China Hot selling Agricultural Machinery Tractor All Crop Combine Peanut Harvester with Great quality

Product Description

High Working Efficiency Peanut Harvester For Sale groundnut harvester Peanut Agriculture Machine

Product Description

peanut harvester machine for sale
1.Sealed cab,reduce the noise, make driver feel more comfortable.
2.Using centrifugal fan to feed grass, has good separation effect, and get cleaner forage.
3.The air current throwing mode is adopted for soil block cleaning,it prevents clogging and reduce the rate of broken peanut.
4.The machine has 2 tanks, 1 tank for the peanut, the other tank for the peanut stalk which will be crushed as forage.
5.Removing dust downward,reduce the dust to extend the working life.
6.The picker uses a double track to run smoothly,adopts the circulation mode picking device,improve picking efficiency.
7.The picker height ,roller speed and fan are visual by digital display.
8.Famous brand engine,optional 120/130/140hp, more powerful, more economical, more energy-saving, and more environment protection.
9.It adopts D3.5 type large clutch gearbox,which is reliable and durable.It has long clutch arm to save energy.
10.Rotary dust cover device to avoid water tank will be high temperature after long time working.
11.Bigger fuel tank;the endurance is longer.Optimize the dydraulic system of the whole machine with high reliability.
peanut harvester machine for sale

Self-propelled peanut picking and harvesting machine
Product model 4HJL-2.5 4HJL-2.5S
model H 2.5 H 2.5S
power (kw/hp) 110/150 110/150
Engine position Bias Bias
Pick up width (mm) 2500 2500
Dimensions  (mm) 6725× 2790 ×3420 6725× 2790 ×3420
Total Weight( kg) 5250 5250
productivity (hm2/h) 0.27~0.54 0.27~0.54
Picking form / quantity Longitudinal axial flow cutter teeth Longitudinal axial flow cutter teeth
Dimensions of peanut picking roller (mm) Φ710×2000 Φ710×2000
Grain tank capacity (m³) 2.35 2.35
Rear brake Standard /
Four-wheel drive / Standard
Optional Engine configuration Standard Changchai 152 horsepower engine Standard Changchai 152 horsepower engine
Optional CZPT 110kw/150hp engine plus usd470 Optional CZPT 110kw/150hp engine plus usd470
Optional Quanchai 110kw/150hp without price increase Optional Quanchai 110kw/150hp without price increase
Closed side subtraction Optional closed side reduction, an increase of usd470 Standard
Dust suppression device undetermined undetermined

peanut harvester machine for sale
Spares Parts 
Spares Parts Photos     peanut harvester machine for sale

Product Details of peanut harvester machine for sale

Certifications

Our company used advanced OEM operating model ,and owns perfect harvester parts outsourcing system and sales service network.The company has more than 300 sales service sits and 150 outsourcing factories across the country.

Corporate Honors of peanut harvester machine for sale

High-Tech Enterprise Science and Technology Enterprises of ZheJiang Province
Provincial Technology Center Municipal Enterprise Technology Center
Wheat Combine Harvester Technology Center 3.15 Quality Assurance Alliance
AA Enterprise Credit Evaluation 2017 Most Influential Brand In Agricultural Machinery Industry
Agricultural Industrialization Leading Enterprises E-commerce Leading Enterprises
Outstanding Private Enterprise Provincial Leading Enterprise Of Scientific And Technological Innovation
Provincial High Quality Products Quality Assurance & Best-selling Brand
Quality Management Advanced Enterprise Leading Enterprise In Mechanized Agriculture &Horticulture Equipment Manufacturing
Customer Satisfaction Top 10 Brands  Top 10 Technology Innovation Enterprises

 

Company Profile

HangZhou CZPT Harvest Machinery Co., Ltd is a professional combine harvester manufacturing company which integrates product research,spare parts producing ,complete machine assembling and product after-sale service. The company was founded in 1995.The company products has 7 series and in total more than 100 types which cover peanut harvester,wheat harvester,rice harvester,corn harvester ,soybean harvester ,corn seeds harvester and silage harvester.In international market,the products mainly are exported to South Asia,Southeast Asia,West Asia,Africe and Middle Europe.

After Sales Service

1.Training how to install and use the machine,engineers available to service machinery overseas.

2.Warranty period of 1 year since machine arrives destination port. Malfunctions which are caused by machine-self and quality will be responsible for our manufacturer. Other malfunctions which caused by operation mistakes, man-made problems, etc will be responsible for clients-self.

3. Timely response to customers’ problems 7*24 hours, provide in time Feedback tracking and after-sales services to maximize the customer’s satisfactory.

FAQ

Q1.How long is the delivery date?

A:In general, we can ship the goods within 15 days after receiving your payment. Of course, it also depends on your quantity.

Q2. How can I visit your factory?

A:We are located in HangZhou city,middle of China,Airport&High-speed train, the transportation is very convenient

Q3: What’s your main products?

A: Our products are covered rice&wheat combine harvester,corn harvester and peanut harvester.

Q4. What is your terms of payment?

A: T/T, L/C, Paypal,Western Union

Q 5: How is the quality of the harvesrter?

A : We are an experienced manufacturer which has been in this field for 30 more years, and can supply high quality harvesters for you.

 

Guide to Drive Shafts and U-Joints

If you’re concerned about the performance of your car’s driveshaft, you’re not alone. Many car owners are unaware of the warning signs of a failed driveshaft, but knowing what to look for can help you avoid costly repairs. Here is a brief guide on drive shafts, U-joints and maintenance intervals. Listed below are key points to consider before replacing a vehicle driveshaft.
air-compressor

Symptoms of Driveshaft Failure

Identifying a faulty driveshaft is easy if you’ve ever heard a strange noise from under your car. These sounds are caused by worn U-joints and bearings supporting the drive shaft. When they fail, the drive shafts stop rotating properly, creating a clanking or squeaking sound. When this happens, you may hear noise from the side of the steering wheel or floor.
In addition to noise, a faulty driveshaft can cause your car to swerve in tight corners. It can also lead to suspended bindings that limit overall control. Therefore, you should have these symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms above, your next step should be to tow your vehicle to a mechanic. To avoid extra trouble, make sure you’ve taken precautions by checking your car’s oil level.
In addition to these symptoms, you should also look for any noise from the drive shaft. The first thing to look for is the squeak. This was caused by severe damage to the U-joint attached to the drive shaft. In addition to noise, you should also look for rust on the bearing cap seals. In extreme cases, your car can even shudder when accelerating.
Vibration while driving can be an early warning sign of a driveshaft failure. Vibration can be due to worn bushings, stuck sliding yokes, or even springs or bent yokes. Excessive torque can be caused by a worn center bearing or a damaged U-joint. The vehicle may make unusual noises in the chassis system.
If you notice these signs, it’s time to take your car to a mechanic. You should check regularly, especially heavy vehicles. If you’re not sure what’s causing the noise, check your car’s transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can replace the driveshaft in your car.
air-compressor

Drive shaft type

Driveshafts are used in many different types of vehicles. These include four-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its own purpose. Below is an overview of the 3 most common types of drive shafts:
The driveshaft is a circular, elongated shaft that transmits torque from the engine to the wheels. Drive shafts often contain many joints to compensate for changes in length or angle. Some drive shafts also include connecting shafts and internal constant velocity joints. Some also include torsional dampers, spline joints, and even prismatic joints. The most important thing about the driveshaft is that it plays a vital role in transmitting torque from the engine to the wheels.
The drive shaft needs to be both light and strong to move torque. While steel is the most commonly used material for automotive driveshafts, other materials such as aluminum, composites, and carbon fiber are also commonly used. It all depends on the purpose and size of the vehicle. Precision Manufacturing is a good source for OEM products and OEM driveshafts. So when you’re looking for a new driveshaft, keep these factors in mind when buying.
Cardan joints are another common drive shaft. A universal joint, also known as a U-joint, is a flexible coupling that allows 1 shaft to drive the other at an angle. This type of drive shaft allows power to be transmitted while the angle of the other shaft is constantly changing. While a gimbal is a good option, it’s not a perfect solution for all applications.
CZPT, Inc. has state-of-the-art machinery to service all types of drive shafts, from small cars to race cars. They serve a variety of needs, including racing, industry and agriculture. Whether you need a new drive shaft or a simple adjustment, the staff at CZPT can meet all your needs. You’ll be back on the road soon!

U-joint

If your car yoke or u-joint shows signs of wear, it’s time to replace them. The easiest way to replace them is to follow the steps below. Use a large flathead screwdriver to test. If you feel any movement, the U-joint is faulty. Also, inspect the bearing caps for damage or rust. If you can’t find the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or poorly lubricated, it can quickly fail and cause your car to squeak while driving. Another sign that a joint is about to fail is a sudden, excessive whine. Check your u-joints every year or so to make sure they are in proper working order.
Whether your u-joint is sealed or lubricated will depend on the make and model of your vehicle. When your vehicle is off-road, you need to install lubricable U-joints for durability and longevity. A new driveshaft or derailleur will cost more than a U-joint. Also, if you don’t have a good understanding of how to replace them, you may need to do some transmission work on your vehicle.
When replacing the U-joint on the drive shaft, be sure to choose an OEM replacement whenever possible. While you can easily repair or replace the original head, if the u-joint is not lubricated, you may need to replace it. A damaged gimbal joint can cause problems with your car’s transmission or other critical components. Replacing your car’s U-joint early can ensure its long-term performance.
Another option is to use 2 CV joints on the drive shaft. Using multiple CV joints on the drive shaft helps you in situations where alignment is difficult or operating angles do not match. This type of driveshaft joint is more expensive and complex than a U-joint. The disadvantages of using multiple CV joints are additional length, weight, and reduced operating angle. There are many reasons to use a U-joint on a drive shaft.
air-compressor

maintenance interval

Checking U-joints and slip joints is a critical part of routine maintenance. Most vehicles are equipped with lube fittings on the driveshaft slip joint, which should be checked and lubricated at every oil change. CZPT technicians are well-versed in axles and can easily identify a bad U-joint based on the sound of acceleration or shifting. If not repaired properly, the drive shaft can fall off, requiring expensive repairs.
Oil filters and oil changes are other parts of a vehicle’s mechanical system. To prevent rust, the oil in these parts must be replaced. The same goes for transmission. Your vehicle’s driveshaft should be inspected at least every 60,000 miles. The vehicle’s transmission and clutch should also be checked for wear. Other components that should be checked include PCV valves, oil lines and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is best to have it serviced by CZPT’s East Lexington experts. These services should be performed every 2 to 4 years or every 24,000 miles. For best results, refer to the owner’s manual for recommended maintenance intervals. CZPT technicians are experienced in axles and differentials. Regular maintenance of your drivetrain will keep it in good working order.

China Hot selling Agricultural Machinery Tractor All Crop Combine Peanut Harvester     with Great qualityChina Hot selling Agricultural Machinery Tractor All Crop Combine Peanut Harvester     with Great quality