Product Description

Manufacturer Cutter Suction Sand Mud in River Port Government Tender Bangladesh Hydraulic /Electric Drive

1) Products Profile:
Cutter Suction Dredger is self-propelled or non self-propelled, portable cutter dredger. Hull can be dismantled and re-assemble easily with box structure, equipped with horizontal shifting devices, cutter ladder lifting devices, spud devices, deck crane and so on. Widly used in sand-excavaing, river dredging, desiliting , reclamation for channels and land, port construction, etc.

1. Wide range of use applications
2. High efficiency, large output, long pump distance, low fuel consumption
3. Rexroth, CZPT full hydraulic control 
4. Siemens PLC is easy to operate
5. Engine choiced from Weichai, Cummins, Caterpillar and more. 
6. Equipped with Australian Warman technology dredge pump
7. The modular design enables fast assembly with HID seniors engineers 
8. Dredger components available in factories to allow short delivery times 
9. Control the working process of dredging and pumping, delivering dredged materials. lower cost;
10. Follow manufacture guideline: CCS-ZC standard
11. CE ISO certificates acquired to prove high quality 
12. Western Dredge brand parts, easy to find globally 
13. Can choose reliable Chinese brand parts to lower costs 
14. Gain access to our sales team, design team, manufacture team 24/7
15. Lifetime Technical Assistance 

2) Technical specification

(1) Brief Specification of hot selling model:

Model	Sand and solid capacity	Max. dredging depth	Discharge distance
HJ 200	160m3/h	8m	800m
HJ 250	200 m3/h	9m	1000m
HJ 300	300 m3/h	10m	1200m
HJ 350	400 m3/h	11m	1500m
HJ 400	500 m3/h	13m	1500m
HJ 450	600 m3/h	14m	1500m
HJ 500	800 m3/h	15m	2000m
HJ 550	900 m3/h	16m	2000m
HJ 600	1100 m3/h	16m	2000m
HJ 650	1200 m3/h	16m	2100m
HJ 700	1400 m3/h	17m	2200m
HJ 800	1500 m3/h	17m	2500m
HJ 300D	500 m3/h	16m	1500m
HJ 400D	825 m3/h	22m	1500m
HJ 500D	1000 m3/h	25m	2000m
HJ 600D	1800 m3/h	25m	2000m
HJ 700D	2250 m3/h	28m	2500m
HJ 800D	2400 m3/h	30m	2500m

(2) Detail specification of model HJ300:

Model	HJ300
LOA	26.0m
Hull size (L*B*H)	19.0*6.2*2.0m
Main pontoon (L*B*H)	19.0*2.2*2.0m
Side Pontoon (L*B*H)	16.0*2.0*2.0m
Structure	Box-structure
Main engine brand & power	Cummins 477kw
Auxiliary engine brand & power	Cummins 224kw
Head	40m
Max. dredging depth	10m
water flow	1500m³/h
Solid sand capacity	300m³/h
Discharge Distance	1200m
Draught	1.3m
Total Weight	70T

★ All these parameters are just for reference. We can provide the machine according to your different requirements.

3) Dredgers Production in Workshop:

4) Haijie Dredgers Parts:

5) Packing &Shipping:
* Smaller size dredger will be transported by container, and engineers will go to job site to assembly, testing and training.
* Bigger size dredger with diapatchable constructure, will be transported by trailer truck on land and by bulk cargo ship by sea.

6) Aftersale Service:
1.Profestional people serve the technical consult.
2.All the dredgers can be coustomed.
3.We are factory which can provide the higher quality and lower price.
4.Free field Installation,commissioning,training and and free product drawings.
5.Provide professional service and providesolution in a timely manner.
6.Free repair if quality problems happen.
7. Responsible Sales team, design team, manufacture team available 24/7 to best serve clients 
8. Offering spare parts at a discounted price 

7) Company Information:
HangZhou HAIJIE Machinery Equipment Co.,Ltd is a famous manufacter of engineering equipment in China and even in the world,which is mainly engaged in cutter suction  dredger,dredging machine and sand dredging machine.The compony has more than 100employees,with intenal organizatin inteqrity,advanced management methods. 

8) Customer Visiting:

9) FAQ:

Q: Are you trading company or manufacturer ? 
A: We are factory.

Dredger Sand Suction machine for river dredging

Q: I never used this kind of machine, how should i do?

A:Our engineers will CZPT you in the installation and use, and we will offer english manual and CZPT video.
And when our enginner install for you abroad, they will train your staff for free.

Dredger Sand Suction machine for river dredging

Q: Warranty period?

A:We provide 1 year warranty and free repair .We will send you the broken parts in warranty period. Pls feel free to contact me by Email/Skype/Whatsapp 24hours.

Q2, What are the services the Haijie company is providing?
 
A: Free dredger consultation, drawing design, customization, on-site visits, 24/7 availability, free assembly, training, operation testing, and lifetime technical assistance.

10)Certificates:

11)Contact Information:

 If you need further information about our products, please send your message to me in below form. 

What Are Screw Shaft Threads?

A screw shaft is a threaded part used to fasten other components. The threads on a screw shaft are often described by their Coefficient of Friction, which describes how much friction is present between the mating surfaces. This article discusses these characteristics as well as the Material and Helix angle. You’ll have a better understanding of your screw shaft’s threads after reading this article. Here are some examples. Once you understand these details, you’ll be able to select the best screw nut for your needs.

Coefficient of friction between the mating surfaces of a nut and a screw shaft

There are 2 types of friction coefficients. Dynamic friction and static friction. The latter refers to the amount of friction a nut has to resist an opposing motion. In addition to the material strength, a higher coefficient of friction can cause stick-slip. This can lead to intermittent running behavior and loud squeaking. Stick-slip may lead to a malfunctioning plain bearing. Rough shafts can be used to improve this condition.
The 2 types of friction coefficients are related to the applied force. When applying force, the applied force must equal the nut’s pitch diameter. When the screw shaft is tightened, the force may be removed. In the case of a loosening clamp, the applied force is smaller than the bolt’s pitch diameter. Therefore, the higher the property class of the bolt, the lower the coefficient of friction.
In most cases, the screwface coefficient of friction is lower than the nut face. This is because of zinc plating on the joint surface. Moreover, power screws are commonly used in the aerospace industry. Whether or not they are power screws, they are typically made of carbon steel, alloy steel, or stainless steel. They are often used in conjunction with bronze or plastic nuts, which are preferred in higher-duty applications. These screws often require no holding brakes and are extremely easy to use in many applications.
The coefficient of friction between the mating surfaces of t-screws is highly dependent on the material of the screw and the nut. For example, screws with internal lubricated plastic nuts use bearing-grade bronze nuts. These nuts are usually used on carbon steel screws, but can be used with stainless steel screws. In addition to this, they are easy to clean.

Helix angle

In most applications, the helix angle of a screw shaft is an important factor for torque calculation. There are 2 types of helix angle: right and left hand. The right hand screw is usually smaller than the left hand one. The left hand screw is larger than the right hand screw. However, there are some exceptions to the rule. A left hand screw may have a greater helix angle than a right hand screw.
A screw’s helix angle is the angle formed by the helix and the axial line. Although the helix angle is not usually changed, it can have a significant effect on the processing of the screw and the amount of material conveyed. These changes are more common in 2 stage and special mixing screws, and metering screws. These measurements are crucial for determining the helix angle. In most cases, the lead angle is the correct angle when the screw shaft has the right helix angle.
High helix screws have large leads, sometimes up to 6 times the screw diameter. These screws reduce the screw diameter, mass, and inertia, allowing for higher speed and precision. High helix screws are also low-rotation, so they minimize vibrations and audible noises. But the right helix angle is important in any application. You must carefully choose the right type of screw for the job at hand.
If you choose a screw gear that has a helix angle other than parallel, you should select a thrust bearing with a correspondingly large center distance. In the case of a screw gear, a 45-degree helix angle is most common. A helix angle greater than zero degrees is also acceptable. Mixing up helix angles is beneficial because it allows for a variety of center distances and unique applications.

Thread angle

The thread angle of a screw shaft is measured from the base of the head of the screw to the top of the screw’s thread. In America, the standard screw thread angle is 60 degrees. The standard thread angle was not widely adopted until the early twentieth century. A committee was established by the Franklin Institute in 1864 to study screw threads. The committee recommended the Sellers thread, which was modified into the United States Standard Thread. The standardized thread was adopted by the United States Navy in 1868 and was recommended for construction by the Master Car Builders’ Association in 1871.
Generally speaking, the major diameter of a screw’s threads is the outside diameter. The major diameter of a nut is not directly measured, but can be determined with go/no-go gauges. It is necessary to understand the major and minor diameters in relation to each other in order to determine a screw’s thread angle. Once this is known, the next step is to determine how much of a pitch is necessary to ensure a screw’s proper function.
Helix angle and thread angle are 2 different types of angles that affect screw efficiency. For a lead screw, the helix angle is the angle between the helix of the thread and the line perpendicular to the axis of rotation. A lead screw has a greater helix angle than a helical one, but has higher frictional losses. A high-quality lead screw requires a higher torque to rotate. Thread angle and lead angle are complementary angles, but each screw has its own specific advantages.
Screw pitch and TPI have little to do with tolerances, craftsmanship, quality, or cost, but rather the size of a screw’s thread relative to its diameter. Compared to a standard screw, the fine and coarse threads are easier to tighten. The coarser thread is deeper, which results in lower torques. If a screw fails because of torsional shear, it is likely to be a result of a small minor diameter.

Material

Screws have a variety of different sizes, shapes, and materials. They are typically machined on CNC machines and lathes. Each type is used for different purposes. The size and material of a screw shaft are influenced by how it will be used. The following sections give an overview of the main types of screw shafts. Each 1 is designed to perform a specific function. If you have questions about a specific type, contact your local machine shop.
Lead screws are cheaper than ball screws and are used in light-duty, intermittent applications. Lead screws, however, have poor efficiency and are not recommended for continuous power transmission. But, they are effective in vertical applications and are more compact. Lead screws are typically used as a kinematic pair with a ball screw. Some types of lead screws also have self-locking properties. Because they have a low coefficient of friction, they have a compact design and very few parts.
Screws are made of a variety of metals and alloys. Steel is an economical and durable material, but there are also alloy steel and stainless steel types. Bronze nuts are the most common and are often used in higher-duty applications. Plastic nuts provide low-friction, which helps reduce the drive torques. Stainless steel screws are also used in high-performance applications, and may be made of titanium. The materials used to create screw shafts vary, but they all have their specific functions.
Screws are used in a wide range of applications, from industrial and consumer products to transportation equipment. They are used in many different industries, and the materials they’re made of can determine their life. The life of a screw depends on the load that it bears, the design of its internal structure, lubrication, and machining processes. When choosing screw assemblies, look for a screw made from the highest quality steels possible. Usually, the materials are very clean, so they’re a great choice for a screw. However, the presence of imperfections may cause a normal fatigue failure.

Self-locking features

Screws are known to be self-locking by nature. The mechanism for this feature is based on several factors, such as the pitch angle of the threads, material pairing, lubrication, and heating. This feature is only possible if the shaft is subjected to conditions that are not likely to cause the threads to loosen on their own. The self-locking ability of a screw depends on several factors, including the pitch angle of the thread flank and the coefficient of sliding friction between the 2 materials.
One of the most common uses of screws is in a screw top container lid, corkscrew, threaded pipe joint, vise, C-clamp, and screw jack. Other applications of screw shafts include transferring power, but these are often intermittent and low-power operations. Screws are also used to move material in Archimedes’ screw, auger earth drill, screw conveyor, and micrometer.
A common self-locking feature for a screw is the presence of a lead screw. A screw with a low PV value is safe to operate, but a screw with high PV will need a lower rotation speed. Another example is a self-locking screw that does not require lubrication. The PV value is also dependent on the material of the screw’s construction, as well as its lubrication conditions. Finally, a screw’s end fixity – the way the screw is supported – affects the performance and efficiency of a screw.
Lead screws are less expensive and easier to manufacture. They are a good choice for light-weight and intermittent applications. These screws also have self-locking capabilities. They can be self-tightened and require less torque for driving than other types. The advantage of lead screws is their small size and minimal number of parts. They are highly efficient in vertical and intermittent applications. They are not as accurate as lead screws and often have backlash, which is caused by insufficient threads.