Product Description
1 Product requirements
The training platform is based on the real object of the driving system of the vehicle, including detection panel, motor driving system, gear switch, acceleration control device, DC contactor, etc., which can truly show the composition structure and working process of the driving system of new energy vehicles.
2 Functional requirements
a. The real and operable new energy vehicle drive system is connected with other platforms of the system to complete the composition structure and working process of the new energy vehicle drive system.
b. The measuring panel of the training platform is painted with color spray circuit diagram, which is made of 8mm thick high-strength acrylic plate. It has the characteristics of large temperature difference resistance, wear resistance, moisture resistance, corrosion resistance, not easy to deformation, long service life, bright color and not easy to fade. The panel is printed with color circuit diagram that will never fade, and the surface is sprayed with varnish; Students can intuitively compare the circuit diagram and the real object of the electric vehicle drive system to understand and analyze the working principle of the control system.
c. A detection terminal is installed on the panel of the training platform, which can directly detect the electrical signals of the pins of each control unit, such as resistance, voltage, current, frequency signals, etc.
3 Process standard: the circuit diagram board has the function of circuit analysis, the graphic circuit is made of acrylic plate by laser spraying, and the frame is pressed and inlaid with aluminum alloy frame, which is beautiful and generous. The base of the bench is assembled with national standard aluminum profiles. The base is equipped with universal moving casters with reasonable line distribution. The electrical installation is organized and implemented in strict accordance with GB national electrical industry standards.
4 Teaching function:
Skills training program:
a. Training items for disassembly and assembly of motor assembly;
b. Training project on disassembly and assembly of mechanical transmission assembly;
c. Be familiar with the name, structure and principle of various parts;
Testing teaching items:
a. Driving system working signal voltage detection teaching project
b. Teaching project of driving motor working speed signal detection
c. Drive system fault diagnosis and detection teaching project
d. Driving motor temperature signal detection teaching project
5 Reference pictures (pictures are for reference only, subject to the real object):
6 Supporting virtual reality integrated teaching system
a. Teaching effect and concept: the automobile virtual reality integration integrated teaching system aims to make theoretical teaching and practical teaching interact and integrate. On the 1 hand, improve the practical ability of theoretical teachers, train their theoretical level, and cultivate a high-quality teaching team. On the other hand, teachers integrate theoretical knowledge into practical teaching, let students learn by doing, understand theoretical knowledge and master skills in learning and practice, and break the boundary between teachers and students. Teachers are among and around students. This way can greatly stimulate students’ enthusiasm for learning, enhance students’ interest in learning, and actively summarize students while learning and practicing, It can achieve twice the result with half the effort. The integration of theory and practice teaching software breaks through the disconnection between theory and practice, and the teaching links are relatively concentrated. It emphasizes giving full play to the leading role of teachers. By setting teaching tasks and teaching objectives, teachers and students can teach, learn and do at the same time, build a quality and skill training framework in the whole process, enrich classroom teaching and practical teaching links, and improve teaching quality. In the whole teaching process, theory and practice are carried out alternately, and intuition and abstraction appear alternately. There is no fixed principle of “reality before reason” or “reason before reality”, but there is reality in reason and reason in reality. Highlight the cultivation of students’ practical ability and professional skills, and fully mobilize and stimulate students’ interest in learning.
b. Composition: the virtual reality integration teaching platform is composed of wireless remote communication module, training system and theory reality integration teaching software.
c. Wireless remote communication function: it has industrial design and is applicable to all kinds of teaching equipment. It has built-in software and hardware watchdog and does not crash or drop the line. Support transparent data transmission. Communication mode: WiFi hotspot based on IEEE802.11 standard is adopted, effective communication distance: open space: 80m, interface rate: 150m, frequency range: 2.412ghz-2.484ghz.
4. Fault system
4.1 the fault system adopts the way of graphical fault setting, and is configured with standard circuit diagram, which generally corresponds to the panel diagram of training equipment. Teachers can directly set or clear faults through the circuit diagram. It has the characteristics of intuitive operation and concealed fault setting.
4.2 teachers can set faults through single point fault setting, combined fault setting, assessment fault setting and other methods, and send fault setting instructions to the training equipment remotely through WiFi. Students can measure the voltage and resistance of relevant systems of the training equipment through mechanical instruments multimeter, and use oscilloscope to observe the waveform curves of different signal amplitudes varying with time, It can also be used to test various electric quantities, such as voltage, current, frequency, phase difference and adjustment amplitude. At the same time, it can read fault codes and analyze data flow through diagnostic equipment to judge fault points, analyze their causes and eliminate them, which greatly improves the students’ initiative and judgment skills. In the fault setting stage, teachers can conduct routine assessment on the troubleshooting process of students by limiting the troubleshooting time, which is helpful to formulate effective training measures, so as to improve the results of Vocational and technical training.
4.3 the interface of the fault system is clear and easy to understand. The fault status identification has options such as “open circuit”, “virtual connection”, “release” and “close” respectively to truly simulate the typical fault phenomena of the training equipment.
4.4 the fault system does not have the memory function by default to avoid stopping in the middle of the training and forgetting to cancel the fault, which will cause hard fault to the training equipment and affect the normal operation and later training.
Different parts of the drive shaft
The driveshaft is the flexible rod that transmits torque between the transmission and the differential. The term drive shaft may also refer to a cardan shaft, a transmission shaft or a propeller shaft. Parts of the drive shaft are varied and include:
The driveshaft is a flexible rod that transmits torque from the transmission to the differential
When the driveshaft in your car starts to fail, you should seek professional help as soon as possible to fix the problem. A damaged driveshaft can often be heard. This noise sounds like “tak tak” and is usually more pronounced during sharp turns. However, if you can’t hear the noise while driving, you can check the condition of the car yourself.
The drive shaft is an important part of the automobile transmission system. It transfers torque from the transmission to the differential, which then transfers it to the wheels. The system is complex, but still critical to the proper functioning of the car. It is the flexible rod that connects all other parts of the drivetrain. The driveshaft is the most important part of the drivetrain, and understanding its function will make it easier for you to properly maintain your car.
Driveshafts are used in different vehicles, including front-wheel drive, four-wheel drive, and front-engine rear-wheel drive. Drive shafts are also used in motorcycles, locomotives and ships. Common front-engine, rear-wheel drive vehicle configurations are shown below. The type of tube used depends on the size, speed and strength of the drive shaft.
The output shaft is also supported by the output link, which has 2 identical supports. The upper part of the drive module supports a large tapered roller bearing, while the opposite flange end is supported by a parallel roller bearing. This ensures that the torque transfer between the differentials is efficient. If you want to learn more about car differentials, read this article.
It is also known as cardan shaft, propeller shaft or drive shaft
A propshaft or propshaft is a mechanical component that transmits rotation or torque from an engine or transmission to the front or rear wheels of a vehicle. Because the axes are not directly connected to each other, it must allow relative motion. Because of its role in propelling the vehicle, it is important to understand the components of the driveshaft. Here are some common types.
Isokinetic Joint: This type of joint guarantees that the output speed is the same as the input speed. To achieve this, it must be mounted back-to-back on a plane that bisects the drive angle. Then mount the 2 gimbal joints back-to-back and adjust their relative positions so that the velocity changes at 1 joint are offset by the other joint.
Driveshaft: The driveshaft is the transverse shaft that transmits power to the front wheels. Driveshaft: The driveshaft connects the rear differential to the transmission. The shaft is part of a drive shaft assembly that includes a drive shaft, a slip joint, and a universal joint. This shaft provides rotational torque to the drive shaft.
Dual Cardan Joints: This type of driveshaft uses 2 cardan joints mounted back-to-back. The center yoke replaces the intermediate shaft. For the duplex universal joint to work properly, the angle between the input shaft and the output shaft must be equal. Once aligned, the 2 axes will operate as CV joints. An improved version of the dual gimbal is the Thompson coupling, which offers slightly more efficiency at the cost of added complexity.
It transmits torque at different angles between driveline components
A vehicle’s driveline consists of various components that transmit power from the engine to the wheels. This includes axles, propshafts, CV joints and differentials. Together, these components transmit torque at different angles between driveline components. A car’s powertrain can only function properly if all its components work in harmony. Without these components, power from the engine would stop at the transmission, which is not the case with a car.
The CV driveshaft design provides smoother operation at higher operating angles and extends differential and transfer case life. The assembly’s central pivot point intersects the joint angle and transmits smooth rotational power and surface speed through the drivetrain. In some cases, the C.V. “U” connector. Drive shafts are not the best choice because the joint angles of the “U” joints are often substantially unequal and can cause torsional vibration.
Driveshafts also have different names, including driveshafts. A car’s driveshaft transfers torque from the transmission to the differential, which is then distributed to other driveline components. A power take-off (PTO) shaft is similar to a prop shaft. They transmit mechanical power to connected components. They are critical to the performance of any car. If any of these components are damaged, the entire drivetrain will not function properly.
A car’s powertrain can be complex and difficult to maintain. Adding vibration to the drivetrain can cause premature wear and shorten overall life. This driveshaft tip focuses on driveshaft assembly, operation, and maintenance, and how to troubleshoot any problems that may arise. Adding proper solutions to pain points can extend the life of the driveshaft. If you’re in the market for a new or used car, be sure to read this article.
it consists of several parts
“It consists of several parts” is 1 of 7 small prints. This word consists of 10 letters and is 1 of the hardest words to say. However, it can be explained simply by comparing it to a cow’s kidney. The cocoa bean has several parts, and the inside of the cocoa bean before bursting has distinct lines. This article will discuss the different parts of the cocoa bean and provide a fun way to learn more about the word.
Replacement is expensive
Replacing a car’s driveshaft can be an expensive affair, and it’s not the only part that needs servicing. A damaged drive shaft can also cause other problems. This is why getting estimates from different repair shops is essential. Often, a simple repair is cheaper than replacing the entire unit. Listed below are some tips for saving money when replacing a driveshaft. Listed below are some of the costs associated with repairs:
First, learn how to determine if your vehicle needs a driveshaft replacement. Damaged driveshaft components can cause intermittent or lack of power. Additionally, improperly installed or assembled driveshaft components can cause problems with the daily operation of the car. Whenever you suspect that your car needs a driveshaft repair, seek professional advice. A professional mechanic will have the knowledge and experience needed to properly solve the problem.
Second, know which parts need servicing. Check the u-joint bushing. They should be free of crumbs and not cracked. Also, check the center support bearing. If this part is damaged, the entire drive shaft needs to be replaced. Finally, know which parts to replace. The maintenance cost of the drive shaft is significantly lower than the maintenance cost. Finally, determine if the repaired driveshaft is suitable for your vehicle.
If you suspect your driveshaft needs service, make an appointment with a repair shop as soon as possible. If you are experiencing vibration and rough riding, driveshaft repairs may be the best way to prevent costly repairs in the future. Also, if your car is experiencing unusual noise and vibration, a driveshaft repair may be a quick and easy solution. If you don’t know how to diagnose a problem with your car, you can take it to a mechanic for an appointment and a quote.
