Product Description
SPECIFICATION
Center Lap Seal Pouch / Bag Making Machine Serious
Equipment | Center Lap Seal 350 | Center Lap Seal 450 | Center Lap Seal 600 |
Model | HD-350BTZ | HD-450BTZ | HD-600BTZ |
Max. Unwinding Width(mm) | 850 | 1050 | 1200 |
Max. Pouch Width(mm) | 350 | 450 | 600 |
Min. Pouch Height(mm) | 50 | ||
Max. Gusset Depth(mm) | 60 | ||
Max. Feeding Speed(m/min) | 45 | ||
Pouch Making Speed(pcs/min) | 120-200 Depends on specific condition of machine operating and material |
Center Lap & Fin Pouch / Bag Making Machine Serious
Equipment | Center Lap & Fin Seal 350 |
Center Lap & Fin Seal 450 |
Center Lap & Fin Seal 600 |
Model | HD-350BTQZ | HD-450BTQZ | HD-600BTQZ |
Max. Unwinding Width(mm) | 850 | 1050 | 1200 |
Max. Pouch Width(mm) | 350 | 450 | 600 |
Min. Pouch Height(mm) | 50 | ||
Max. Gusset Depth(mm) | 60 | ||
Max. Feeding Speed(m/min) | 45 | ||
Pouch Making Speed(pcs/min) | 120-200 Depends on specific condition of machine operating and material |
Center Seal Stand-Up Pouch / Bag Machine Serious
Equipment | Center Lap & Fin Seal 450 | Center Seal & Stand-up 600 | |
Model | HD-450BTZMML | HD-600BTZMML | |
Max. Unwinding Width(mm) | 1050 | 1200 | |
Max. Pouch Width(mm) | 450 | 600 | |
Min. Pouch Height(mm) | 30 | ||
Max. Gusset Depth(mm) | 60 | ||
Max. Feeding Speed(m/min) | 45 | ||
Pouch Making Speed(pcs/min) | 100-180 Depends on specific condition of machine operating and material |
3-Side Seal Pouch / Bag Making Machine Serious
Equipment | 3-Side Seal 600 | ||
Model | HD-600BU | ||
Max. Unwinding Width(mm) | 1200 | ||
Max. Pouch Width(mm) | 600 | ||
Min. Pouch Height(mm) | 30 | ||
Max. Feeding Speed(m/min) | 45 | ||
Pouch Making Speed(pcs/min) | 200 Depends on specific condition of machine operating and material |
3-Side Seal & Stand-Up Pouch / Bag Making Machine Serious
Equipment | 3-Side Seal & Stand-Up 600 | ||
Model | HD-600BUML | ||
Max. Unwinding Width(mm) | 1200 | ||
Max. Pouch Width(mm) | 600 | ||
Min. Pouch Height(mm) | 50 | ||
Max. Feeding Speed(m/min) | 45 | ||
Pouch Making Speed(pcs/min) | 100-180 Depends on specific condition of machine operating and material |
3-Side Seal & Stand-Up Plus Pouch / Bag Making Machine Serious
Equipment | 3-Side Seal & Stand-Up Plus 600 | ||
Model | HD-600BULL | ||
Max. Unwinding Width(mm) | 1200 | ||
Max. Pouch Width(mm) | 600 | ||
Min. Pouch Height(mm) | 50 | ||
Max. Feeding Speed(m/min) | 45 | ||
Pouch Making Speed(pcs/min) | 100-180 Depends on specific condition of machine operating and material |
3-Side Seal & Stand-Up Ultra Pouch / Bag Making Machine Serious
Equipment | 3-Side Seal & Stand-Up Ultra 850 |
3-Side Seal & Stand-Up Ultra 1100 |
3-Side Seal & Stand-Up Ultra 1250 |
Model | HD-850BU | HD-1100BU | HD-1250BU |
Max. Unwinding Width(mm) | 1500 Single Unwiding | 1100 Double Unwiding | 1250 Double Unwiding |
Max. Pouch Width(mm) | 850 | 1100 | 1250 |
Min. Pouch Height(mm) | 50 | ||
Max. Feeding Speed(m/min) | 45 | ||
Pouch Making Speed(pcs/min) | 120-180 Depends on specific condition of machine operating and material |
Flat Bottom Pouch / Bag Making Machine Serious
Equipment | Flat Bottom 600 | ||
Model | HD-600BF | ||
Max. Unwinding Width(mm) | 1200 | ||
Max. Feeding Speed(m/min) | 45 | ||
Pouch Making Speed(pcs/min) | 90-110 Depends on specific condition of machine operating and material |
As a technology-based company with independent R&D and manufacturing capabilities, Tie Min’s founding team already has extensive experience in the flexible packaging industry more earlier before its establishement in 2001, which makes Tie Min can design and produce the bag / pouch machine from the perspective of customers – we came from the customers, and we are going back to the customers, we know flexible packaging industry better, so can make pouch / bag making machine right.After more than 20 years of continuous development in the industry, Tie Min has accumulated a wealth of experience in designing, technical and economic evaluation, manufacturing, installation, commissioning, staff training, and after-sales service, and have been striving to create lasting relationships with customers all over the world, guarantee that they can count on us for CZPT pricing and quality with zero hassle, which is based on a complete set of production and testing equipment, a perfect managment of supply chain, as well as a group of highly qualified professional technicians of designing, construction, and manufacturing.
Tie Min Machine is dedicated to helping customers get the most right solutions of flexible packaging.
Let us know what we can do for your business by leaving us a message. We’re here to make sure you don’t have to worry about anything.
Features: · PLC Controlled Pneumatic Locking Unwinding System integrated with extra EPC to achieve more precise control and more stable feeding – Pouch Making Speed and Yield Rate Guaranteed · Multiple Photoelectric Sensors and Mechanical Limits are applied to the material with and without printing to achieve production with different materials in just 1 machine – Early Investment Minimized · CRT Touch Screen with Remote Diagnostic and Restoration Function, plus a full set of manual CZPT and mature after-sales service -Convenience of machine operation guaranteed · Multiple auto-running functions available, such as Auto counting, Hole Punching/ Length Measuring / Sealing Speed Setting, making it possible for multiple machines controlled by just 1 man – Labour Cost Minimized · Mature Warning and Auto Stop System avoid loss caused by Temperature Lossing, Abnormal Unwinding and Feeding, Photoelectric Sensor and Servo Motor Going Down, etc. to Minimize Material Waste – Production costs Minimized FAQ Q:Are you factory or trading company? A:We are an original FACTORY specializing in designing, manufacturing, and customizing pouch bag making machines for over 20 years, we sincerely and warmly welcome all kinds of clients including the end customers, dealers, and sole agencies discuss with us about all forms of cooperation. Q:Where is your factory located? A:We are located in HangZhou City, 2 hours from ZheJiang by train or car, and 3 hours from HangZhou by air. Q: What kind of pouch bags can your machine make? A:The regular machine types we are selling can produce varieties of laminated pouches/bags, including but not limited to the following bag types: 2-Side seal pouch bag, 3-Side seal pouch bag, 4-Side seal pouch bag; Lap seal pouch bag, Fin seal pouch bag; Side gusset pouch bag, Bottom gusset pouch bag; Center seal pouch bag, Side seal pouch bag, Bottom seal pouch bag; Flat bottom pouch bag / Plough bottom pouch bag; K Seal pouch bag / Skirt seal pouch bag; Round bottom pouch bag / Doyen bag / Doypack; Corner bottom pouch bag / Plow bottom pouch bag/ Folded bottom pouch bag. We will be very glad to discuss with our clients if they have any special demand for packing solutions, providing them with varieties of customization. Q: What kinds of pouch bag material are available for your machine? A: Our machines can produce laminated pouch bags made with varieties of material, including Aluminum and Plastic like PET, BOPET, OPP, BOPP, LDPE, HDPE, PA, and so on, any special demands of material will be welcome to be discussed with us, we will be glad to help our customers to get the right packing solutions. Q:What’s your after-sale service policy? A:6 months warranty for electronic components + 12 months warranty for mechanical parts. On-site installation and adjustment or remote guidance via the internet Employee technical training Repair and Technical Support Q: What certification do you have? A: With the cooperation of a responsible production management team and an experienced technical team, we have obtained ISO9001 certification from UKAS and CE certification from SGS, and have independently developed more than 30 patents in the past 20 years.
The Functions of Splined Shaft Bearings
Splined shafts are the most common types of bearings for machine tools. They are made of a wide variety of materials, including metals and non-metals such as Delrin and nylon. They are often fabricated to reduce deflection. The tooth profile will become deformed with time, as the shaft is used over a long period of time. Splined shafts are available in a huge range of materials and lengths.
Functions
Splined shafts are used in a variety of applications and industries. They are an effective anti-rotational device, as well as a reliable means of transmitting torque. Other types of shafts are available, including key shafts, but splines are the most convenient for transmitting torque. The following article discusses the functions of splines and why they are a superior choice. Listed below are a few examples of applications and industries in which splines are used.
Splined shafts can be of several styles, depending on the application and mechanical system in question. The differences between splined shaft styles include the design of teeth, overall strength, transfer of rotational concentricity, sliding ability, and misalignment tolerance. Listed below are a few examples of splines, as well as some of their benefits. The difference between these styles is not mutually exclusive; instead, each style has a distinct set of pros and cons.
A splined shaft is a cylindrical shaft with teeth or ridges that correspond to a specific angular position. This allows a shaft to transfer torque while maintaining angular correspondence between tracks. A splined shaft is defined as a cylindrical member with several grooves cut into its circumference. These grooves are equally spaced around the shaft and form a series of projecting keys. These features give the shaft a rounded appearance and allow it to fit perfectly into a grooved cylindrical member.
While the most common applications of splines are for shortening or extending shafts, they can also be used to secure mechanical assemblies. An “involute spline” spline has a groove that is wider than its counterparts. The result is that a splined shaft will resist separation during operation. They are an ideal choice for applications where deflection is an issue.
A spline shaft’s radial torsion load distribution is equally distributed, unless a bevel gear is used. The radial torsion load is evenly distributed and will not exert significant load concentration. If the spline couplings are not aligned correctly, the spline connection can fail quickly, causing significant fretting fatigue and wear. A couple of papers discuss this issue in more detail.
Types
There are many different types of splined shafts. Each type features an evenly spaced helix of grooves on its outer surface. These grooves are either parallel or involute. Their shape allows them to be paired with gears and interchange rotary and linear motion. Splines are often cold-rolled or cut. The latter has increased strength compared to cut spines. These types of shafts are commonly used in applications requiring high strength, accuracy, and smoothness.
Another difference between internal and external splined shafts lies in the manufacturing process. The former is made of wood, while the latter is made of steel or a metal alloy. The process of manufacturing splined shafts involves cutting furrows into the surface of the material. Both processes are expensive and require expert skill. The main advantage of splined shafts is their adaptability to a wide range of applications.
In general, splined shafts are used in machinery where the rotation is transferred to an internal splined member. This member can be a gear or some other rotary device. These types of shafts are often packaged together as a hub assembly. Cleaning and lubricating are essential to the life of these components. If you’re using them on a daily basis, you’ll want to make sure to regularly inspect them.
Crowned splines are usually involute. The teeth of these splines form a spiral pattern. They are used for smaller diameter shafts because they add strength. Involute splines are also used on instrument drives and valve shafts. Serration standards are found in the SAE. Both kinds of splines can also contain a ball bearing for high torque. The difference between the 2 types of splines is the number of teeth on the shaft.
Internal splines have many advantages over external ones. For example, an internal spline shaft can be made using a grinding wheel instead of a CNC machine. It also uses a more accurate and economical process. Furthermore, it allows for a shorter manufacturing cycle, which is essential when splining high-speed machines. In addition, it stabilizes the relative phase between the spline and thread.
Manufacturing methods
There are several methods used to fabricate a splined shaft. Key and splined shafts are constructed from 2 separate parts that are shaped in a synchronized manner to transfer torque uniformly. Hot rolling is 1 method, while cold rolling utilizes low temperatures to form metal. Both methods enhance mechanical properties, surface finishes, and precision. The advantage of cold rolling is its cost-effectiveness.
Cold forming is 1 method, as well as machining and assembling. Cold forming is a unique process that allows the spline to be shaped to the desired shape. The resulting shape provides maximum contact area and torsional strength. Standard splines are available in standard sizes, but custom lengths can also be ordered. CZPT offers various auxiliary equipment, such as mating sleeves and flanged bushings.
Cold forging is another method. This method produces long splined shafts that are used in automobile propellers. After the spline portion is cut out, it is worked on in a hobbing machine. Work hardening enhances the root strength of the splined portion. It can be used for bearings, gears, and other mechanical components. Listed below are the manufacturing methods for splined shafts.
Parallel splines are the simplest of the splined shaft manufacturing methods. Parallel splines are usually welded to shafts, while involute splines are made of metal or non-metals. Splines are available in a wide variety of lengths and materials. The process is usually accompanied by a process called milling. The workpiece rotates to produce the serrated surface.
Splines are internal or external grooves in a splined shaft. They work in combination with keyways to transfer torque. Male and female splines are used in gears. Female and male splines correspond to 1 another to ensure proper angular correspondence. Involute splines have more surface area and thus are stronger than external splines. Moreover, they help the shaft fit into a grooved cylindrical member without misalignment.
A variety of other methods of manufacturing a splined shaft can be used to produce a splined shaft. Spline shafts can be produced using broaching and shaping, 2 precision machining methods. Broaching uses a metal tool with successively larger teeth to remove metal and create ridges and holes in the surface of a material. However, this process is expensive and requires special expertise.
Applications
The splined shaft is a mechanical component with a helix-like shape formed by the equal spacing of grooves in a circular ring. The splines can either have parallel or involute sides. The splines minimize stress concentration in stationary joints and can be used in both rotary and linear motion. In some cases, splines are rolled rather than cut. The latter is more durable than cut splines and is often used in applications requiring high strength, accuracy, and smooth finish.
Splined shafts are commonly made of carbon steel. This alloy steel has a low carbon content, making it easy to work with. Carbon steel is a great choice for splines because it is malleable. Generally, high-quality carbon steel provides a consistent motion. Steel alloys are also available that contain nickel, chromium, copper, and other metals. If you’re unsure of the right material for your application, you can consult a spline chart.
Splines are a versatile mechanical component. They are easy to cut and fit. Splines can be internal or external, with teeth positioned at equal intervals on both sides of the shaft. This allows the shaft to engage with the hub around the entire circumference of the hub. It also increases load capacity by creating a constant multiple-tooth point of contact with the hub. For this reason, they’re used extensively in rotary and linear motion.
Splined shafts are used in a wide variety of industries. CZPT Inc. offers custom and standard splined shafts for a variety of applications. When choosing a splined shaft for a specific application, consider the surrounding mated components, torque requirements, and size requirements. These 3 factors will make it the ideal choice for your rotary equipment. And you’ll be pleased with the end result!
There are many types of splines and their applications are endless. They transfer torque and angular misalignment between parts, and they also enable the axial rotation of assembled components. Therefore, splines are an essential component of machinery and are used in a wide range of applications. This type of shaft can be found in various types of machines, from household appliances to industrial machinery. So, the next time you’re looking for a splined shaft, make sure you look for a splined one.