Coupling sprockets are manufactured to ANSI B29 standards but have a smaller outside diameter and use a special tooth profile as shown in the photo below.
This tooth profile allows for the sprockets to seat the chain properly and run inside a coupling cover. It is always recommended to use an aluminum coupling chain cover when running roller chain couplings for safety, performance, and durability reasons. We standardly stock plain-bore, finished bore, and bushed style coupling sprockets.
#80 Chain Coupling Sprockets
This coupling sprocket/ coupling half is manufactured using high-quality steel and features heat-treated hardened teeth for the maximum torque ability, performance, and durability. Additionally it meets all ANSI standards and is bored to accept a Q type bushing.
- High Quality Sprocket
- Has Hardened Teeth
- Fully Meets ANSI Standards
- Easy To Install
sprocket Size | Stock Bore | Tooth Count | Hub Diameter (A) | Recommended Maximum RPM | Weight |
---|---|---|---|---|---|
8018 | 1-1/8″ | 18 | 4.563″ | 2000 | 5.3 LBS |
8018R | R | 18 | 4.563″ | 2000 | 5.3 LBS |
8018SF | SF | 18 | 4.563″ | 2000 | 5.3 LBS |
8018SK | SK | 18 | 4.563″ | 2000 | 5.3 LBS |
8020 | 2-5/8″ | 20 | 5.375″ | 2000 | 5.9 LBS |
8020TLH | 1-1/2″ | 20 | 5.375″ | 2000 | 5.9 LBS |
8020TLH | 3020 | 20 | 5.375″ | 2000 | 5.9 LBS |