Product Description
Our Advantages
Sales rank:China’s top three.
Sample: Support sample order.
OEM: Support technical changes.
Free train: plant training on installation and maintenance techniques.
QC: Quality inspection before delivery for each unit.
Our Catalog
Product Description
| We have many models about the machine, if you are interested, we will send the catalogue and details for you, please send the enquiry.thanks. |
Our have multiple models Four wheel tractor of power.#12HP #15HP #18HP #20HP #22HP #25HP #28HP #30HP #35HP #40HP #45HP #50HP #60HP #70HP.
Farm tractor diesel engine has simple and compact structure, manipulate, light weight, can be widely used for various field. like small farmland, vineyards, flower garden, greenhouse particularly ideal for mountainous field.
HangZhou LANSU TRACTOR
#12HP #15HP #18HP #20HP #22HP #25HP #28HP #30HP #35HP ,
multifunction, reliable quality, affordable
Can be equipped with variety of agricultural tools for different farming works
Famous and high-quality engine, strengthen chassis, strong power
Power emission upgrade, more advanced performance, low fuel consumption, high reliability
Easy operation, few maintenance
Can design and produce the tractors in OEM
Multi cylinder tractor
#25HP #28HP #30HP #35HP #40HP #45HP #50HP #60HP #70HP.
HangZhou Lansu ,tractor use famous s brand front drive axle so that quality is highly reliable.
Adopting a new type of high pressure lifter makes the work more convenient and flexible.
Equipped with external double oil cylinders, the working effect is better.
Product Parameters
| MODEL | LS-Mini tractor 12hp | ||
| Engine | Model | 195 | |
| Type | 1cylinder,4-stroke,horizontal,water-cooled,diesel | ||
| Cooling Mode | Condenser (Radiator) | ||
| Power | 12hp | ||
| Combustion System | Direct Injection | ||
| Cylinder Bore | 92mm | ||
| Piston Stroke | 95mm | ||
| Compression Ratio | 18:01 | ||
| Rated Speed | 2400rpm | ||
| Fuel Efficiency: | ≤257gl/kw.hr | ||
| Displacement | 0.632 | ||
| Fuel Tank Capacity | 8L | ||
| Water Tank Capacity | 2L | ||
| Net Weight | 112kg | ||
| Gross Weight | 122 | ||
| Overall dimensions:(L×W×H) | 2140×905×1175mm Without tiller | ||
| Overall dimensions:(L×W×H) | 2600×1000×1175mm With tiller | ||
| Front wheel size | 5.00-12 | ||
| Back wheel size | 7.50-16 | ||
| Ground clearance | 180mm | ||
| Working weight | 490kg | ||
| Transmission style | Belt transmission | ||
| Steering style | Steering wheel power steering system | ||
| Brakes | Two side wheel brake | ||
| Starter | Electric start/Hand crank | ||
| Seat | Adjustable | ||
| Gear style | (3+1)*2; 6 Forward, 2 Reverse | ||
| Speed | Forward | 1.68, 2.61, 4.22, 6.79, 10.57, 17.08 | |
| Reverse | 1.29, 5.22 | ||
| Rotary tiller | Transmission Type | Middle Gears Transmission, or side gears transmission | |
| Width | 1000mm Adjustable | ||
| Number of blades | 18-20pcs | ||
| Working depth | 150-250mm | ||
| Up and down control | Hydraulic system | ||
| Model | LS-Small tractor 25hp | ||
| Wheel drive | 4×2 | ||
| Dimensions | 2700×1400×1400 | ||
| Weight(kg) | 950-1571 | ||
| Front wheel(mm) | 900,1000,1100,1200 adjustable | ||
| Rear wheel(mm) | 960,1000,1100,1200,1300 adjustable | ||
| Wheel base(mm) | 1400 | ||
| Min. ground distance(mm) | 350 | ||
| Gear shift | 6+1 | ||
| Tyre size | 9.5-20/500-14 | ||
| ENGINE Type | |||
| Rated power(kW) | 18.32kw | ||
| Rated speed (r/min) | Water cooled,vertical,4 stoke and direct injection | ||
| Start | Electric | ||
| Transmission | 2200 | ||
| Clutch | single ,dry friction, single clutch | ||
| Connection/PTO | 3×2+1 | ||
| 3 point suspension/ Rear P.T.O 540 | |||
| MODEL | LS- Middle tractor 50hp | ||
| Horsepower&Drive Type | 50hp, 4×4 | ||
| ENGINE | |||
| Engine Model | 50HP | ||
| Type | Vertical, Water-Cooled, Four Strokes, Direct in Injection | ||
| Rated Output(kW) | 36.8 | ||
| TRACTOR PARAMETER | |||
| Dimension L*W*H (mm) | 3558*1500*2245 | ||
| Wheel Base (mm) | 1900 | ||
| Wheel Tread F/R(mm) | 1060/1100 | ||
| Min Ground Clearance(mm) | 300 | ||
| TRANSMISSION | |||
| Gear Shift | 8F+2R | ||
| Clutch Type | Dry Single-stage | ||
| RUNNING SYSTEM | |||
| Tire F/R | 650-16/11.2-24 | ||
| Steering | Hydraulic Steering | ||
| Brake | Toe Type | ||
| Park Brake | Latch Pedal | ||
| WORKING SYSTEM | |||
| Hitch | Partial Separated Type, 3-Point hydraulic hitch,Category 1 | ||
| Max. Lift Force(N) | ≥6300 | ||
| Rear PTO | Rear Rectangle Spline, 6 Teeth, 540/720rpm | ||
Accessories and Tools
Farming tools for Farm tractor
Farm tractor is a all-powerful agricultural machinery.lt can help farmers land consolidation (plought,rotary tillaqe, scarification,ditching,ridqing, earth up,grass mower Paddy field beating etc).
Crop planting and seeders (wheat, , corn, soybean seed, peanut, planting potatoes, vegetables eto Harvest (rice, wheat harvest, corn , peanut, potatoes, sweet potato Onions, ginger, qarlic).
The other management of land, water, spray, fertilization, paddy field operation etc).
Packaging & Shipping
Company Profile
With more than 20 years of industry experiences, our international trade headquarters located in port city -HangZhou, machines produced in HangZhou, HangZhou, HangZhou, ZheJiang China. There are 7 series with over 60 various of farming machines available including power tiller, walking tractor, 4 wheel tractor, spray machine, thresher and supporting farm tools,such as rotary tiller,plow,harrow,front loader,backhoe,grass bander, trailer,pump,corn planter,corn harvester and reaper. Already passed the international certification agency -S G S certification,technical person can be sent abroad. In the field of farming machinery,we can meet diverse customer needs by advanced technology and most popular agricultural machine.Exported to more than 40 countries especially South America,eastern Europe,middle america and we are quality supplier of assistance to agricultural machinery project in africa. with prefect One-stop agricultural machinery products service system we get nice reputation. We are committed to creating benefit for our customers and our goal is to allow farmers in the world to enjoy reliable, quality, affordable complete set of agricultural machines.
3. Our commitments:
a. With us, your funds is safe.
b. At least 12 months warranty, quality inspection before shipment.
c. Factory direct supply farming machinery and support you earning more money.
d. Near the port, rapid production and without M O Q, on time delivery.
e. OEM available, providing customized feature machine to enlarge market share.
f. Quick answer in 10 minutes.
Affordable price, reliable quality, enjoys farming.
Worm Gear Motors
Worm gear motors are often preferred for quieter operation because of the smooth sliding motion of the worm shaft. Unlike gear motors with teeth, which may click as the worm turns, worm gear motors can be installed in a quiet area. In this article, we will talk about the CZPT whirling process and the various types of worms available. We’ll also discuss the benefits of worm gear motors and worm wheel.
worm gear
In the case of a worm gear, the axial pitch of the ring pinion of the corresponding revolving worm is equal to the circular pitch of the mating revolving pinion of the worm gear. A worm with 1 start is known as a worm with a lead. This leads to a smaller worm wheel. Worms can work in tight spaces because of their small profile.
Generally, a worm gear has high efficiency, but there are a few disadvantages. Worm gears are not recommended for high-heat applications because of their high level of rubbing. A full-fluid lubricant film and the low wear level of the gear reduce friction and wear. Worm gears also have a lower wear rate than a standard gear. The worm shaft and worm gear is also more efficient than a standard gear.
The worm gear shaft is cradled within a self-aligning bearing block that is attached to the gearbox casing. The eccentric housing has radial bearings on both ends, enabling it to engage with the worm gear wheel. The drive is transferred to the worm gear shaft through bevel gears 13A, 1 fixed at the ends of the worm gear shaft and the other in the center of the cross-shaft.
worm wheel
In a worm gearbox, the pinion or worm gear is centered between a geared cylinder and a worm shaft. The worm gear shaft is supported at either end by a radial thrust bearing. A gearbox’s cross-shaft is fixed to a suitable drive means and pivotally attached to the worm wheel. The input drive is transferred to the worm gear shaft 10 through bevel gears 13A, 1 of which is fixed to the end of the worm gear shaft and the other at the centre of the cross-shaft.
Worms and worm wheels are available in several materials. The worm wheel is made of bronze alloy, aluminum, or steel. Aluminum bronze worm wheels are a good choice for high-speed applications. Cast iron worm wheels are cheap and suitable for light loads. MC nylon worm wheels are highly wear-resistant and machinable. Aluminum bronze worm wheels are available and are good for applications with severe wear conditions.
When designing a worm wheel, it is vital to determine the correct lubricant for the worm shaft and a corresponding worm wheel. A suitable lubricant should have a kinematic viscosity of 300 mm2/s and be used for worm wheel sleeve bearings. The worm wheel and worm shaft should be properly lubricated to ensure their longevity.
Multi-start worms
A multi-start worm gear screw jack combines the benefits of multiple starts with linear output speeds. The multi-start worm shaft reduces the effects of single start worms and large ratio gears. Both types of worm gears have a reversible worm that can be reversed or stopped by hand, depending on the application. The worm gear’s self-locking ability depends on the lead angle, pressure angle, and friction coefficient.
A single-start worm has a single thread running the length of its shaft. The worm advances 1 tooth per revolution. A multi-start worm has multiple threads in each of its threads. The gear reduction on a multi-start worm is equal to the number of teeth on the gear minus the number of starts on the worm shaft. In general, a multi-start worm has 2 or 3 threads.
Worm gears can be quieter than other types of gears because the worm shaft glides rather than clicking. This makes them an excellent choice for applications where noise is a concern. Worm gears can be made of softer material, making them more noise-tolerant. In addition, they can withstand shock loads. Compared to gears with toothed teeth, worm gears have a lower noise and vibration rate.
CZPT whirling process
The CZPT whirling process for worm shafts raises the bar for precision gear machining in small to medium production volumes. The CZPT whirling process reduces thread rolling, increases worm quality, and offers reduced cycle times. The CZPT LWN-90 whirling machine features a steel bed, programmable force tailstock, and five-axis interpolation for increased accuracy and quality.
Its 4,000-rpm, 5-kW whirling spindle produces worms and various types of screws. Its outer diameters are up to 2.5 inches, while its length is up to 20 inches. Its dry-cutting process uses a vortex tube to deliver chilled compressed air to the cutting point. Oil is also added to the mixture. The worm shafts produced are free of undercuts, reducing the amount of machining required.
Induction hardening is a process that takes advantage of the whirling process. The induction hardening process utilizes alternating current (AC) to cause eddy currents in metallic objects. The higher the frequency, the higher the surface temperature. The electrical frequency is monitored through sensors to prevent overheating. Induction heating is programmable so that only certain parts of the worm shaft will harden.
Common tangent at an arbitrary point on both surfaces of the worm wheel
A worm gear consists of 2 helical segments with a helix angle equal to 90 degrees. This shape allows the worm to rotate with more than 1 tooth per rotation. A worm’s helix angle is usually close to 90 degrees and the body length is fairly long in the axial direction. A worm gear with a lead angle g has similar properties as a screw gear with a helix angle of 90 degrees.
The axial cross section of a worm gear is not conventionally trapezoidal. Instead, the linear part of the oblique side is replaced by cycloid curves. These curves have a common tangent near the pitch line. The worm wheel is then formed by gear cutting, resulting in a gear with 2 meshing surfaces. This worm gear can rotate at high speeds and still operate quietly.
A worm wheel with a cycloid pitch is a more efficient worm gear. It reduces friction between the worm and the gear, resulting in greater durability, improved operating efficiency, and reduced noise. This pitch line also helps the worm wheel engage more evenly and smoothly. Moreover, it prevents interference with their appearance. It also makes worm wheel and gear engagement smoother.
Calculation of worm shaft deflection
There are several methods for calculating worm shaft deflection, and each method has its own set of disadvantages. These commonly used methods provide good approximations but are inadequate for determining the actual worm shaft deflection. For example, these methods do not account for the geometric modifications to the worm, such as its helical winding of teeth. Furthermore, they overestimate the stiffening effect of the gearing. Hence, efficient thin worm shaft designs require other approaches.
Fortunately, several methods exist to determine the maximum worm shaft deflection. These methods use the finite element method, and include boundary conditions and parameter calculations. Here, we look at a couple of methods. The first method, DIN 3996, calculates the maximum worm shaft deflection based on the test results, while the second one, AGMA 6022, uses the root diameter of the worm as the equivalent bending diameter.
The second method focuses on the basic parameters of worm gearing. We’ll take a closer look at each. We’ll examine worm gearing teeth and the geometric factors that influence them. Commonly, the range of worm gearing teeth is 1 to four, but it can be as large as twelve. Choosing the teeth should depend on optimization requirements, including efficiency and weight. For example, if a worm gearing needs to be smaller than the previous model, then a small number of teeth will suffice.
