, gear reduction, gear shaft, gear shaft starter, gear transmission, gear wheel, gear wheel shaft, gear wheel spur, machine, machine shaft, mechanical gear, metal gear, metal gear metal gear, metal machine, metal shaft, parts gear, parts planetary gear, parts shaft, pinion, pinion gear, pinion gear shaft, pinion shaft, pinion spur gear, planetary drive, planetary gear, planetary gear drive, planetary gear reduction, planetary gear transmission, planetary gear with pinion shaft, planetary pinion shaft, planetary reduction, planetary reduction drive, planetary transmission, planetary wheel drive, precision gear, precision shaft, reduction gear, shaft, shaft drive, shaft gear, shaft steel, shaft wheel, spline shaft, spur gear, starter drive shaft, starter gear, starter gear shaft, starter planetary shaft, steel machine, steel shaft, sun gear, transmission gear, transmission shaft, wheel gear on July 8, 2022 by ep.

China OEM High Speed Servo Engine Drive Roof Tile Making Machine Wall Cladding Roll Former. with high quality

Product Description

IBR roofing sheet high quality colored steel trapezoidal roll forming machine

↓↓↓↓↓↓Click here to get in touch with us↓↓↓↓↓↓

product specification

1. The advantage of roof color steel metal sheet roll forming machine china manufacturer

It has reasinable structure, beautiful appearance, with advantage of saving space, easy operate and especially welcomed by the costomer with limit area or site operation.

2. Main Parameter and specification of the roof color steel metal sheet roll forming machine china manufacturer

We design each machine according to user requirement. Below techinical parameters can be adjusted if needed.

name
C35-type high quality colored steel trapezoidal roll forming machine

roller station

19 roller stations or as customer requirement

roller diameters

80mm

size of machine

10*1.65*1.45m

weight

about 7 tons

main motor

5.5kw

voltage 380v

feeding Width 1250mm

roller Material 45#Steel

production Speed 10-16m/min

rolling Thinckness 0.3-0.8mm

control Sysem PLC Automatic Control

after Warranty Service Video technical support

effictive width 1000mm

    This set of schemes are not only high value, but also the configuration is superior, and the whole process is automated.

packing and shipping

↓↓↓↓↓↓Click here to get in touch with us↓↓↓↓↓↓

Industry accessories: Color steel coil +handheld electric scissors
Our company also sells related industry accessories, if you need to get in touch with us.

FAQ

1:How to play order:
Inquiry—confirm the profile drawings and price—-confirm the PI—arrange the deposit or L/C—then OK
2:How to visit our company:
Fly to ZheJiang airport:By high speed train From ZheJiang Nan to HangZhou Xi (1 hour),then we can
pick up you.
Fly to ZheJiang Airport: By high speed train From ZheJiang Xihu (West Lake) Dis.ao  to HangZhou Xi(4.5 hours),then we can pick up you.
3:When we exported the machines:
We have beening making and exporting the machines since from the year of 1998.
4.What’s the after- sale service:
we sent technician to your country to fix the machine.The buyer should bear all the cost including:
visa, round trip ticket and suitable accommodation, also buyer should pay the salary 80USD/day.
5.How about the warranty: 12 months limits warranty.

Calculating the Deflection of a Worm Shaft

In this article, we’ll discuss how to calculate the deflection of a worm gear’s worm shaft. We’ll also discuss the characteristics of a worm gear, including its tooth forces. And we’ll cover the important characteristics of a worm gear. Read on to learn more! Here are some things to consider before purchasing a worm gear. We hope you enjoy learning! After reading this article, you’ll be well-equipped to choose a worm gear to match your needs.

Calculation of worm shaft deflection

The main goal of the calculations is to determine the deflection of a worm. Worms are used to turn gears and mechanical devices. This type of transmission uses a worm. The worm diameter and the number of teeth are inputted into the calculation gradually. Then, a table with proper solutions is shown on the screen. After completing the table, you can then move on to the main calculation. You can change the strength parameters as well.
The maximum worm shaft deflection is calculated using the finite element method (FEM). The model has many parameters, including the size of the elements and boundary conditions. The results from these simulations are compared to the corresponding analytical values to calculate the maximum deflection. The result is a table that displays the maximum worm shaft deflection. The tables can be downloaded below. You can also find more information about the different deflection formulas and their applications.
The calculation method used by DIN EN 10084 is based on the hardened cemented worm of 16MnCr5. Then, you can use DIN EN 10084 (CuSn12Ni2-C-GZ) and DIN EN 1982 (CuAl10Fe5Ne5-C-GZ). Then, you can enter the worm face width, either manually or using the auto-suggest option.
Common methods for the calculation of worm shaft deflection provide a good approximation of deflection but do not account for geometric modifications on the worm. While Norgauer’s 2021 approach addresses these issues, it fails to account for the helical winding of the worm teeth and overestimates the stiffening effect of gearing. More sophisticated approaches are required for the efficient design of thin worm shafts.
Worm gears have a low noise and vibration compared to other types of mechanical devices. However, worm gears are often limited by the amount of wear that occurs on the softer worm wheel. Worm shaft deflection is a significant influencing factor for noise and wear. The calculation method for worm gear deflection is available in ISO/TR 14521, DIN 3996, and AGMA 6022.
The worm gear can be designed with a precise transmission ratio. The calculation involves dividing the transmission ratio between more stages in a gearbox. Power transmission input parameters affect the gearing properties, as well as the material of the worm/gear. To achieve a better efficiency, the worm/gear material should match the conditions that are to be experienced. The worm gear can be a self-locking transmission.
The worm gearbox contains several machine elements. The main contributors to the total power loss are the axial loads and bearing losses on the worm shaft. Hence, different bearing configurations are studied. One type includes locating/non-locating bearing arrangements. The other is tapered roller bearings. The worm gear drives are considered when locating versus non-locating bearings. The analysis of worm gear drives is also an investigation of the X-arrangement and four-point contact bearings.

Influence of tooth forces on bending stiffness of a worm gear

The bending stiffness of a worm gear is dependent on tooth forces. Tooth forces increase as the power density increases, but this also leads to increased worm shaft deflection. The resulting deflection can affect efficiency, wear load capacity, and NVH behavior. Continuous improvements in bronze materials, lubricants, and manufacturing quality have enabled worm gear manufacturers to produce increasingly high power densities.
Standardized calculation methods take into account the supporting effect of the toothing on the worm shaft. However, overhung worm gears are not included in the calculation. In addition, the toothing area is not taken into account unless the shaft is designed next to the worm gear. Similarly, the root diameter is treated as the equivalent bending diameter, but this ignores the supporting effect of the worm toothing.
A generalized formula is provided to estimate the STE contribution to vibratory excitation. The results are applicable to any gear with a meshing pattern. It is recommended that engineers test different meshing methods to obtain more accurate results. One way to test tooth-meshing surfaces is to use a finite element stress and mesh subprogram. This software will measure tooth-bending stresses under dynamic loads.
The effect of tooth-brushing and lubricant on bending stiffness can be achieved by increasing the pressure angle of the worm pair. This can reduce tooth bending stresses in the worm gear. A further method is to add a load-loaded tooth-contact analysis (CCTA). This is also used to analyze mismatched ZC1 worm drive. The results obtained with the technique have been widely applied to various types of gearing.
In this study, we found that the ring gear’s bending stiffness is highly influenced by the teeth. The chamfered root of the ring gear is larger than the slot width. Thus, the ring gear’s bending stiffness varies with its tooth width, which increases with the ring wall thickness. Furthermore, a variation in the ring wall thickness of the worm gear causes a greater deviation from the design specification.
To understand the impact of the teeth on the bending stiffness of a worm gear, it is important to know the root shape. Involute teeth are susceptible to bending stress and can break under extreme conditions. A tooth-breakage analysis can control this by determining the root shape and the bending stiffness. The optimization of the root shape directly on the final gear minimizes the bending stress in the involute teeth.
The influence of tooth forces on the bending stiffness of a worm gear was investigated using the CZPT Spiral Bevel Gear Test Facility. In this study, multiple teeth of a spiral bevel pinion were instrumented with strain gages and tested at speeds ranging from static to 14400 RPM. The tests were performed with power levels as high as 540 kW. The results obtained were compared with the analysis of a three-dimensional finite element model.

Characteristics of worm gears

Worm gears are unique types of gears. They feature a variety of characteristics and applications. This article will examine the characteristics and benefits of worm gears. Then, we’ll examine the common applications of worm gears. Let’s take a look! Before we dive in to worm gears, let’s review their capabilities. Hopefully, you’ll see how versatile these gears are.
A worm gear can achieve massive reduction ratios with little effort. By adding circumference to the wheel, the worm can greatly increase its torque and decrease its speed. Conventional gearsets require multiple reductions to achieve the same reduction ratio. Worm gears have fewer moving parts, so there are fewer places for failure. However, they can’t reverse the direction of power. This is because the friction between the worm and wheel makes it impossible to move the worm backwards.
Worm gears are widely used in elevators, hoists, and lifts. They are particularly useful in applications where stopping speed is critical. They can be incorporated with smaller brakes to ensure safety, but shouldn’t be relied upon as a primary braking system. Generally, they are self-locking, so they are a good choice for many applications. They also have many benefits, including increased efficiency and safety.
Worm gears are designed to achieve a specific reduction ratio. They are typically arranged between the input and output shafts of a motor and a load. The 2 shafts are often positioned at an angle that ensures proper alignment. Worm gear gears have a center spacing of a frame size. The center spacing of the gear and worm shaft determines the axial pitch. For instance, if the gearsets are set at a radial distance, a smaller outer diameter is necessary.
Worm gears’ sliding contact reduces efficiency. But it also ensures quiet operation. The sliding action limits the efficiency of worm gears to 30% to 50%. A few techniques are introduced herein to minimize friction and to produce good entrance and exit gaps. You’ll soon see why they’re such a versatile choice for your needs! So, if you’re considering purchasing a worm gear, make sure you read this article to learn more about its characteristics!
An embodiment of a worm gear is described in FIGS. 19 and 20. An alternate embodiment of the system uses a single motor and a single worm 153. The worm 153 turns a gear which drives an arm 152. The arm 152, in turn, moves the lens/mirr assembly 10 by varying the elevation angle. The motor control unit 114 then tracks the elevation angle of the lens/mirr assembly 10 in relation to the reference position.
The worm wheel and worm are both made of metal. However, the brass worm and wheel are made of brass, which is a yellow metal. Their lubricant selections are more flexible, but they’re limited by additive restrictions due to their yellow metal. Plastic on metal worm gears are generally found in light load applications. The lubricant used depends on the type of plastic, as many types of plastics react to hydrocarbons found in regular lubricant. For this reason, you need a non-reactive lubricant.

This entry was posted in Product Catalog and tagged china machine, china making machine, machine, machine roll, making machine, roll making machine, roof machine, roof tile making machine, tile making machine on July 8, 2022 by ep.

China best H5 Safety HDD Hard Disk Drive USB CD Shredder Machine for Sale with Best Sales

Product Description

Hard Disk Drive Shredder

Product Description

The hard disk / hard drive shredder adopts special steel and is suitable for shred desktop 3.5 inch ,laptop 2.5 inch and 1.8 inch hard disk, It is the new designed especially for shredding all kind of hard disk / hard drive,it`s perfect for office and data destruction. Each rotary knife has 4 cutting edges, you can continue to use it after 90° rotation when it wear. Each stator knife has 4 cutting edges, you can continue to use it after 180° rotation when it wear. The wheel gear reduce drive the main shaft, it has the advantages of stable running lower noise and big torque. PLC control system and positive and negative rotation as well as the emergency stop can ensure the machine working safely and stably.

Product Parameters

Model
Rotate speed(r/m)

feeding size (mm)

Output size (mm)

Capacity (pcs/h)

Overall size(mm)

Blades

MX-200 16
170×140

below 20

100-200

845x550x1005

5pcs ¢165*55*20

MX-300 16
140×115

below 20

180-240

845x550x1005

8pcs ¢165*55*20

FAQ

Q: What is your company’s guarantee policy ?
A: All our products come with 1 year warranty.

Q: I want to buy a plant of your machine,but I do not know how to install them and how to
run the entire line .could you help me ?
A:Our senior engineer will make a project drawing for your reference first.
The drawing will point out the machine size/space cost. even the worker numbers suggestion.
Our engineer will CZPT you install the machine personally.

Q: What can I do if the machine can not work?
A: We appreciate that if you can send us a video to show the machine situation .
Our engineer will try to find out the problem and reply you soon. if it can not be solved through our guidance. Our engineer will come to your country and fix the problem personally.
(If the machine was broken intentionally. Sorry we will not provide the above services )

Q: The local environmental law is very strict. Can your machine match it?
A: Sure.All our machine had pass the CE/SGS certification

Q: How I go to visit your factory?
A: Our factory located at Xihu (West Lake) Dis. County,HangZhou city,ZheJiang Province. We have an office in HangZhou city .We suggest you go to HangZhou city first by plane or railway. We will pick you up and go to factory directly

Q:My employees are not skilled at operating such machine,can you help to train them?
A: Sure.That is no problem.

Analytical Approaches to Estimating Contact Pressures in Spline Couplings

A spline coupling is a type of mechanical connection between 2 rotating shafts. It consists of 2 parts – a coupler and a coupling. Both parts have teeth which engage and transfer loads. However, spline couplings are typically over-dimensioned, which makes them susceptible to fatigue and static behavior. Wear phenomena can also cause the coupling to fail. For this reason, proper spline coupling design is essential for achieving optimum performance.

Modeling a spline coupling

Spline couplings are becoming increasingly popular in the aerospace industry, but they operate in a slightly misaligned state, causing both vibrations and damage to the contact surfaces. To solve this problem, this article offers analytical approaches for estimating the contact pressures in a spline coupling. Specifically, this article compares analytical approaches with pure numerical approaches to demonstrate the benefits of an analytical approach.
To model a spline coupling, first you create the knowledge base for the spline coupling. The knowledge base includes a large number of possible specification values, which are related to each other. If you modify 1 specification, it may lead to a warning for violating another. To make the design valid, you must create a spline coupling model that meets the specified specification values.
After you have modeled the geometry, you must enter the contact pressures of the 2 spline couplings. Then, you need to determine the position of the pitch circle of the spline. In Figure 2, the centre of the male coupling is superposed to that of the female spline. Then, you need to make sure that the alignment meshing distance of the 2 splines is the same.
Once you have the data you need to create a spline coupling model, you can begin by entering the specifications for the interface design. Once you have this data, you need to choose whether to optimize the internal spline or the external spline. You’ll also need to specify the tooth friction coefficient, which is used to determine the stresses in the spline coupling model 20. You should also enter the pilot clearance, which is the clearance between the tip 186 of a tooth 32 on 1 spline and the feature on the mating spline.
After you have entered the desired specifications for the external spline, you can enter the parameters for the internal spline. For example, you can enter the outer diameter limit 154 of the major snap 54 and the minor snap 56 of the internal spline. The values of these parameters are displayed in color-coded boxes on the Spline Inputs and Configuration GUI screen 80. Once the parameters are entered, you’ll be presented with a geometric representation of the spline coupling model 20.

Creating a spline coupling model 20

The spline coupling model 20 is created by a product model software program 10. The software validates the spline coupling model against a knowledge base of configuration-dependent specification constraints and relationships. This report is then input to the ANSYS stress analyzer program. It lists the spline coupling model 20’s geometric configurations and specification values for each feature. The spline coupling model 20 is automatically recreated every time the configuration or performance specifications of the spline coupling model 20 are modified.
The spline coupling model 20 can be configured using the product model software program 10. A user specifies the axial length of the spline stack, which may be zero, or a fixed length. The user also enters a radial mating face 148, if any, and selects a pilot clearance specification value of 14.5 degrees or 30 degrees.
A user can then use the mouse 110 to modify the spline coupling model 20. The spline coupling knowledge base contains a large number of possible specification values and the spline coupling design rule. If the user tries to change a spline coupling model, the model will show a warning about a violation of another specification. In some cases, the modification may invalidate the design.
In the spline coupling model 20, the user enters additional performance requirement specifications. The user chooses the locations where maximum torque is transferred for the internal and external splines 38 and 40. The maximum torque transfer location is determined by the attachment configuration of the hardware to the shafts. Once this is selected, the user can click “Next” to save the model. A preview of the spline coupling model 20 is displayed.
The model 20 is a representation of a spline coupling. The spline specifications are entered in the order and arrangement as specified on the spline coupling model 20 GUI screen. Once the spline coupling specifications are entered, the product model software program 10 will incorporate them into the spline coupling model 20. This is the last step in spline coupling model creation.

Analysing a spline coupling model 20

An analysis of a spline coupling model consists of inputting its configuration and performance specifications. These specifications may be generated from another computer program. The product model software program 10 then uses its internal knowledge base of configuration dependent specification relationships and constraints to create a valid three-dimensional parametric model 20. This model contains information describing the number and types of spline teeth 32, snaps 34, and shoulder 36.
When you are analysing a spline coupling, the software program 10 will include default values for various specifications. The spline coupling model 20 comprises an internal spline 38 and an external spline 40. Each of the splines includes its own set of parameters, such as its depth, width, length, and radii. The external spline 40 will also contain its own set of parameters, such as its orientation.
Upon selecting these parameters, the software program will perform various analyses on the spline coupling model 20. The software program 10 calculates the nominal and maximal tooth bearing stresses and fatigue life of a spline coupling. It will also determine the difference in torsional windup between an internal and an external spline. The output file from the analysis will be a report file containing model configuration and specification data. The output file may also be used by other computer programs for further analysis.
Once these parameters are set, the user enters the design criteria for the spline coupling model 20. In this step, the user specifies the locations of maximum torque transfer for both the external and internal spline 38. The maximum torque transfer location depends on the configuration of the hardware attached to the shafts. The user may enter up to 4 different performance requirement specifications for each spline.
The results of the analysis show that there are 2 phases of spline coupling. The first phase shows a large increase in stress and vibration. The second phase shows a decline in both stress and vibration levels. The third stage shows a constant meshing force between 300N and 320N. This behavior continues for a longer period of time, until the final stage engages with the surface.

Misalignment of a spline coupling

A study aimed to investigate the position of the resultant contact force in a spline coupling engaging teeth under a steady torque and rotating misalignment. The study used numerical methods based on Finite Element Method (FEM) models. It produced numerical results for nominal conditions and parallel offset misalignment. The study considered 2 levels of misalignment – 0.02 mm and 0.08 mm – with different loading levels.
The results showed that the misalignment between the splines and rotors causes a change in the meshing force of the spline-rotor coupling system. Its dynamics is governed by the meshing force of splines. The meshing force of a misaligned spline coupling is related to the rotor-spline coupling system parameters, the transmitting torque, and the dynamic vibration displacement.
Despite the lack of precise measurements, the misalignment of splines is a common problem. This problem is compounded by the fact that splines usually feature backlash. This backlash is the result of the misaligned spline. The authors analyzed several splines, varying pitch diameters, and length/diameter ratios.
A spline coupling is a two-dimensional mechanical system, which has positive backlash. The spline coupling is comprised of a hub and shaft, and has tip-to-root clearances that are larger than the backlash. A form-clearance is sufficient to prevent tip-to-root fillet contact. The torque on the splines is transmitted via friction.
When a spline coupling is misaligned, a torque-biased thrust force is generated. In such a situation, the force can exceed the torque, causing the component to lose its alignment. The two-way transmission of torque and thrust is modeled analytically in the present study. The analytical approach provides solutions that can be integrated into the design process. So, the next time you are faced with a misaligned spline coupling problem, make sure to use an analytical approach!
In this study, the spline coupling is analyzed under nominal conditions without a parallel offset misalignment. The stiffness values obtained are the percentage difference between the nominal pitch diameter and load application diameter. Moreover, the maximum percentage difference in the measured pitch diameter is 1.60% under a torque of 5000 N*m. The other parameter, the pitch angle, is taken into consideration in the calculation.

This entry was posted in Product Catalog and tagged china machine, machine, machine sale on July 8, 2022 by ep.

China supplier High Quality Drive Plate Metal Fiber Laser Cutting Machine with Good quality

Product Description

Galvanized Steel Coil Laser Cutting Machine

Super advantages of our design for the machine:
One machine with integrated 3 in 1 functions of uncoiling, feeding and cutting, unloading which breaks the traditional production method, with the following advantages:
1.      saving labor cost: 1 worker can operator the machine
2.      saving material loading and unloading time, increasing production efficiency by 2times
3.      coil material cost is lower than sheet, straightening cost can be save 20usd/ton
4.      suitable for diversification and non-standard production, cutting file can be freely nested to save materials, material utilization rate is generally above 90%~95%
Product Description

Transportation

APPLICATION

Especially for Filing Cabinet, Kitchen ware, refrigerator, car and train cover cabinet, Chassis and Cabinets, rotors and so on production, and material sheet thickness less than 2mm carbon steel, stainless steel, silicon steel, galvanized steel and other metal roll materials.

What You Should Know About Axle Shafts

There are several things you should know about axle shafts. These include what materials they’re made of, how they’re constructed, and the signs of wear and tear. Read on to learn more about axle shafts and how to properly maintain them. Axle shafts are a crucial part of any vehicle. But how can you tell if 1 is worn out? Here are some tips that can help you determine whether it’s time to replace it.

Materials used for axle shafts

When it comes to materials used in axle shafts, there are 2 common types of materials. One is carbon fiber, which is relatively uncommon for linear applications. Carbon fiber shafting is produced by CZPT(r). The main benefit of carbon fiber shafting is its ultra-low weight. A carbon fiber shaft of 20mm diameter weighs just 0.17kg, as opposed to 2.46kg for a steel shaft of the same size.
The other type of material used in axle shafts is forged steel. This material is strong, but it is difficult to machine. The resulting material has residual stresses, voids, and hard spots that make it unsuitable for some applications. A forged steel shaft will not be able to be refinished to its original dimensions. In such cases, the shaft must be machined down to reduce the material’s hardness.
Alternatively, you can choose to purchase a through-hardened shaft. These types of axle shafts are suitable for light cars and those that use single bearings on their hub. However, the increased diameter of the axle shaft will result in less resistance to shock loads and torsional forces. For these applications, it is best to use medium-carbon alloy steel (MCA), which contains nickel and chromium. In addition, you may also need to jack up your vehicle to replace the axle shaft.
The spline features of the axle shaft must mate with the spline feature on the axle assembly. The spline feature has a slight curve that optimizes contact surface area and distribution of load. The process involves hobbing and rolling, and it requires special tooling to form this profile. However, it is important to note that an axle shaft with a cut spline will have a 30% smaller diameter than the corresponding 1 with an involute profile.
Another common material is the 300M alloy, which is a modified 4340 chromoly. This alloy provides additional strength, but is more prone to cracking. For this reason, this alloy isn’t suited for street-driven vehicles. Axle shafts made from this alloy are magnaflushed to detect cracks before they cause catastrophic failure. This heat treatment is not as effective as the other materials, but it is still a good choice for axle shafts.

Construction

There are 3 basic types of axle shafts: fully floating, three-quarter floating, and semi-floating. Depending on how the shaft is used, the axles can be either stationary or fully floating. Fully floating axle shafts are most common, but there are exceptions. Axle shafts may also be floating or stationary, or they may be fixed. When they are stationary, they are known as non-floating axles.
Different alloys have different properties. High-carbon steels are harder than low-carbon steels, while medium-carbon steels are less ductile. Medium-carbon steel is often used in axle shafts. Some shafts contain additional metals, including silicon, nickel, and copper, for case hardening. High-carbon steels are preferred over low-carbon steels. Axle shafts with high carbon content often have better heat-treatability than OE ones.
A semi-floating axle shaft has a single bearing between the hub and casing, relieving the main shear stress on the shaft but must still withstand other stresses. A half shaft needs to withstand bending loads from side thrust during cornering while transmitting driving torque. A three-quarter floating axle shaft is typically fitted to commercial vehicles that are more capable of handling higher axle loads and torque. However, it is possible to replace or upgrade the axle shaft with a replacement axle shaft, but this will require jacking the vehicle and removing the studs.
A half-floating axle is an alternative to a fixed-length rear axle. This axle design is ideal for mid-size trucks. It supports the weight of the mid-size truck and may support mid-size trucks with high towing capacities. The axle housing supports the inner end of the axle and also takes up the end thrust from the vehicle’s tires. A three-quarter floating axle, on the other hand, is a complex type that is not as simple as a semi-floating axle.
Axle shafts are heavy-duty load-bearing components that transmit rotational force from the rear differential gearbox to the rear wheels. The half shaft and the axle casing support the road wheel. Below is a diagram of different forces that can occur in the axle assembly depending on operating conditions. The total weight of the vehicle’s rear can exert a bending action on the half shaft, and the overhanging section of the shaft can be subject to a shearing force.

Symptoms of wear out

The constant velocity axle, also called the half shaft, transmits power from the transmission to the wheels, allowing the vehicle to move forward. When it fails, it can result in many problems. Here are 4 common symptoms of a bad CV axle:
Bad vibrations: If you notice any sort of abnormal vibration while driving, this may be a sign of axle damage. Vibrations may accompany a strange noise coming from under the vehicle. You may also notice tire wobble. It is important to repair this problem as it could be harmful to your car’s handling and comfort. A damaged axle is generally accompanied by other problems, including a weak braking response.
A creaking or popping sound: If you hear this noise when turning your vehicle, you probably have a worn out CV axle. When the CV joints lose their balance, the driveshaft is no longer supported by the U-joints. This can cause a lot of vibrations, which can reduce your vehicle’s comfort and safety. Fortunately, there are easy ways to check for worn CV axles.
CV joints: A CV joint is located at each end of the axle shaft. In front-wheel drive vehicles, there are 2 CV joints, 1 on each axle. The outer CV joint connects the axle shaft to the wheel and experiences more movement. In fact, the CV joints are only as good as the boot. The most common symptoms of a failed CV joint include clicking and popping noises while turning or when accelerating.
CV joint: Oftentimes, CV joints wear out half of the axle shaft. While repairing a CV joint is a viable repair, it is more expensive than replacing the axle. In most cases, you should replace the CV joint. Replacement will save you time and money. ACV joints are a vital part of your vehicle’s drivetrain. Even if they are worn, they should be checked if they are loose.
Unresponsive acceleration: The vehicle may be jerky, shuddering, or slipping. This could be caused by a bent axle. The problem may be a loose U-joint or center bearing, and you should have your vehicle inspected immediately by a qualified mechanic. If you notice jerkiness, have a mechanic check the CV joints and other components of the vehicle. If these components are not working properly, the vehicle may be dangerous.

Maintenance

There are several points of concern regarding the maintenance of axle shafts. It is imperative to check the axle for any damage and to lubricate it. If it is clean, it may be lubricated and is working properly. If not, it will require replacement. The CV boots need to be replaced. A broken axle shaft can result in catastrophic damage to the transmission or even cause an accident. Fortunately, there are several simple ways to maintain the axle shaft.
In addition to oil changes, it is important to check the differential lube level. Some differentials need cleaning or repacking every so often. CZPT Moreno Valley, CA technicians know how to inspect and maintain axles, and they can help you determine if a problem is affecting your vehicle’s performance. Some common signs of axle problems include excessive vibrations, clunking, and a high-pitched howling noise.
If you’ve noticed any of these warning signs, contact your vehicle’s manufacturer. Most manufacturers offer service for their axles. If it’s too rusted or damaged, they’ll replace it for you for free. If you’re in doubt, you can take it to a service center for a repair. They’ll be happy to assist you in any aspect of your vehicle’s maintenance. It’s never too early to begin.
CZPT Moreno Valley, CA technicians are well-versed in the repair of axles and differentials. The CV joint, which connects the car’s transmission to the rear wheels, is responsible for transferring the power from the engine to the wheels. Aside from the CV joint, there are also protective boots on both ends of the axle shaft. The protective boots can tear with age or use. When they tear, they allow grease and debris to escape and get into the joint.
While the CV joint is the most obvious place to replace it, this isn’t a time to ignore this important component. Taking care of the CV joint will protect your car from costly breakdowns at the track. While servicing half shafts can help prevent costly replacement of CV joints, it’s best to do it once a season or halfway through the season. ACV joints are essential for your car’s safety and function.

This entry was posted in Product Catalog and tagged china machine, cutting machine, fiber laser cutting machine, fiber laser machine, fiber machine, laser cutting machine, laser cutting machine fiber, laser machine, machine, machine cutting, machine laser, metal cutting machine, metal laser cutting machine, metal machine on July 8, 2022 by ep.

China Standard High-Speed Servo Motor Drive Corrugated Roofing Sheet Roll Forming Rolling Machine near me manufacturer

Product Description

Product Description

High-speed Servo Motor Drive Corrugated Roofing Sheet Roll Forming Rolling Machine

Detailed Photos

Product Parameters

Type China Color Steel Corrugated Steel Roll Forming Machine

Thickness Of Material 0.3-0.8mm

Frame Design 350H steel

Roll Stages 14 stages

Material Of Forming Roller 45# steel CNC Iathes Hard Chrome Coated

Shafts Diameter 70mm

Thickness Of Middle plate 16mm

Main Motor Power 4KW

Speed 13-15M/min

Electric Standard 380V/50HZ/3PH or as your need

Color of Machine Blue or as your requirements

Certifications

Packaging & Shipping

The plastic film wraps the entire machine to prevent the machine from being bumped during transportation.
The oil wire rope is finally reinforced in the container. If necessary, there are also skids to pack and reinforce
the machine parts.

Company Profile

HangZhou Hener International Co., Ltd is a professional integrating R & D, production, sales, export and service. We have professional foreign trade sales team, operation team, R & D team and after-sales team. Our R & D cycle for new products is at least 20 days. The working experience of our sales team is 3-5 years. The R & D personnel are all undergraduates. The average equipment maintenance experience of after-sales engineer is 8 years. In order to supply the satisfactory products and services, we have built a modern quality management system which is in strict accordance with international standards.

After Sales Service

1.we can provide all kind of roll forming equipment which can be used to forming all kinds of shape as you required. The company can make non-standard products for client’s requirement.

2.About after-sales service. We provide online training for life, you can also come to our company to learn, there will be professional staff to teach, you can also send technicians to your country to repair the machine. The buyer shall bear all costs.

3.The warranty period is 24 months. We will provide you with lifetime technical support. The machine can be repaired free of charge for the first year after purchase, including replacement of main components.

FAQ

1. Does one machine can only produce one style panel profile?

Not exactly.For wider and double layer making machine. It can produce more than 6 kinds of panels.

2. Do you have after sales support?
Yes, we are happy to give advice and we also have skilled technicians available across the world.We need your machines running in order to keep
your business running.

3. How to visit your company?

a.Fly to ZheJiang airport:   By high speed train From ZheJiang Nan to CangZhou Xi (1 hour), then we can pick up you.

b.Fly to ZheJiang Airport: By high speed train From ZheJiang HongQiao to HangZhou Xi(4.5 hours), then we can pick up you.

4. What can you do if the machine broken?

Our machine’s warranty period is 24months,if the broken parts can’t repair,we can send the new parts replace the broken parts freely,but you need
pay the express cost   yourself.if after warranty period,we can through negotiation for to solve the problems,and we supply the technical support for
the whole life of the equipment.

5. Can you be responsible for transport?

Yes,please tell me the destination port or address.we have rich experience in transport.

6. Why your price is higher than others?
As we persist on that each factory should put quality at the first place. We spend time and money on developing how to make machines much more automatic, accurate and high quality.

An Overview of Worm Shafts and Gears

This article provides an overview of worm shafts and gears, including the type of toothing and deflection they experience. Other topics covered include the use of aluminum versus bronze worm shafts, calculating worm shaft deflection and lubrication. A thorough understanding of these issues will help you to design better gearboxes and other worm gear mechanisms. For further information, please visit the related websites. We also hope that you will find this article informative.

Double throat worm gears

The pitch diameter of a worm and the pitch of its worm wheel must be equal. The 2 types of worm gears have the same pitch diameter, but the difference lies in their axial and circular pitches. The pitch diameter is the distance between the worm’s teeth along its axis and the pitch diameter of the larger gear. Worms are made with left-handed or right-handed threads. The lead of the worm is the distance a point on the thread travels during 1 revolution of the worm gear. The backlash measurement should be made in a few different places on the gear wheel, as a large amount of backlash implies tooth spacing.
A double-throat worm gear is designed for high-load applications. It provides the tightest connection between worm and gear. It is crucial to mount a worm gear assembly correctly. The keyway design requires several points of contact, which block shaft rotation and help transfer torque to the gear. After determining the location of the keyway, a hole is drilled into the hub, which is then screwed into the gear.
The dual-threaded design of worm gears allows them to withstand heavy loads without slipping or tearing out of the worm. A double-throat worm gear provides the tightest connection between worm and gear, and is therefore ideal for hoisting applications. The self-locking nature of the worm gear is another advantage. If the worm gears are designed well, they are excellent for reducing speeds, as they are self-locking.
When choosing a worm, the number of threads that a worm has is critical. Thread starts determine the reduction ratio of a pair, so the higher the threads, the greater the ratio. The same is true for the worm helix angles, which can be one, two, or 3 threads long. This varies between a single thread and a double-throat worm gear, and it is crucial to consider the helix angle when selecting a worm.
Double-throat worm gears differ in their profile from the actual gear. Double-throat worm gears are especially useful in applications where noise is an issue. In addition to their low noise, worm gears can absorb shock loads. A double-throat worm gear is also a popular choice for many different types of applications. These gears are also commonly used for hoisting equipment. Its tooth profile is different from that of the actual gear.

Bronze or aluminum worm shafts

When selecting a worm, a few things should be kept in mind. The material of the shaft should be either bronze or aluminum. The worm itself is the primary component, but there are also addendum gears that are available. The total number of teeth on both the worm and the addendum gear should be greater than 40. The axial pitch of the worm needs to match the circular pitch of the larger gear.
The most common material used for worm gears is bronze because of its desirable mechanical properties. Bronze is a broad term referring to various copper alloys, including copper-nickel and copper-aluminum. Bronze is most commonly created by alloying copper with tin and aluminum. In some cases, this combination creates brass, which is a similar metal to bronze. The latter is less expensive and suitable for light loads.
There are many benefits to bronze worm gears. They are strong and durable, and they offer excellent wear-resistance. In contrast to steel worms, bronze worm gears are quieter than their counterparts. They also require no lubrication and are corrosion-resistant. Bronze worms are popular with small, light-weight machines, as they are easy to maintain. You can read more about worm gears in CZPT’s CZPT.
Although bronze or aluminum worm shafts are the most common, both materials are equally suitable for a variety of applications. A bronze shaft is often called bronze but may actually be brass. Historically, worm gears were made of SAE 65 gear bronze. However, newer materials have been introduced. SAE 65 gear bronze (UNS C90700) remains the preferred material. For high-volume applications, the material savings can be considerable.
Both types of worms are essentially the same in size and shape, but the lead on the left and right tooth surfaces can vary. This allows for precise adjustment of the backlash on a worm without changing the center distance between the worm gear. The different sizes of worms also make them easier to manufacture and maintain. But if you want an especially small worm for an industrial application, you should consider bronze or aluminum.

Calculation of worm shaft deflection

The centre-line distance of a worm gear and the number of worm teeth play a crucial role in the deflection of the rotor. These parameters should be entered into the tool in the same units as the main calculation. The selected variant is then transferred to the main calculation. The deflection of the worm gear can be calculated from the angle at which the worm teeth shrink. The following calculation is helpful for designing a worm gear.
Worm gears are widely used in industrial applications due to their high transmittable torques and large gear ratios. Their hard/soft material combination makes them ideally suited for a wide range of applications. The worm shaft is typically made of case-hardened steel, and the worm wheel is fabricated from a copper-tin-bronze alloy. In most cases, the wheel is the area of contact with the gear. Worm gears also have a low deflection, as high shaft deflection can affect the transmission accuracy and increase wear.
Another method for determining worm shaft deflection is to use the tooth-dependent bending stiffness of a worm gear’s toothing. By calculating the stiffness of the individual sections of a worm shaft, the stiffness of the entire worm can be determined. The approximate tooth area is shown in figure 5.
Another way to calculate worm shaft deflection is by using the FEM method. The simulation tool uses an analytical model of the worm gear shaft to determine the deflection of the worm. It is based on a two-dimensional model, which is more suitable for simulation. Then, you need to input the worm gear’s pitch angle and the toothing to calculate the maximum deflection.

Lubrication of worm shafts

In order to protect the gears, worm drives require lubricants that offer excellent anti-wear protection, high oxidation resistance, and low friction. While mineral oil lubricants are widely used, synthetic base oils have better performance characteristics and lower operating temperatures. The Arrhenius Rate Rule states that chemical reactions double every 10 degrees C. Synthetic lubricants are the best choice for these applications.
Synthetics and compounded mineral oils are the most popular lubricants for worm gears. These oils are formulated with mineral basestock and 4 to 6 percent synthetic fatty acid. Surface-active additives give compounded gear oils outstanding lubricity and prevent sliding wear. These oils are suited for high-speed applications, including worm gears. However, synthetic oil has the disadvantage of being incompatible with polycarbonate and some paints.
Synthetic lubricants are expensive, but they can increase worm gear efficiency and operating life. Synthetic lubricants typically fall into 2 categories: PAO synthetic oils and EP synthetic oils. The latter has a higher viscosity index and can be used at a range of temperatures. Synthetic lubricants often contain anti-wear additives and EP (anti-wear).
Worm gears are frequently mounted over or under the gearbox. The proper lubrication is essential to ensure the correct mounting and operation. Oftentimes, inadequate lubrication can cause the unit to fail sooner than expected. Because of this, a technician may not make a connection between the lack of lube and the failure of the unit. It is important to follow the manufacturer’s recommendations and use high-quality lubricant for your gearbox.
Worm drives reduce backlash by minimizing the play between gear teeth. Backlash can cause damage if unbalanced forces are introduced. Worm drives are lightweight and durable because they have minimal moving parts. In addition, worm drives are low-noise and vibration. In addition, their sliding motion scrapes away excess lubricant. The constant sliding action generates a high amount of heat, which is why superior lubrication is critical.
Oils with a high film strength and excellent adhesion are ideal for lubrication of worm gears. Some of these oils contain sulfur, which can etch a bronze gear. In order to avoid this, it is imperative to use a lubricant that has high film strength and prevents asperities from welding. The ideal lubricant for worm gears is 1 that provides excellent film strength and does not contain sulfur.

This entry was posted in Product Catalog and tagged china machine, china motor, forming machine, machine, machine china manufacturer, machine manufacturer, machine motor, machine roll, machine servo motor, motor, motor drive, motor motor, motor servo, roll forming machine, rolling machine, roofing sheet machine, servo motor, sheet machine on July 8, 2022 by ep.

China Best Sales High Efficiency Bottom Drive Size Adjust Automatically Pneumatic Carton Sealer Box Tape Sealing Machine Carton Sealer Box Sealing Packaging Machine with Good quality

Product Description

Product Description

Product Parameters

Model SKX-01 SFX-05 SFX-09 SDB-102B

Carton Size (200-500)L×(150-450)W×(150-350)Hmm

Working Speed 8-10 Ctn/Min

Arch Size 800*600mm

Power Supply 220V/1PH/50Hz

Weight 500Kgs 250Kgs 450Kgs 280Kgs

Air Pressure 0.6-0.8Mpa

Table Height 450+50mm

Detailed Photos

Our Advantages

Certifications

FAQ

1. What about your tube filling and sealing machine quality?

Our factory has 16 years experience in mechanical processing; all our machines already get ISO9001, SGS

certificate, CE certificate; already exported into many countries and areas; already got customer’s good reputation.

2. What about your tube filling and sealing machine price?

Anytime we will make quality as factory life, no matter price is good or not for us. Quality is first, on the top quality basis, Sure you will get reasonable and satisfied price!

3.Can you send me the video to show how the tube filling and sealing machine work?

Certainly, we have made video of every machine and uploaded them by our chain address.Pls. contact with us, we will send you machine video.

4.What about your installation service and sales service for tube filling and sealing machine ?

1>Guarantee is 2 year, we will supply spare parts or send engineers to your side if you need, we will give you service anytime, 24 hours, 7days.

2>We already prepare technical manual and operation video to show our customers, then it will be easy to install and use the machine.

3>It is free to train your worker in our factory or in your side or by video.

Company Profile

Ausim Automation Technology (ZheJiang )Co.Ltd, which is located at Xihu (West Lake) Dis. Industry Zone, ZheJiang , closed to great Xihu (West Lake) Dis.ao transport hubs, lies north to the spectacular SHangZhou Scenic Area, Traffic in convenient and strategic location, we are the most professional manufacturing in shrink wrapper, carton sealer and erector , pallet wrapping machine which combined with R & D, manufacturing, sales and service as 1 of the high-tech enterprises.. always pursue the “quality first, the credibility of the first” business purposes, and constantly respected “people-oriented, technology leadership, service-oriented” modern enterprise management philosophy. Improve technical talent, update production equipment, create new products is our pursuit of the goal. All employees to work, innovation, integrity, and jointly set a stable market, improve the corporate image. The company introduced advanced talent and technology, independent research and development, production and transformation of the models stable performance, excellent quality, user-friendly operation, the products are widely used .Become the domestic and foreign customers trusted partner.

What Are Screw Shaft Threads?

A screw shaft is a threaded part used to fasten other components. The threads on a screw shaft are often described by their Coefficient of Friction, which describes how much friction is present between the mating surfaces. This article discusses these characteristics as well as the Material and Helix angle. You’ll have a better understanding of your screw shaft’s threads after reading this article. Here are some examples. Once you understand these details, you’ll be able to select the best screw nut for your needs.

Coefficient of friction between the mating surfaces of a nut and a screw shaft

There are 2 types of friction coefficients. Dynamic friction and static friction. The latter refers to the amount of friction a nut has to resist an opposing motion. In addition to the material strength, a higher coefficient of friction can cause stick-slip. This can lead to intermittent running behavior and loud squeaking. Stick-slip may lead to a malfunctioning plain bearing. Rough shafts can be used to improve this condition.
The 2 types of friction coefficients are related to the applied force. When applying force, the applied force must equal the nut’s pitch diameter. When the screw shaft is tightened, the force may be removed. In the case of a loosening clamp, the applied force is smaller than the bolt’s pitch diameter. Therefore, the higher the property class of the bolt, the lower the coefficient of friction.
In most cases, the screwface coefficient of friction is lower than the nut face. This is because of zinc plating on the joint surface. Moreover, power screws are commonly used in the aerospace industry. Whether or not they are power screws, they are typically made of carbon steel, alloy steel, or stainless steel. They are often used in conjunction with bronze or plastic nuts, which are preferred in higher-duty applications. These screws often require no holding brakes and are extremely easy to use in many applications.
The coefficient of friction between the mating surfaces of t-screws is highly dependent on the material of the screw and the nut. For example, screws with internal lubricated plastic nuts use bearing-grade bronze nuts. These nuts are usually used on carbon steel screws, but can be used with stainless steel screws. In addition to this, they are easy to clean.

Helix angle

In most applications, the helix angle of a screw shaft is an important factor for torque calculation. There are 2 types of helix angle: right and left hand. The right hand screw is usually smaller than the left hand one. The left hand screw is larger than the right hand screw. However, there are some exceptions to the rule. A left hand screw may have a greater helix angle than a right hand screw.
A screw’s helix angle is the angle formed by the helix and the axial line. Although the helix angle is not usually changed, it can have a significant effect on the processing of the screw and the amount of material conveyed. These changes are more common in 2 stage and special mixing screws, and metering screws. These measurements are crucial for determining the helix angle. In most cases, the lead angle is the correct angle when the screw shaft has the right helix angle.
High helix screws have large leads, sometimes up to 6 times the screw diameter. These screws reduce the screw diameter, mass, and inertia, allowing for higher speed and precision. High helix screws are also low-rotation, so they minimize vibrations and audible noises. But the right helix angle is important in any application. You must carefully choose the right type of screw for the job at hand.
If you choose a screw gear that has a helix angle other than parallel, you should select a thrust bearing with a correspondingly large center distance. In the case of a screw gear, a 45-degree helix angle is most common. A helix angle greater than zero degrees is also acceptable. Mixing up helix angles is beneficial because it allows for a variety of center distances and unique applications.

Thread angle

The thread angle of a screw shaft is measured from the base of the head of the screw to the top of the screw’s thread. In America, the standard screw thread angle is 60 degrees. The standard thread angle was not widely adopted until the early twentieth century. A committee was established by the Franklin Institute in 1864 to study screw threads. The committee recommended the Sellers thread, which was modified into the United States Standard Thread. The standardized thread was adopted by the United States Navy in 1868 and was recommended for construction by the Master Car Builders’ Association in 1871.
Generally speaking, the major diameter of a screw’s threads is the outside diameter. The major diameter of a nut is not directly measured, but can be determined with go/no-go gauges. It is necessary to understand the major and minor diameters in relation to each other in order to determine a screw’s thread angle. Once this is known, the next step is to determine how much of a pitch is necessary to ensure a screw’s proper function.
Helix angle and thread angle are 2 different types of angles that affect screw efficiency. For a lead screw, the helix angle is the angle between the helix of the thread and the line perpendicular to the axis of rotation. A lead screw has a greater helix angle than a helical one, but has higher frictional losses. A high-quality lead screw requires a higher torque to rotate. Thread angle and lead angle are complementary angles, but each screw has its own specific advantages.
Screw pitch and TPI have little to do with tolerances, craftsmanship, quality, or cost, but rather the size of a screw’s thread relative to its diameter. Compared to a standard screw, the fine and coarse threads are easier to tighten. The coarser thread is deeper, which results in lower torques. If a screw fails because of torsional shear, it is likely to be a result of a small minor diameter.

Material

Screws have a variety of different sizes, shapes, and materials. They are typically machined on CNC machines and lathes. Each type is used for different purposes. The size and material of a screw shaft are influenced by how it will be used. The following sections give an overview of the main types of screw shafts. Each 1 is designed to perform a specific function. If you have questions about a specific type, contact your local machine shop.
Lead screws are cheaper than ball screws and are used in light-duty, intermittent applications. Lead screws, however, have poor efficiency and are not recommended for continuous power transmission. But, they are effective in vertical applications and are more compact. Lead screws are typically used as a kinematic pair with a ball screw. Some types of lead screws also have self-locking properties. Because they have a low coefficient of friction, they have a compact design and very few parts.
Screws are made of a variety of metals and alloys. Steel is an economical and durable material, but there are also alloy steel and stainless steel types. Bronze nuts are the most common and are often used in higher-duty applications. Plastic nuts provide low-friction, which helps reduce the drive torques. Stainless steel screws are also used in high-performance applications, and may be made of titanium. The materials used to create screw shafts vary, but they all have their specific functions.
Screws are used in a wide range of applications, from industrial and consumer products to transportation equipment. They are used in many different industries, and the materials they’re made of can determine their life. The life of a screw depends on the load that it bears, the design of its internal structure, lubrication, and machining processes. When choosing screw assemblies, look for a screw made from the highest quality steels possible. Usually, the materials are very clean, so they’re a great choice for a screw. However, the presence of imperfections may cause a normal fatigue failure.

Self-locking features

Screws are known to be self-locking by nature. The mechanism for this feature is based on several factors, such as the pitch angle of the threads, material pairing, lubrication, and heating. This feature is only possible if the shaft is subjected to conditions that are not likely to cause the threads to loosen on their own. The self-locking ability of a screw depends on several factors, including the pitch angle of the thread flank and the coefficient of sliding friction between the 2 materials.
One of the most common uses of screws is in a screw top container lid, corkscrew, threaded pipe joint, vise, C-clamp, and screw jack. Other applications of screw shafts include transferring power, but these are often intermittent and low-power operations. Screws are also used to move material in Archimedes’ screw, auger earth drill, screw conveyor, and micrometer.
A common self-locking feature for a screw is the presence of a lead screw. A screw with a low PV value is safe to operate, but a screw with high PV will need a lower rotation speed. Another example is a self-locking screw that does not require lubrication. The PV value is also dependent on the material of the screw’s construction, as well as its lubrication conditions. Finally, a screw’s end fixity – the way the screw is supported – affects the performance and efficiency of a screw.
Lead screws are less expensive and easier to manufacture. They are a good choice for light-weight and intermittent applications. These screws also have self-locking capabilities. They can be self-tightened and require less torque for driving than other types. The advantage of lead screws is their small size and minimal number of parts. They are highly efficient in vertical and intermittent applications. They are not as accurate as lead screws and often have backlash, which is caused by insufficient threads.

This entry was posted in Product Catalog and tagged box packaging machine, carton machine, carton packaging box machine, china machine, machine, machine carton, machine packaging, sealer machine, tape machine on July 8, 2022 by ep.

China Professional CD-3450 Rotary Type Automatic Servo Drive Blister Card Packing Machine near me factory

Product Description

CD-3450 Rotary Type Automatic Servo Drive Blister Card Packing Machine

Machine Application

Machine Introduction

The blister material can be PVC or PET and other rigid materials.

Large forming and sealing area.It has wide range of purposes,suitable for large batches production.

Convenient for feeding products or install extra function device,Feeding products can be manually or by special robot.

The forming mold can be different types according to the blister size,shape.

The material dragged by servo motor and the forming station driven synchronously,to ensure the machine machine runs continuously.

Output the finished package in the end of the machine,also can be connected to the secondary procedure,such as carton packing,barcode printing.

Machine Parameters

The whole machine can be custom-made,such as protection door with safety lock,appointed electrical components.

Forming area 500x220mm

Sealing area
500x140mm

Output
6-15 cycles/min. According the packaging material,blister shape,and sealing period.

Company Profile

ZHangZhoug CZPT Machinery Co.,Ltd.(Previous name:HangZhou CZPT Machinery Co.,Ltd.) established in the year of 2009 with employees of 50 and official production area about 4000 m² .
In 2019,listed on the growth board of ZHangZhoug Stock Market. Referred to as CZPT Stock,company code:8 0571 2
  Since the company establishment,we focus on the development and the production of the automatic blister packaging machine and custom automation equipment.
  In the serials of the blister machine,there are varies models for choosing to meet different packaging requirements.
  The blister packaging can be many types,such as Blister-Card,Card-Blister(Single blister or alu.-blister pack)-Card, Blister-Blister,Stand Up Blister,and also the soft/rigid blister with soft film covered for medical use.We can help users to improve the whole production line,not only the front procedure but also the latter procedure.
  Depending on the proven technology and the reliable after-sales security system,our machines receive the recognition of all customers.

We serve for the famous companies in the world,such as P&G,Duracell,Energizer,Spectrum Brands,Mentholatum,Korea Hyosung,Huafon Group,Deli Stationery,GP battery,Nanfu,Changhong,Mustang battery,Xihu (West Lake) Dis.shan battery,Zhongyin battery,etc.

After years of experience,we deeply understand that blister packaging does not have standard equipment.But we are more willing to try to research and development and innovation,so that non-standard equipment can be realized and our customers can receive better services.

Chengda Team

FAQ

1.Where is your factory? How can I visit your factory?

Our factory is located In Rui’an ZHangZhoug province. We warmly welcome you to visit our factory if you have a travel plan.we can pick you up at the HangZhou longwan airport or HangZhou train station.

2.How can I know your machine is designed for my product?

You can send us samples and we will test on machines. Before making the machine.we will draw the design picture to send you,We can also show you on-line by video chatting.we will start assembling the machine after you make sure.

3.How about the delivery time?

Different machine have different delivery time. It’ depend on the technical difficulty.

4.Can you offer overseas after sales service?

1. We will offer the English operation manul for every machine.
2. We offer online operation training.
3. If you need us come to your factory train the workers the cost should paid by customers.

How to Calculate Stiffness, Centering Force, Wear and Fatigue Failure of Spline Couplings

There are various types of spline couplings. These couplings have several important properties. These properties are: Stiffness, Involute splines, Misalignment, Wear and fatigue failure. To understand how these characteristics relate to spline couplings, read this article. It will give you the necessary knowledge to determine which type of coupling best suits your needs. Keeping in mind that spline couplings are usually spherical in shape, they are made of steel.

Involute splines

An effective side interference condition minimizes gear misalignment. When 2 splines are coupled with no spline misalignment, the maximum tensile root stress shifts to the left by 5 mm. A linear lead variation, which results from multiple connections along the length of the spline contact, increases the effective clearance or interference by a given percentage. This type of misalignment is undesirable for coupling high-speed equipment.
Involute splines are often used in gearboxes. These splines transmit high torque, and are better able to distribute load among multiple teeth throughout the coupling circumference. The involute profile and lead errors are related to the spacing between spline teeth and keyways. For coupling applications, industry practices use splines with 25 to 50-percent of spline teeth engaged. This load distribution is more uniform than that of conventional single-key couplings.
To determine the optimal tooth engagement for an involved spline coupling, Xiangzhen Xue and colleagues used a computer model to simulate the stress applied to the splines. The results from this study showed that a “permissible” Ruiz parameter should be used in coupling. By predicting the amount of wear and tear on a crowned spline, the researchers could accurately predict how much damage the components will sustain during the coupling process.
There are several ways to determine the optimal pressure angle for an involute spline. Involute splines are commonly measured using a pressure angle of 30 degrees. Similar to gears, involute splines are typically tested through a measurement over pins. This involves inserting specific-sized wires between gear teeth and measuring the distance between them. This method can tell whether the gear has a proper tooth profile.
The spline system shown in Figure 1 illustrates a vibration model. This simulation allows the user to understand how involute splines are used in coupling. The vibration model shows 4 concentrated mass blocks that represent the prime mover, the internal spline, and the load. It is important to note that the meshing deformation function represents the forces acting on these 3 components.

Stiffness of coupling

The calculation of stiffness of a spline coupling involves the measurement of its tooth engagement. In the following, we analyze the stiffness of a spline coupling with various types of teeth using 2 different methods. Direct inversion and blockwise inversion both reduce CPU time for stiffness calculation. However, they require evaluation submatrices. Here, we discuss the differences between these 2 methods.
The analytical model for spline couplings is derived in the second section. In the third section, the calculation process is explained in detail. We then validate this model against the FE method. Finally, we discuss the influence of stiffness nonlinearity on the rotor dynamics. Finally, we discuss the advantages and disadvantages of each method. We present a simple yet effective method for estimating the lateral stiffness of spline couplings.
The numerical calculation of the spline coupling is based on the semi-analytical spline load distribution model. This method involves refined contact grids and updating the compliance matrix at each iteration. Hence, it consumes significant computational time. Further, it is difficult to apply this method to the dynamic analysis of a rotor. This method has its own limitations and should be used only when the spline coupling is fully investigated.
The meshing force is the force generated by a misaligned spline coupling. It is related to the spline thickness and the transmitting torque of the rotor. The meshing force is also related to the dynamic vibration displacement. The result obtained from the meshing force analysis is given in Figures 7, 8, and 9.
The analysis presented in this paper aims to investigate the stiffness of spline couplings with a misaligned spline. Although the results of previous studies were accurate, some issues remained. For example, the misalignment of the spline may cause contact damages. The aim of this article is to investigate the problems associated with misaligned spline couplings and propose an analytical approach for estimating the contact pressure in a spline connection. We also compare our results to those obtained by pure numerical approaches.

Misalignment

To determine the centering force, the effective pressure angle must be known. Using the effective pressure angle, the centering force is calculated based on the maximum axial and radial loads and updated Dudley misalignment factors. The centering force is the maximum axial force that can be transmitted by friction. Several published misalignment factors are also included in the calculation. A new method is presented in this paper that considers the cam effect in the normal force.
In this new method, the stiffness along the spline joint can be integrated to obtain a global stiffness that is applicable to torsional vibration analysis. The stiffness of bearings can also be calculated at given levels of misalignment, allowing for accurate estimation of bearing dimensions. It is advisable to check the stiffness of bearings at all times to ensure that they are properly sized and aligned.
A misalignment in a spline coupling can result in wear or even failure. This is caused by an incorrectly aligned pitch profile. This problem is often overlooked, as the teeth are in contact throughout the involute profile. This causes the load to not be evenly distributed along the contact line. Consequently, it is important to consider the effect of misalignment on the contact force on the teeth of the spline coupling.
The centre of the male spline in Figure 2 is superposed on the female spline. The alignment meshing distances are also identical. Hence, the meshing force curves will change according to the dynamic vibration displacement. It is necessary to know the parameters of a spline coupling before implementing it. In this paper, the model for misalignment is presented for spline couplings and the related parameters.
Using a self-made spline coupling test rig, the effects of misalignment on a spline coupling are studied. In contrast to the typical spline coupling, misalignment in a spline coupling causes fretting wear at a specific position on the tooth surface. This is a leading cause of failure in these types of couplings.

Wear and fatigue failure

The failure of a spline coupling due to wear and fatigue is determined by the first occurrence of tooth wear and shaft misalignment. Standard design methods do not account for wear damage and assess the fatigue life with big approximations. Experimental investigations have been conducted to assess wear and fatigue damage in spline couplings. The tests were conducted on a dedicated test rig and special device connected to a standard fatigue machine. The working parameters such as torque, misalignment angle, and axial distance have been varied in order to measure fatigue damage. Over dimensioning has also been assessed.
During fatigue and wear, mechanical sliding takes place between the external and internal splines and results in catastrophic failure. The lack of literature on the wear and fatigue of spline couplings in aero-engines may be due to the lack of data on the coupling’s application. Wear and fatigue failure in splines depends on a number of factors, including the material pair, geometry, and lubrication conditions.
The analysis of spline couplings shows that over-dimensioning is common and leads to different damages in the system. Some of the major damages are wear, fretting, corrosion, and teeth fatigue. Noise problems have also been observed in industrial settings. However, it is difficult to evaluate the contact behavior of spline couplings, and numerical simulations are often hampered by the use of specific codes and the boundary element method.
The failure of a spline gear coupling was caused by fatigue, and the fracture initiated at the bottom corner radius of the keyway. The keyway and splines had been overloaded beyond their yield strength, and significant yielding was observed in the spline gear teeth. A fracture ring of non-standard alloy steel exhibited a sharp corner radius, which was a significant stress raiser.
Several components were studied to determine their life span. These components include the spline shaft, the sealing bolt, and the graphite ring. Each of these components has its own set of design parameters. However, there are similarities in the distributions of these components. Wear and fatigue failure of spline couplings can be attributed to a combination of the 3 factors. A failure mode is often defined as a non-linear distribution of stresses and strains.

This entry was posted in Product Catalog and tagged automatic machine, automatic packing machine, blister machine, blister packing machine, card machine, china machine, machine, machine automatic, machine packing, packing machine, packing machine automatic, packing machine packing machine on July 8, 2022 by ep.

Post navigation

← Older posts

Newer posts →

Search

Recent Posts

China Custom Made in China High Quality Semi-Trailer Tractor Parts Factory Price Price Selling 12t/13t/15t/16t Payload German Trailer Axle with ABS, The Best-Selling Truck T wheel and axle

China OEM 13t 15t 16t 20t American/Germany Type Trailer Axle Utility Trailer Axles Heavy Duty Trailer Axles axle boot

China Professional Premium 2-Ton Electric Vehicle Axles for Global Buyers cv axle replacement

China Hot selling Best Supplier of High Quality CV Axles for All Kinds of Japanese Germany Cars Wholesale Price Car Accessories A1243508810 wholesaler

China Standard 127mm Square Beam 11 Ton Low Bed Axle for Lowboy Truck Trailer supplier

China best 80-110HP Tractor Front Drive Axle: Rn 4WD boat trailer axle

China supplier Disc Brake Axle Semi Trailer Axle for Sale axle alignment

China Hot selling Inboard Series American CZPT Type Trailer Axle American Type Semi Trailer Axle manufacturer

China supplier CE Approved Available CZPT in Bulk Track 1850mm or Optional Suspension 16ton Axle with Best Sales

China Hot selling Hot Product Semi-Trailer Square Rear Axle axle equalizer

China Good quality Factory Direct Wholesale Prices Are Cheap and Quality Is Good 7000 Lbs Trailer Axles for Sale boat trailer axle

China Good quality Best Quality 3.5K Car Trailer Axles with Electric Brakes axle bolt

China Custom Trailer Axle Semi Trailer Truck Amercian Germany Type axle extender

China Professional American Type Trailer Parts Truck Axle for Sale broken axle on car

China Custom ISO Stud Square Beam Sws Type Axle with Good quality

China Hot selling Factory Direct Sales 3t Lightweight High-Quality Customized 4 Lug Trailer Axle axle boot

China wholesaler Hot Manufacturers Direct Supply Original Factory CZPT Heavy Truck Parts 13t 16t Trailer Axle axle cost

China factory 13 Ton American Type Outboard External Trailer Axle for Sale axle definition

China OEM German Type Axle 12t Semi Trailer Axle cv axle

China Good quality China Factory Sale 13t America Type Semi Trailer Axle axle end caps

China Standard Semi Trailer Parts 18 Ton German Axle BPW Axles axle extender

China manufacturer The Shaft Axle with Two Drum Brakes for Trailer with Hot selling

China Professional 13t 16t Spoke Axle Trailer Spare Parts Boogie Suspension Steering Spider Axle Semi Trailer American Spoke Axle (08) with Good quality

China supplier Semi-Trailer American Style Axle/Long Track/10 Holes/High Quality/13000kgs Axle axle api

China OEM 16t Trailer Spoke Axle Spider Axle with 6 Studs with Good Price axle boot

China supplier Trailer Rear Axle of Germany Type 16t Axle Best Selling axle bolt

China Custom 420X200mm CZPT Axle in Bulk Chamber 3030 Trailer Axle cv axle replacement cost

China wholesaler 8 Ton 6 Ton 3 Tontrailer Axles for Sale Heavy Duty Boat Trailer Axles 94 Inch Trailer Axle axle shaft

automatic machine belt china machine china making machine china motor custom machine electric drive motor electric motor electric motor electric motor hydraulic machine machine automatic machine china manufacturer machine manufacturer making machine motor motor drive motor electric motor motor shaft

power source	USA Hper therm 105A power source
system	STARFIRE
Nesting Software	FASTCAM
Design Software	Auto Cad
Gross Power	21.8kw
Cutting Thickness	18mm
Voltage	Machine: 220V , Single Phase,Plasma source: 380V , 3 Phase
Cutting Speed	0-4000mm/min
Cutting mode	Plasma cutting
Drive Mode	Dual Drive Japan Servo motor

Product Description
Product Name	1+1 Mini Mask Machine
Certification	CE SGS ISO
Qualification Rate	98-99%
Equipment Efficiency	100-120pcs/min
Mask Specification	17595mm/14595mm
Equipment size	L:6100W2850H2100mm
Voltage	Single phase 220V 60HZ/50HZ
MOQ	1PCS
Machinery Test Report	Provied
Logo	Accept customization
ODM/OEM	Accept
Sample	A box of products produced by the mask machine
Lead time	5-7 days
Supply Ability	300 Sets Per/Month

Machinable materials
Steel	1018	Stainless Steel	17-4PH	Copper/Brass	110
	1045		302		145
	1050		303		147
	1117		304		314
	1141		316		316
	1144		321		360
	11L17		409		544
	11L41		410		624
	1215		416		Beryllium Copper
	12L14		420	Plastics	ABS
	4140		430		PC
	4142		440		PP
	41L40	Aluminum	2011		PEEK
	41L42		2571		PET
	8620		5052		PUM
	86L20		6061		PVC
	E52100		6063		Delron
	Fatigue proof		6082		Nylon
	Stress proof		6262		Te/flon
	Customized		7075		Celcon

name	C35-type high quality colored steel trapezoidal roll forming machine
roller station	19 roller stations or as customer requirement
roller diameters	80mm
size of machine	*101.651.45m*
weight	about 7 tons
main motor	5.5kw
voltage	380v
feeding Width	1250mm
roller Material	45#Steel
production Speed	10-16m/min
rolling Thinckness	0.3-0.8mm
control Sysem	PLC Automatic Control
after Warranty Service	Video technical support
effictive width	1000mm

Model	Rotate speed(r/m)	feeding size (mm)	Output size (mm)	Capacity (pcs/h)	Overall size(mm)	Blades
MX-200	16	170×140	below 20	100-200	845x550x1005	5pcs ¢1655520
MX-300	16	140×115	below 20	180-240	845x550x1005	8pcs ¢1655520

Type	China Color Steel Corrugated Steel Roll Forming Machine
Thickness Of Material	0.3-0.8mm
Frame Design	350H steel
Roll Stages	14 stages
Material Of Forming Roller	45# steel CNC Iathes Hard Chrome Coated
Shafts Diameter	70mm
Thickness Of Middle plate	16mm
Main Motor Power	4KW
Speed	13-15M/min
Electric Standard	380V/50HZ/3PH or as your need
Color of Machine	Blue or as your requirements

Model	SKX-01	SFX-05	SFX-09	SDB-102B
Carton Size	(200-500)L×(150-450)W×(150-350)Hmm
Working Speed	8-10 Ctn/Min
Arch Size				800*600mm
Power Supply	220V/1PH/50Hz
Weight	500Kgs	250Kgs	450Kgs	280Kgs
Air Pressure	0.6-0.8Mpa
Table Height	450+50mm

Forming area	500x220mm
Sealing area	500x140mm
Output	6-15 cycles/min. According the packaging material,blister shape,and sealing period.