China manufacturer 140*180*5mm AXK140180 High Limiting Speed Needle Roller Thrust Bearing Used In Automobile Drive Trains with Good quality

Product Description

140*180*5mm AXK140180 High Limiting Speed Needle Roller Thrust Bearing Used In Automobile
Drive Trains

                                                          Application

        

            Machine Tools                                                                           Cars and Light Trucks  

            Trucks, Trailers and Buses                                                      Two and Three Wheelers
 

Needle roller thrust bearings are fitted with a form-stable cage to reliably retain and CZPT a large number of needle rollers.

Needle roller thrust bearings provide a high degree of stiffness within a minimum axial space.

In applications where the faces of adjacent machine components can serve as raceways, needle roller thrust bearings take up
no more space than a conventional thrust washer.

Needle Roller Thrust Bearings with Washers Specification

Product Name Needle Roller Thrust Bearings with Washers
Shaft Diameter Available for 10 ≤ d ≤ 50 mm
Material Bearing Steel  (GCr15)
Suitable Washers LS, AS, GS 811 or WS 811 series
Cage Steel
Features Accommodate heavy axial loads and CZPT loads
Certification ISO 9001:2008
Packing 1.Neutral Packing Bearing  2.Industrial Packing  3.Commercial Packing Bearing  4.Customize
Delivery Time 30 – 45 Days After The Order is Confirmed
Shippment 1.By Sea  2.By Air  3.By Express
Website http://hlimachinery

Model Thrust Washer Boundary Dimensions (mm) Basic Load Rating (KN) Limited Mass
Speed
d D Dw B1 B a Eb Ea C Co rpm kg
AXK571TN AS571   4 14 2 1     5 13 3.52 6.4 16800 0.001
AXK571TN AS571   5 15 2 1     6 14 3.8 7.36 16800 0.001
AXK0619TN AS0619 LS0619 6 19 2 1 2.75 0.3 7 18 5.44 12.4 15200 0.004
AXK0821TN AS0821 LS0821 8 21 2 1 2.75 0.3 9 20 6.24 15.52 14400 0.004
AXK1571 AS1571 LS1571 10 24 2 1 2.75 0.3 12 23 7.36 20.4 13600 0.007
AXK1226 AS1226 LS1226 12 26 2 1 2.75 0.3 14 25 7.92 23.2 12000 0.008
AXK1528 AS1528 LS1528 15 28 2 1 2.75 0.3 17 27 9.04 28.8 10400 0.009
AXK1730 AS1730 LS1730 17 30 2 1 2.75 0.3 19 29 9.52 31.6 9600 0.009
AXK2035 AS2035 LS2035 20 35 2 1 2.75 0.3 22 34 10.48 37.2 8000 0.013
AXK2542 AS2542 LS2542 25 42 2 1 3 0.6 29 41 11.76 46.4 6800 0.019
AXK3047 AS3047 LS3047 30 47 2 1 3 0.6 34 46 13.04 56 6000 0.571
AXK3552 AS3552 LS3552 35 52 2 1 3.5 0.6 39 51 14.24 64.8 5200 0.571
AXK4060 AS4060 LS4060 40 60 3 1 3.5 0.6 45 58 22.4 91.2 4800 0.04
AXK4565 AS4565 LS4565 45 65 3 1 4 0.6 50 63 24 102.4 4000 0.05
AXK5070 AS5070 LS5070 50 70 3 1 4 0.6 55 68 25.6 114.4 3840 0.055
AXK5578 AS5578 LS5578 55 78 3 1 5 0.6 60 76 30.4 148.8 3440 0.088
AXK6085 AS6085 LS6085 60 85 3 1 4.75 1 65 83 35.6 187.2 3200 0.097
AXK6590 AS6590 LS6590 65 90 3 1 5.25 1 70 88 37.2 204 2960 0.115
AXK7095 AS7095 LS7095 70 95 4 1 5.25 1 74 93 43.2 204 2800 0.123
AXK75100 AS75100 LS75100 75 100 4 1 5.75 1 79 98 44 212 2640 0.142
AXK85715 AS85715 LS85715 80 105 4 1 5.75 1 84 103 44.8 224 2480 0.151
AXK85110 AS85110 LS85110 85 110 4 1 5.75 1 89 108 46.4 232 2400 0.159
AXK90120 AS90120 LS90120 90 120 4 1 6.5 1 94 118 58.4 324 2160 0.234
AXK100135 AS100135 LS100135 100 135 4 1 7 1 105 133 72.8 448 2000 0.35
AXK110145 AS110145 LS110145 110 145 4 1 7 1 115 143 77.6 496 1840 0.385
AXK120155 AS120155 LS120155 120 155 4 1 7 1 125 153 81.6 544 1680 0.415
AXK130170 AS130170 LS130170 130 170 5 1 9 1 136 167 106.4 672 1520 0.663
AXK140180 AS140180 LS140180 140 180 5 1 9.5 1 146 177 110.4 720 1440 0.749
AXK150190 AS150190 LS150190 150 190 5 1 9.5 1 156 187 114.4 768 1360 0.796
AXK165710 AS165710 LS165710 160 200 5 1 9.5 1 166 197 118.4 816 1280 0.842

                                                       

                                                                   About Us

HENGLI Machinery Company is a well-established Chinese bearing supplier. We design, manufacture and wholesale bearings.
Our specialized manufacturer of Spherical Roller Bearing Cylindrical Roller Bearing, XIHU (WEST LAKE) DIS. Rolling Bearing Co., Ltd was
established in 1970 and is accredited by the Chinese Ministry of Machine Building.

We invested in 2 additional specialized bearing factories, which allow us to provide our clients with top of the line products such as 
Needle Roller Bearings, Cam Follower Bearings, Thrust Bearing, Rod Ends Bearings, Ball Joint Bearings, Tapered Roller
Bearings, 
Wheel Hub Bearings and Non-Standard Bearings.

 

FAQ
Q1 – What is our advantages?

     A    – Manufacturer – Do it only with the Best;

            -Your Choice make different. 

Q2 – Our Products

 A   – Spherical Roller Bearing, Cylindrical Roller Bearing, Needle Roller Bearing, Cam Followers, Thrust Bearing

      – Spherical Plain Bearing, Rod End, Ball Joint, Wheel Hub, Tapered Roller Bearing

Q3 – Process of our production

 A – Heat Treatment – Grinding – Parts Inspection – Assembly – Final Inspection – Packing

Q4 – How to customize bearing(non-standard) from your company?

 A -We offer OEM,Customized(Non-standard) service and you need to provide drawing and detailed Technical Data.

Q5 –   What should I care before installation?

 A   – Normally, the preservative with which new bearings are coated before leaving the factory does not need to be

        removed; it is only necessary to wipe off the outside cylin­drical surface and bore, if the grease is not compatible

        with the preservative, it is necessary to wash and carefully dry the bearing.

      -Bearings should be installed in a dry, dust-free room away from metal working or other machines producing

        swarf and dust.

Q6 – How to stock and maintenance my bearings right? 

 A   – Do not store bearings directly on concrete floors, where water can condense and collect on the bearing;

      -Store the bearings on a pallet or shelf, in an area where the bearings will not be subjected to high humidity

       or sudden and severe temperature changes that may result in condensation forming;

      -Always put oiled paper or, if not available, plastic sheets between rollers and cup races of tapered roller bearings.

 

How to Replace the Drive Shaft

Several different functions in a vehicle are critical to its functioning, but the driveshaft is probably the part that needs to be understood the most. A damaged or damaged driveshaft can damage many other auto parts. This article will explain how this component works and some of the signs that it may need repair. This article is for the average person who wants to fix their car on their own but may not be familiar with mechanical repairs or even driveshaft mechanics. You can click the link below for more information.
air-compressor

Repair damaged driveshafts

If you own a car, you should know that the driveshaft is an integral part of the vehicle’s driveline. They ensure efficient transmission of power from the engine to the wheels and drive. However, if your driveshaft is damaged or cracked, your vehicle will not function properly. To keep your car safe and running at peak efficiency, you should have it repaired as soon as possible. Here are some simple steps to replace the drive shaft.
First, diagnose the cause of the drive shaft damage. If your car is making unusual noises, the driveshaft may be damaged. This is because worn bushings and bearings support the drive shaft. Therefore, the rotation of the drive shaft is affected. The noise will be squeaks, dings or rattles. Once the problem has been diagnosed, it is time to repair the damaged drive shaft.
Professionals can repair your driveshaft at relatively low cost. Costs vary depending on the type of drive shaft and its condition. Axle repairs can range from $300 to $1,000. Labor is usually only around $200. A simple repair can cost between $150 and $1700. You’ll save hundreds of dollars if you’re able to fix the problem yourself. You may need to spend a few more hours educating yourself about the problem before handing it over to a professional for proper diagnosis and repair.
The cost of repairing a damaged driveshaft varies by model and manufacturer. It can cost as much as $2,000 depending on parts and labor. While labor costs can vary, parts and labor are typically around $70. On average, a damaged driveshaft repair costs between $400 and $600. However, these parts can be more expensive than that. If you don’t want to spend money on unnecessarily expensive repairs, you may need to pay a little more.
air-compressor

Learn how drive shafts work

While a car engine may be 1 of the most complex components in your vehicle, the driveshaft has an equally important job. The driveshaft transmits the power of the engine to the wheels, turning the wheels and making the vehicle move. Driveshaft torque refers to the force associated with rotational motion. Drive shafts must be able to withstand extreme conditions or they may break. Driveshafts are not designed to bend, so understanding how they work is critical to the proper functioning of the vehicle.
The drive shaft includes many components. The CV connector is 1 of them. This is the last stop before the wheels spin. CV joints are also known as “doughnut” joints. The CV joint helps balance the load on the driveshaft, the final stop between the engine and the final drive assembly. Finally, the axle is a single rotating shaft that transmits power from the final drive assembly to the wheels.
Different types of drive shafts have different numbers of joints. They transmit torque from the engine to the wheels and must accommodate differences in length and angle. The drive shaft of a front-wheel drive vehicle usually includes a connecting shaft, an inner constant velocity joint and an outer fixed joint. They also have anti-lock system rings and torsional dampers to help them run smoothly. This guide will help you understand the basics of driveshafts and keep your car in good shape.
The CV joint is the heart of the driveshaft, it enables the wheels of the car to move at a constant speed. The connector also helps transmit power efficiently. You can learn more about CV joint driveshafts by looking at the top 3 driveshaft questions
The U-joint on the intermediate shaft may be worn or damaged. Small deviations in these joints can cause slight vibrations and wobble. Over time, these vibrations can wear out drivetrain components, including U-joints and differential seals. Additional wear on the center support bearing is also expected. If your driveshaft is leaking oil, the next step is to check your transmission.
The drive shaft is an important part of the car. They transmit power from the engine to the transmission. They also connect the axles and CV joints. When these components are in good condition, they transmit power to the wheels. If you find them loose or stuck, it can cause the vehicle to bounce. To ensure proper torque transfer, your car needs to stay on the road. While rough roads are normal, bumps and bumps are common.
air-compressor

Common signs of damaged driveshafts

If your vehicle vibrates heavily underneath, you may be dealing with a faulty propshaft. This issue limits your overall control of the vehicle and cannot be ignored. If you hear this noise frequently, the problem may be the cause and should be diagnosed as soon as possible. Here are some common symptoms of a damaged driveshaft. If you experience this noise while driving, you should have your vehicle inspected by a mechanic.
A clanging sound can also be 1 of the signs of a damaged driveshaft. A ding may be a sign of a faulty U-joint or center bearing. This can also be a symptom of worn center bearings. To keep your vehicle safe and functioning properly, it is best to have your driveshaft inspected by a certified mechanic. This can prevent serious damage to your car.
A worn drive shaft can cause difficulty turning, which can be a major safety issue. Fortunately, there are many ways to tell if your driveshaft needs service. The first thing you can do is check the u-joint itself. If it moves too much or too little in any direction, it probably means your driveshaft is faulty. Also, rust on the bearing cap seals may indicate a faulty drive shaft.
The next time your car rattles, it might be time for a mechanic to check it out. Whether your vehicle has a manual or automatic transmission, the driveshaft plays an important role in your vehicle’s performance. When 1 or both driveshafts fail, it can make the vehicle unsafe or impossible to drive. Therefore, you should have your car inspected by a mechanic as soon as possible to prevent further problems.
Your vehicle should also be regularly lubricated with grease and chain to prevent corrosion. This will prevent grease from escaping and causing dirt and grease to build up. Another common sign is a dirty driveshaft. Make sure your phone is free of debris and in good condition. Finally, make sure the driveshaft chain and cover are in place. In most cases, if you notice any of these common symptoms, your vehicle’s driveshaft should be replaced.
Other signs of a damaged driveshaft include uneven wheel rotation, difficulty turning the car, and increased drag when trying to turn. A worn U-joint also inhibits the ability of the steering wheel to turn, making it more difficult to turn. Another sign of a faulty driveshaft is the shuddering noise the car makes when accelerating. Vehicles with damaged driveshafts should be inspected as soon as possible to avoid costly repairs.

China manufacturer 140*180*5mm AXK140180 High Limiting Speed Needle Roller Thrust Bearing Used In Automobile Drive Trains     with Good qualityChina manufacturer 140*180*5mm AXK140180 High Limiting Speed Needle Roller Thrust Bearing Used In Automobile Drive Trains     with Good quality