China high quality 36V 350W Jiangsu Changzhou Conversion Kit Safeway Electric Bike with Rear Drive Motor near me manufacturer

Product Description

36V 350W ZheJiang HangZhou conversion kit safeway electric bike with Rear Drive motor

  1 Product Specification  

Electric Specification Bodywork Specification
Motor Type Rear Drive Frame Aluminum Alloy 6061#
Motor Power 36V350W Tyres 26″*1.95inch KENDA
Working Style PAS & Throttle,1:1 with 0-5 Level Rim Alloy Single Wall
Controller 36V15A Brake F/R: Disc brake 
Display LCD display  Brake Lever Cut-off while braking 
Light F: LED light QD139-2 Front Fork Steel, / Seat post: Steel 
Battery  Lithium battery Samung 36V10.4AH Derailleur Shimano 7 speed tourney
Charger 50-60HZ, AC90-240V Other Trumb Throttle
Performance Business Item
Max Speed 25-28km/h Available Colors Black,white, silver, red, etc
Range 35-45KM Body Size  
Max Loading 100KG Packing Size 1550*280*870
Climbing 20% N.W / G.W 28kgs/38kgs
Charge Time 5-6H / Cricle Life > 600times Container Load  

 2 Company information
    HangZhou Merry Gold Machinary Co.,ltd, is a manufacturer and trader specialized in machinery and electronics products such as ebike electric bicycle. We mainly offer motors, electric bicycles,electric vehicles and its spare parts, bicycle and its spare parts etc. We have exported our electric bikes and its rated products to over 60 countries in the world, especially in US, Canada, Mexico, France, Spain, Italy, Germany, Australia, New Zealand, Russia, North Europe etc All of our products can comply with international quality standards and are greatly meeting in a variety of markets around the world. For example, we have EN15194 European certificate, CE certificate and EEC certificate. These certificates ensure us can enter into any country. We can also provide OEMand ODM service if you need. We are located in HangZhou city, ZheJiang province, which is about 150km from ZheJiang city. If you are interested in any of our products or discuss a customized order, please feel free to contact us and kindly get back your comments to us. We are sure any of your feedback will get our prompt attention & reply. We are looking forward to establishing successful business relationships with clients all over the world.

3 packaging and shipping
We fold electric bicycle and wrap them with foamed plastic films and pack them in cartons
The electric bikes ordered by our clients can be shipped by sea, air and train.

4 Our service

1. OEM Manufacturing Welcome: product, package, etc…
2. Sample Order
3. All inquiries will be replied in 24 hours
4. After the sending,we will track the shipment for you each 2 days until it arrives. When you got the electric bicycle, please test them and give us a feedback. if you have any question,  please contact us. we will offer the solve way for you.

5 Certificates

6 FAQ

Q1. What is your terms of packing?
A: Generally,electric bicycle is packed with foam protection and foam block inside, cartons outside. If you have any legally registered
patent, we can pack the electric bicycle in your branded boxed after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of electric bicycle and packages before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 30-60 days after the receipt of deposit payment. If there are materials stocked for this style, then it
takes around 15-30 days.

Q5. Can you produce according to the samples?
A: Yes, the production can be arranged depending on your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: The samples can be supplied if there are ready parts in stock, and the client will cover the sample and courier cost.

Q7. Do you test all of your electric bike bicycle before delivery?
A: Yes, the goods are all 100% test and inspected before delivery.

Q8. How do you make our business long-term and good relationships?
A: 1. We keep quality and competitive price to ensure our clients’ benefit;
2. We respect every customer as our friend and we sincerely do business no matter where they come from.

 

 

What Are Screw Shaft Threads?

A screw shaft is a threaded part used to fasten other components. The threads on a screw shaft are often described by their Coefficient of Friction, which describes how much friction is present between the mating surfaces. This article discusses these characteristics as well as the Material and Helix angle. You’ll have a better understanding of your screw shaft’s threads after reading this article. Here are some examples. Once you understand these details, you’ll be able to select the best screw nut for your needs.
screwshaft

Coefficient of friction between the mating surfaces of a nut and a screw shaft

There are 2 types of friction coefficients. Dynamic friction and static friction. The latter refers to the amount of friction a nut has to resist an opposing motion. In addition to the material strength, a higher coefficient of friction can cause stick-slip. This can lead to intermittent running behavior and loud squeaking. Stick-slip may lead to a malfunctioning plain bearing. Rough shafts can be used to improve this condition.
The 2 types of friction coefficients are related to the applied force. When applying force, the applied force must equal the nut’s pitch diameter. When the screw shaft is tightened, the force may be removed. In the case of a loosening clamp, the applied force is smaller than the bolt’s pitch diameter. Therefore, the higher the property class of the bolt, the lower the coefficient of friction.
In most cases, the screwface coefficient of friction is lower than the nut face. This is because of zinc plating on the joint surface. Moreover, power screws are commonly used in the aerospace industry. Whether or not they are power screws, they are typically made of carbon steel, alloy steel, or stainless steel. They are often used in conjunction with bronze or plastic nuts, which are preferred in higher-duty applications. These screws often require no holding brakes and are extremely easy to use in many applications.
The coefficient of friction between the mating surfaces of t-screws is highly dependent on the material of the screw and the nut. For example, screws with internal lubricated plastic nuts use bearing-grade bronze nuts. These nuts are usually used on carbon steel screws, but can be used with stainless steel screws. In addition to this, they are easy to clean.

Helix angle

In most applications, the helix angle of a screw shaft is an important factor for torque calculation. There are 2 types of helix angle: right and left hand. The right hand screw is usually smaller than the left hand one. The left hand screw is larger than the right hand screw. However, there are some exceptions to the rule. A left hand screw may have a greater helix angle than a right hand screw.
A screw’s helix angle is the angle formed by the helix and the axial line. Although the helix angle is not usually changed, it can have a significant effect on the processing of the screw and the amount of material conveyed. These changes are more common in 2 stage and special mixing screws, and metering screws. These measurements are crucial for determining the helix angle. In most cases, the lead angle is the correct angle when the screw shaft has the right helix angle.
High helix screws have large leads, sometimes up to 6 times the screw diameter. These screws reduce the screw diameter, mass, and inertia, allowing for higher speed and precision. High helix screws are also low-rotation, so they minimize vibrations and audible noises. But the right helix angle is important in any application. You must carefully choose the right type of screw for the job at hand.
If you choose a screw gear that has a helix angle other than parallel, you should select a thrust bearing with a correspondingly large center distance. In the case of a screw gear, a 45-degree helix angle is most common. A helix angle greater than zero degrees is also acceptable. Mixing up helix angles is beneficial because it allows for a variety of center distances and unique applications.
screwshaft

Thread angle

The thread angle of a screw shaft is measured from the base of the head of the screw to the top of the screw’s thread. In America, the standard screw thread angle is 60 degrees. The standard thread angle was not widely adopted until the early twentieth century. A committee was established by the Franklin Institute in 1864 to study screw threads. The committee recommended the Sellers thread, which was modified into the United States Standard Thread. The standardized thread was adopted by the United States Navy in 1868 and was recommended for construction by the Master Car Builders’ Association in 1871.
Generally speaking, the major diameter of a screw’s threads is the outside diameter. The major diameter of a nut is not directly measured, but can be determined with go/no-go gauges. It is necessary to understand the major and minor diameters in relation to each other in order to determine a screw’s thread angle. Once this is known, the next step is to determine how much of a pitch is necessary to ensure a screw’s proper function.
Helix angle and thread angle are 2 different types of angles that affect screw efficiency. For a lead screw, the helix angle is the angle between the helix of the thread and the line perpendicular to the axis of rotation. A lead screw has a greater helix angle than a helical one, but has higher frictional losses. A high-quality lead screw requires a higher torque to rotate. Thread angle and lead angle are complementary angles, but each screw has its own specific advantages.
Screw pitch and TPI have little to do with tolerances, craftsmanship, quality, or cost, but rather the size of a screw’s thread relative to its diameter. Compared to a standard screw, the fine and coarse threads are easier to tighten. The coarser thread is deeper, which results in lower torques. If a screw fails because of torsional shear, it is likely to be a result of a small minor diameter.

Material

Screws have a variety of different sizes, shapes, and materials. They are typically machined on CNC machines and lathes. Each type is used for different purposes. The size and material of a screw shaft are influenced by how it will be used. The following sections give an overview of the main types of screw shafts. Each 1 is designed to perform a specific function. If you have questions about a specific type, contact your local machine shop.
Lead screws are cheaper than ball screws and are used in light-duty, intermittent applications. Lead screws, however, have poor efficiency and are not recommended for continuous power transmission. But, they are effective in vertical applications and are more compact. Lead screws are typically used as a kinematic pair with a ball screw. Some types of lead screws also have self-locking properties. Because they have a low coefficient of friction, they have a compact design and very few parts.
Screws are made of a variety of metals and alloys. Steel is an economical and durable material, but there are also alloy steel and stainless steel types. Bronze nuts are the most common and are often used in higher-duty applications. Plastic nuts provide low-friction, which helps reduce the drive torques. Stainless steel screws are also used in high-performance applications, and may be made of titanium. The materials used to create screw shafts vary, but they all have their specific functions.
Screws are used in a wide range of applications, from industrial and consumer products to transportation equipment. They are used in many different industries, and the materials they’re made of can determine their life. The life of a screw depends on the load that it bears, the design of its internal structure, lubrication, and machining processes. When choosing screw assemblies, look for a screw made from the highest quality steels possible. Usually, the materials are very clean, so they’re a great choice for a screw. However, the presence of imperfections may cause a normal fatigue failure.
screwshaft

Self-locking features

Screws are known to be self-locking by nature. The mechanism for this feature is based on several factors, such as the pitch angle of the threads, material pairing, lubrication, and heating. This feature is only possible if the shaft is subjected to conditions that are not likely to cause the threads to loosen on their own. The self-locking ability of a screw depends on several factors, including the pitch angle of the thread flank and the coefficient of sliding friction between the 2 materials.
One of the most common uses of screws is in a screw top container lid, corkscrew, threaded pipe joint, vise, C-clamp, and screw jack. Other applications of screw shafts include transferring power, but these are often intermittent and low-power operations. Screws are also used to move material in Archimedes’ screw, auger earth drill, screw conveyor, and micrometer.
A common self-locking feature for a screw is the presence of a lead screw. A screw with a low PV value is safe to operate, but a screw with high PV will need a lower rotation speed. Another example is a self-locking screw that does not require lubrication. The PV value is also dependent on the material of the screw’s construction, as well as its lubrication conditions. Finally, a screw’s end fixity – the way the screw is supported – affects the performance and efficiency of a screw.
Lead screws are less expensive and easier to manufacture. They are a good choice for light-weight and intermittent applications. These screws also have self-locking capabilities. They can be self-tightened and require less torque for driving than other types. The advantage of lead screws is their small size and minimal number of parts. They are highly efficient in vertical and intermittent applications. They are not as accurate as lead screws and often have backlash, which is caused by insufficient threads.

China high quality 36V 350W Jiangsu Changzhou Conversion Kit Safeway Electric Bike with Rear Drive Motor   near me manufacturer China high quality 36V 350W Jiangsu Changzhou Conversion Kit Safeway Electric Bike with Rear Drive Motor   near me manufacturer